Cgminer 3.7.2 Last G-Blade not mining.

[Coffee.Cup]

I will try to keep this simple.

I am having an issue with Cgminer not using the last miner on the list. I checked all my power connections and have double checked my settings and everything is fine there. Cgminer will see the last miner and report back a good stable hash at 2.723Mhs. I have even gone as far as testing each miner individually and they all work, so this leads me to believe it is a problem with cgminer and not my g-blades.

I have been searching for a way to correct this issue for 5 days and have found none.




As you can see GSD 5 is reporting zero for everything. I am just completely at a loss. Thankyou for any help and to the person who can lead me to a solution I will be more than happy to tip some BTC your way.

One more interesting fact. If I unplug GSD 5, then restart cgminer. GSD 4 shows nothing for work.

[Coffee.Cup]

Bump

[v0n]

What gridseed-options have you tried so far in your config?  There should be newer (4.3.5) version of cgminer with blade support out there btw.

[Oldminer]

The way to find it will be to determine the issue will be to try another miner (eg cpuminer w/blade support) and see if you have the same issue. You could also try swapping around your power cables (assuming you are using more than 1 PSU) and see if the problem moves to another blade. Is it always the same blade that fails to accept shares? I've seen this issue occur using bfgminer but it randomly affects different blades.