Zeus settings

[mgibson38]

Hey there, I'm looking to solo mine some alts using a zeus x3 28-30MH/s miner. Just wondering if anybody can help me out by possibly posting settings that work well using thjis same setup. I can tweak once I see them, just a bit of a newb when it comes to the conf files. Any help would be appreciated. Thanks.

[mgibson38]

To expand, I'm currently getting appx 20 mh/s right now, using lower chip counts and frequency than my device is supposed to use. I am using a 1000w Corsair PSU, and although it's technically supposed to work, I'm thinking thats why it fails to utilize the hardware at its rated values. If I disconnect the two boards and utilize one side only, it powers up and I get 14-15 mh/s as I'm supposed to. Am I missing something? Or is my PSU just inadequate? If anybody knows a command I can throw in there that will make it use less power (or just work properly if that isn't the issue) that would be excellent. Thank you.

[mgibson38]

Well, as it turns out, when I checked the PSU to make sure I had everything seated right, I had used to the 12v2 slots rather than 12v1 ones to put the removable PCIE adapters in. Problem completely solved, I would remove it but maybe some other dumbass like myself will come across this in a google search and it might help them or something. Thanks for the views all.