S19 Water cooling kit

[fullmetalpacket]

Hi all,

Anyone has experience with S19 water cooling kits? If the goal is to reduce noise, is it worth it?

Thanks!

[seek3r]

Installing a water cooling kit can greatly reduce the noise, prolong the life of the chip and additional to that it can improve the miner's performance.
The noise is reduced because you dont need these high-speed fans, which are required for air cooling, any longer.

As I mentioned above: By using water cooling, the temperature will drop significantly which also has a positive influence on the power consumption of the hashboard.

Make sure that you choose the right kit if you are going to buy a kit. There are a few differences between the S19 models.

[fullmetalpacket]

Thanks for your reply! very helpful.

Noise will be reduced but what about the radiator fans? I guess they might be loud too?

[seek3r]

Thanks for your reply! very helpful.

Noise will be reduced but what about the radiator fans? I guess they might be loud too?

There will be some noise ofc. But its nothing compared to air-cooled systems. Some kits are designed to operate as silent as possible.
They also come with a fan speed controller which can be used to control the speed and so on. However, you should be careful if you don't know what you are doing - dont lose sight of the temperatures of the hasboards.