✅✅✅[ANN] Nanominer v3.8.4: Intel Arc support for ethash✅✅✅

[nik-qz]

Hello
I can’t set the static voltage of the core, for example, to 1300 MHz, the program does not accept a value, I assume this is due to the hardwired reduction limit from -525 to +525 and my setting is 1300 lower than the nominal frequency in 1990, please correct this or increase the range downward
version 3.7.7
---
update
unfortunately reducing the core frequency does not reduce the voltage, then these settings do not make much sense

lowering the voltage is obtained only by lowering the power limit, BUT if mining takes place of two coins such as zil and ergo, then during the ergo mining, the power limit is set correctly, and during the mining of zil, the power limit is not enough and the hash is greatly reduced, all this is complemented by the fact that the program does not understand the second line of powerLimits in the [zil] settings and uses only the powerLimits line from the [autolykos] settings

[nanominer.official]

Finally there is a single build for all CUDA versions.
Also, we added Kaspa and now nanominer suports dual, triple and quad mining.

[nik-qz]

Finally there is a single build for all CUDA versions.
Also, we added Kaspa and now nanominer suports dual, triple and quad mining.

version 3.8.0 in triple maning mode does not work well
there was some kind of failure (perhaps from the program itself or from the fact that one of the cards number 2 fell off) after which everything went wrong, the found shares were not accepted, as a result, more than six hours of work wasted
https://ufile.io/avxz53eb log

[sxemini]

Finally there is a single build for all CUDA versions.
Also, we added Kaspa and now nanominer suports dual, triple and quad mining.

version 3.8.0 in triple maning mode does not work well
there was some kind of failure (perhaps from the program itself or from the fact that one of the cards number 2 fell off) after which everything went wrong, the found shares were not accepted, as a result, more than six hours of work wasted
https://ufile.io/avxz53eb log

Use other miners, nanominer is not worth. BZminer, teamredminer, srbminer, rigel, gminer all can handle mining 3 coins at the same time with a much higher hashrate and for sure a much better support.

[nik-qz]

Finally there is a single build for all CUDA versions.
Also, we added Kaspa and now nanominer suports dual, triple and quad mining.

version 3.8.0 in triple maning mode does not work well
there was some kind of failure (perhaps from the program itself or from the fact that one of the cards number 2 fell off) after which everything went wrong, the found shares were not accepted, as a result, more than six hours of work wasted
https://ufile.io/avxz53eb log

Use other miners, nanominer is not worth. BZminer, teamredminer, srbminer, rigel, gminer all can handle mining 3 coins at the same time with a much higher hashrate and for sure a much better support.

yes, support seems to be useless, there are no answers to questions
and so I used other miners, but in a single version, apparently other options need to be considered

[FP91G]

New version of the miner
nanominer v3.8.3 Latest

Improved Kaspa performance on RDNA3 GPUs up to 10%.
Added AMD RX 7600 (and others based on gfx1102) support.
Fixed VerusCoin mining protocol issue.


https://github.com/nanopool/nanominer/releases/tag/v3.8.3
Check all links with first post from the developer

[lijingang]

Hi Nanominer, can you please help to add the ability to mine apepe on GPU? See please reply, thank you.

Hello everyone! I recently discovered a new interesting project (apepepow) that claims to be designed for the Monero (XMR) meme enthusiast community, developed by Monero developers. Is anyone interested in this project or has more information?I just read an article on a cryptocurrency blog about apepepow as an interesting meme coin for the monero community. I would like to know what people think about this project?
The following is the information of this project, can someone help me to look it up?

New minable pow coin: apepepow (apepe)
Monroe community meme coin, the first privacy meme coin, Monero developers, no pre-mining, no ICO, fair mining, let apepepow make pepe again
Algorithm: memehash
Web site: https://apepepow.com
Blocks the browser: https://scan.apepepow.com
Mining Pool:: https://ekapool.com/apepe/
bitcointalk:https://bitcointalk.org/index.php?topic=5455236.0
Discord: https://discord.gg/s5ZgwcnGzT
github:https://github.com/APEPEPOW/APEPEPOW
cpuminer-memehash:https://github.com/APEPEPOW/cpuminer-memehash

[nanominer.official]

Fixed DAG-based algorithms on AMD RX 7600 (gfx1102):
ethash family (ETHW, ETC, Ubiq, Zilliqa, Callisto, etc);
progpow family (Raven, FIRO);
Octopus (Conflux).
https://github.com/nanopool/nanominer/releases/tag/v3.8.4

[FP91G]

Lots of updates in the last 2 weeks

nanominer v3.8.11
Added Karlsenhash (Karlsen network) support on AMD GPUs.

https://github.com/nanopool/nanominer/releases/tag/v3.8.11

nanominer v3.8.10
Fixed Pyrin and Karlsen on Linux;
Fixed crash after 8 minutes on Linux;
Downgraded glibc version – nanominer works on Ubuntu 18 again.
https://github.com/nanopool/nanominer/releases/tag/v3.8.10

nanominer v3.8.9
Added Pyrinhash (Pyrin) support on Nvidia GPUs.
Hashrate:

4080 12.1 GH/s
3070ti 5.5 GH/s
3070 5.2 GH/s
1080ti 1.6 GH/s
1050 1.3 GH/s
CMP 70hx 715 MH/s
https://github.com/nanopool/nanominer/releases/tag/v3.8.9


Check all links with first post from the developer

[FP91G]

nanominer v3.10.0
Supported Nvidia RTX 50xx.
Fixed dual Zilliqa + some coins on f2pool and k1pool.
Fixed autoupdate.
Removed Alephium.
Now we publish checksums not only of the whole archives, but also of the nanominer executable files.

Intel Battlemage (Intel Arc Bxxx) is automatically supported as it is, including past versions.

https://github.com/nanopool/nanominer/releases/tag/v3.10.0

Check all links with first post from the developer