it's old out dated I'm not even sure how well it works any more from zoomhash.
https://zoomhash.com/pages/raspberry-pi-software-updatemnera works great with that miner i had it running my TX6 two month ago i don't power up much any way ...
https://bitcointalk.org/index.php?topic=596620.0BFGMINER IS the best one to use now
https://bitcointalk.org/index.php?topic=877081.0OLD fork of CGMINER
https://github.com/siklon/cpuminer-gc3355I prefer BFG and minera and use it with my Alchemist with five working boards on a custom PI type.
all these will run on all most on any RPI all but the zoomhash one if might be to old for a rpi3 even after a full update, if you use a RPI 3 i would load it with Ubuntu Classic Server 16.04
https://ubuntu-pi-flavour-maker.org/download/ then either use BFG at the black screen with SSH or manually install minera if you install Ubuntu 16 , after you do a full update there is a small bug that stops it from running i found a fix for in the config.txt on any PC in the SD reader change:
to the line below then pop it back in the RPI 3 it should boot right up.unless they fixed it which they haven't, i reloaded my PI 3 a day ago had to replace the line again.
# set extended DT area
device_tree_address=0x2008000
device_tree_end=0x200ff00
and if you manually install minera you have to install it like this
sudo apt-get install -y lighttpd php7.0-cgi
sudo lighty-enable-mod fastcgi-php
sudo lighty-enable-mod fastcgi
sudo service lighttpd force-reload
sudo apt-get install -y redis-server git screen php7.0-cli php7.0-curl libblkmaker-0.1-dev
cd /var/www
sudo git clone https://github.com/michelem09/minera
cd /var/www/minera
sudo ./install_minera.sh
and change few lines in the
file to
from php5 before you use
or it may not install right ...