Obviously you are not following instructions. You need to change ipv4 settings to be on same subnet 192.168.1.x or 192.168.2.x
1. Connect your antminer directly to your computer ethernet port. Don't worry about internet connection yet.
2.Start Button >> Control Panel >> Network and Internet (View network status and tasks) >> Change adapter setting (Left side of the screen) >> Local Area Connection (Double Click) >> Internet Protocol Version 4 (TCP/IPv4) then Click on “Properties” >> Select Use the following IP address:
Please look at near the cooling fan on the AntMiner. You’ll find a white sticker with an IP address printed on it. (Example: 192.168.1.99)
Set your computer's IP address to the following:
IP Address: 192.168.1.254
Subnet: 255.255.255.0
Default Gateway: 192.168.1.1
3. Open a web browser and type the IP address printed on the sticker above the cooling fan on the AntMiner. (Example: 192.168.1.99)
A login page will appear on the web page and ask you for the username and the password. (Default Username: root Default Password: root)
After log into the control panel, please go to the Status Tab then “Miner Configuration” tab.
Here, please fill out your mining pool information.
Example: Pool 1
Pool1 worker: worker’s name from your mining pool account
Pool1 password: worker’s password from your mining pool account
If you have multiple pools you want to mine, you can add pool 2 and pool3
4. Click Network-->WAN and change the IP to something on your original subnet 192.168.2.98 (run ipconfig when connected to the internet to see what it is)
5. Connect Antminer to router and change your computers ipv4 settings back to what it was before then connect computer to router.
Next time follow the instructions people ask of you. We don't have a magic wand and just calm down.
These are the instructions from here that a changed a bit to reflect current antminers being shipped. Either way easy to follow and same logic:
https://bitcointalk.org/index.php?topic=344970.0