my claymore dual miner black screen disapears just after starting help

[speedyb]

i can mine ether just fine but when i added sia coin so i can dual mine i made new config files ect to include the sia coin wallet adress but when i go to execute the .bat file the black screen comes up like it is going to mind then disappears? what do i do

also was told dual mining takes alot more power so i was wondering since i have my memory edited for a 1750strap? also set gpu clock to 1100? any idea on what i need to do to mine?

[generalt]

put a line at the bottom of your .bat file:

pause

This will pause the screen so you can see the error that you are getting.

[speedyb]

i have amd cards and i believe looking at the logs the error im getting is Failed to get OverdriveN capabilities
i tried putting an underscore or line under the .bat but it did'nt do anything?

[xxcsu]

post you bat file , that way we might able to help you! ( mask your eth/sia addresses with xxxx or something like that

[speedyb]

it wont let me upload a file here so


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal xxxxxxxxxxxxxxxxxxxx -epsw x -dcoin sia -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx -dpsw x -ftime 10

is my bat

[xxcsu]

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -epool eth-us-west1.nanopool.org:9999 -ewal xxxxxxxxxxxxxxxxxxxx/username -epsw x -dpool stratum+tcp://sia-us-west1.nanopool.org:7777 -dwal xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/username -dcoin sia -dcri 15

Try this way

Also full system spec would be great , how many cards you have  , what kind of cards are u using , psu brand , max wattage
you dont need a config file , if your bat file looks like this

use this bat file , and disable everything else in your config file with "#" ( # should be the first character on each line ) in your config file

[jedigeiss]

or try to use the config file ( it makes changes a bit easier ). Did you OC the Cards ?

[speedyb]

the memory i did yes 850 evga rx580 x2

[speedyb]

ok i tried this and still seems tonot be working. is clayymore 9.7 if that helps any

[xxcsu]

did you disabled everything in the config file ?
did you reset any overclocking setting to default ?
if you used more than one software to overclock your card , i would suggest to uninstall the gpu driver , use DDU uninstaller

you should be good with 850 watts psu and 2x rx 580

[speedyb]

i reinstalled windows and it fixed it thanks