ATX Power Supply (Shorting Ground to PS On)

[AJinNYC]

I'm pretty sure this is correct but I wanted to double check so I don't fry my PSU or any thing connected to it.

I have two cappers/jumpers, what ever you want to call them, to short the PS On pin to a Ground pin, but each connector is using a different pin for the ground connector.

I found this chart on pin-outs on a 24-pin ATX PSU:

http://pinouts.ru/Power/atx_v2_pinout.shtml

Both of the jumpers appear to be connecting pin 16 to either 18 or 15, which both are grounds.

So I should be good with either one correct?

[mavericklm]

It's correct, green with any black!

[philipma1957]

yes it should work.