Hello,
First time poster long time lurker.
I have been mining for some time now with my pc using 2 gpu and everything worked fine so I decided to invest a bit and buy 4 other gpu as well as multiple riser (oh boy was I wrong to fix it would be a smooth upgrade)
Update + Configure bios ... OK
Install GPU + Riser ... OK
Install Windows 10 ... OK
6 GPU are shown and usable with the miner I choose (Claymore or EWBF) but if I use 5 or 6 GPU after 2 min the system reboot (
ONLY WHEN USING MINER)
If I use 4 GPU or less
EVERYTHING works fine.
My Conf :
MSI z170a sli plus
6x PNY GTX 1070 OC xlr8
Pentium G4400
SSD 120Go Sandisk
ax1200i corsair
6x riser pcie 1x to 16x
What I tried so far :
- Drivers update (368.81 or 382.53)
- Bios Update
- Changing BIOS Conf (PCI-E gen 1, 2 or 3), Enabling 4G on BIOS, Settings Windows 10 conf in Bios
- Changing outlet for Power Supply
- Changing bad riser (all ok now)
- Changing virtual memory
- Putting each GPU on a separate PSU cable
- Putting max 2 riser per PSU cable
But nothing works
![Huh](https://bitcointalk.org/Smileys/default/huh.gif)
Can anyone smarter than me gives me some input?