Bitcoin Forum
June 04, 2024, 05:32:33 PM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: Problems with an old HashFast Baby Jet setup  (Read 245 times)
mcsaba (OP)
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
September 21, 2017, 09:32:54 AM
Last edit: September 21, 2017, 09:47:50 AM by mcsaba
 #1

Hi, i have a HASHFast Golden Nonce 768 GH/sec 28nm ASIC, it should be able to do 768 double SHA256 per clock cycle. The setup has a raspberry p1 as a controller with minepeon. It stopped performing suddenly, like two years ago. The owner wants to use it, because he doesnt have to pay for consumption.

It used to run fine with only a --hfa-hash-clock 678 even 720 setting. Now it only works without errors with a value lower than -hfa-hash-clock 330

Tried it with the old MinePeon that it had, Version 0.2.4.3hf8 with cgminer3.9.0h2. Also tried the latest minepeon img it has the same problem, but on lower hash clock around 250.

So the hashfast restarts every 2 minutes and has ~40 Gh/s. Marked the restart event with red.

Code:
[minepeon@minepeon ~]$ /opt/minepeon/bin/cgminer -c /opt/minepeon/etc/miner.conf --hfa-hash-clock 678
 cgminer version 3.9.0h2 - Started: [2017-09-21 11:08:21]
--------------------------------------------------------------------------------
 (5s):4.721G (avg):29.34Gh/s | A:9344  R:0  HW:308  WU:348.6/m
 ST: 2  SS: 0  NB: 3  LW: 9852  GF: 0  RF: 0
 Connected to eu.stratum.slushpool.com diff 128 with stratum as user mcsaba.worker1
 Block: 5911a918...  Diff:1.1T  Started: [11:22:15]  Best share: 35.6K
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 HFA 10: 52C/.83V 70C/.83V 56C/.84V 49C/.84V 13.55G/64.74Gh/s | A: 768 R:0 HW: 13 WU:  831.8/m
--------------------------------------------------------------------------------

 [2017-09-21 11:26:07] Accepted 0a27968a Diff 6.45K/128 HFA 8
[color=red] [2017-09-21 11:27:45] HFA 8 NOTICE: WARNING: Host watchdog timeout
 [2017-09-21 11:27:46] HFA 8 HFGetHeader usb read err:(-99) LIBUSB_ERROR_OTHER
 [2017-09-21 11:27:46] HFA 8 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
 [2017-09-21 11:27:46] HFA 8: device disappeared, disabling
 [2017-09-21 11:27:46] HFA 8 failure, disabling!
 [2017-09-21 11:27:46] HFA 8: hfa_send_frame: USB Send error, ret -4 amount 0 vs. tx_length 8
 [2017-09-21 11:27:56] Hotplug: Hashfast added HFA 9[/color]
 [2017-09-21 11:27:57] Accepted 013c0e32 Diff 207/128 HFA 9
 [2017-09-21 11:27:57] Accepted a3af0d13 Diff 400/128 HFA 9
 [2017-09-21 11:27:59] Accepted e8d70b69 Diff 281/128 HFA 9
 [2017-09-21 11:28:00] Accepted 01bdd320 Diff 147/128 HFA 9
 [2017-09-21 11:28:02] Accepted 01357790 Diff 212/128 HFA 9
[color=red] [2017-09-21 11:29:44] HFA 9 NOTICE: WARNING: Host watchdog timeout
 [2017-09-21 11:29:46] HFA 9 HFGetHeader usb read err:(-99) LIBUSB_ERROR_OTHER
 [2017-09-21 11:29:46] HFA 9 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
 [2017-09-21 11:29:46] HFA 9: device disappeared, disabling
 [2017-09-21 11:29:46] HFA 9 failure, disabling!
 [2017-09-21 11:29:46] HFA 9: hfa_send_frame: USB Send error, ret -4 amount 0 vs. tx_length 8
 [2017-09-21 11:29:53] Hotplug: Hashfast added HFA 10[/color]
 [2017-09-21 11:29:54] Accepted 010c4c11 Diff 244/128 HFA 10
 [2017-09-21 11:29:54] Accepted e613c698 Diff 285/128 HFA 10
 [2017-09-21 11:29:54] Accepted a6e4b677 Diff 393/128 HFA 10
 [2017-09-21 11:29:56] Accepted 32b1bf2f Diff 1.29K/128 HFA 10
 [2017-09-21 11:29:58] Accepted 01d7f4a2 Diff 139/128 HFA 10
 [2017-09-21 11:30:00] Accepted 01d55c9d Diff 140/128 HFA 10

And sometimes all it does just gives this error messages until it restarts

Code:
[minepeon@minepeon ~]$ /opt/minepeon/bin/cgminer -c /opt/minepeon/etc/miner.conf --hfa-hash-clock 678
 cgminer version 3.9.0h2 - Started: [2017-09-21 11:08:21]
--------------------------------------------------------------------------------
 (5s):544.4K (avg):27.90Gh/s | A:11904  R:0  HW:1688  WU:349.5/m
 ST: 2  SS: 0  NB: 6  LW: 12547  GF: 0  RF: 0
 Connected to eu.stratum.slushpool.com diff 128 with stratum as user mcsaba.worker1
 Block: 97f81fde...  Diff:1.1T  Started: [11:37:20]  Best share: 35.6K
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 HFA 13: 51C/.83V 69C/.83V 55C/.84V 48C/.84V 4.044M/24.33Gh/s | A: 384 R:0 HW:604 WU:  156.1/m
--------------------------------------------------------------------------------

 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403000
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403100
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403200
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403300
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403400
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403500
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403600
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403700
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403800
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 403900
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404000
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404100
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404200
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404300
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404400
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404500
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404600
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404700
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404800
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 404900
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 405000
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 405100
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 405200
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 405300
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 405400
 [2017-09-21 11:38:03] HFA 13 NOTICE: Hash Core Error: Still emitting hashes: die 1 core 72, count: 405500

Here is the debug output for the restart event

Code:
 [2017-09-21 12:09:19] HFA 0: die  0: OP_DIE_STATUS Die temp 51.23C vdd's 0.83 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:19] HFA 0: die  1: OP_DIE_STATUS Die temp 69.22C vdd's 0.83 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:19] USB: HFA0 read1 buffering 48 extra bytes
 [2017-09-21 12:09:19] HFA 0: die  2: OP_DIE_STATUS Die temp 55.10C vdd's 0.84 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:19] HFA 0: die  3: OP_DIE_STATUS Die temp 48.30C vdd's 0.84 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:20] USB: HFA0 read1 buffering 128 extra bytes
 [2017-09-21 12:09:20] USB: HFA0 read1 buffering 112 extra bytes
 [2017-09-21 12:09:20] HFA 0: OP_GWQ_STATUS, device_head 1688 tail  928 my tail  928 shed   0 inflight  760
 [2017-09-21 12:09:20] USB: HFA0 read1 buffering 104 extra bytes
 [2017-09-21 12:09:20] USB: HFA0 read1 buffering 56 extra bytes
 [2017-09-21 12:09:20] HFA 0: die  0: OP_DIE_STATUS Die temp 51.12C vdd's 0.83 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:20] HFA 0: die  1: OP_DIE_STATUS Die temp 69.16C vdd's 0.83 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:20] USB: HFA0 read1 buffering 48 extra bytes
 [2017-09-21 12:09:20] HFA 0: die  2: OP_DIE_STATUS Die temp 54.98C vdd's 0.84 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:20] HFA 0: die  3: OP_DIE_STATUS Die temp 48.19C vdd's 0.84 0.00 0.00 0.00 0.00 0.00
 [2017-09-21 12:09:20] HFA0: HFGetHeader (amt=0 err=-9 ern=25)
 [2017-09-21 12:09:20] HFA0: libusb pipe error, trying to clear
 [2017-09-21 12:09:20] HFA0: libusb pipe error not cleared
 [2017-09-21 12:09:20] HFA0: libusb pipe error, trying to clear
 [2017-09-21 12:09:20] HFA0: libusb pipe error not cleared
 [2017-09-21 12:09:20] HFA0: libusb pipe error, trying to clear
 [2017-09-21 12:09:20] HFA0: libusb pipe error not cleared
 [2017-09-21 12:09:20] HFA0: libusb pipe error, trying to clear
 [2017-09-21 12:09:20] HFA0: libusb pipe error not cleared
 [2017-09-21 12:09:20] HFA0: libusb pipe error, trying to clear
 [2017-09-21 12:09:20] HFA0: libusb pipe error not cleared
 [2017-09-21 12:09:20] HFA 0 HFGetHeader usb read err:(-99) LIBUSB_ERROR_OTHER
 [2017-09-21 12:09:20] HFA 0 attempted reset got err:(-5) LIBUSB_ERROR_NOT_FOUND
 [2017-09-21 12:09:20] USB release HFA0
 [2017-09-21 12:09:20] USB uninit HFA0
 [2017-09-21 12:09:20] USB free HFA
 [2017-09-21 12:09:20] USB unlock Hashfast 1-31
 [2017-09-21 12:09:20] RES: Hashfast (1:31) lock=0
 [2017-09-21 12:09:20] USB res unlock Hashfast 1-31
 [2017-09-21 12:09:20] HFA 0: Shutting down read thread
 [2017-09-21 12:09:20] HFA 0: device disappeared, disabling
 [2017-09-21 12:09:20] HFA 0 failure, disabling!
 [2017-09-21 12:09:20] HFA 0: Sending OP_USB_SHUTDOWN frame
 [2017-09-21 12:09:20] HFA 0: hfa_send_frame: USB Send error, ret -4 amount 0 vs. tx_length 8
 [2017-09-21 12:09:21] USB scan devices: checking for HFA devices
 [2017-09-21 12:09:22] HFA looking for and found HFA 297c:0001
 [2017-09-21 12:09:22] USB lock Hashfast 1-32
 [2017-09-21 12:09:22] RES: Hashfast (1:32) lock=1
 [2017-09-21 12:09:22] USB res lock Hashfast 1-32
 [2017-09-21 12:09:22] RES: Hashfast (1:32) lock ok=1
 [2017-09-21 12:09:22] USB init, kernel attached ... - HFA device 1:32-i1
 [2017-09-21 12:09:22] USB init, kernel detached ifinfo 0 interface 1 successfully - HFA device 1:32-i1
 [2017-09-21 12:09:22] USB init - HFA device 1:32-i1 usbver=0200 prod='M1 Module' manuf='HashFast LLC' serial='1614460f6be8df5502f66ea5f6001f79'
 [2017-09-21 12:09:23] Work stale due to stratum job_id mismatch
 [2017-09-21 12:09:23] Discarded work
 [2017-09-21 12:09:23] Work stale due to stratum job_id mismatch
 [2017-09-21 12:09:23] Discarded work
 [2017-09-21 12:09:23] Selecting pool 0 for work
 [2017-09-21 12:09:23] Generated stratum merkle 233d7340b1156fbe8d35b655298626705a6d18cfdb7c48795971db073eea1549
 [2017-09-21 12:09:23] Generated stratum header 20000000822eb7f2a3ecc527787d513bf335a091d67d867d00af7b390000000000000000233d7340b1156fbe8d35b655298626705a6d$
 [2017-09-21 12:09:23] Discarded 2 stales that didn't match current hash
 [2017-09-21 12:09:23] Work job_id 43cd4 nonce2 1018 ntime 59c381c1
 [2017-09-21 12:09:23] Generated target 00000000000000000000000000000000000000000000000000feff0100000000
 [2017-09-21 12:09:23] Generated stratum work
 [2017-09-21 12:09:23] Pushing work from pool 0 to hash queue
 [2017-09-21 12:09:23] Work update message received
 [2017-09-21 12:09:23] Selecting pool 0 for work
 [2017-09-21 12:09:23] Generated stratum merkle cf5fca0282007ccbc716aec89be3968aff89ba6fb9b7e8474510b12b6f94b8c6
 [2017-09-21 12:09:23] Generated stratum header 20000000822eb7f2a3ecc527787d513bf335a091d67d867d00af7b390000000000000000cf5fca0282007ccbc716aec89be3968aff89$
 [2017-09-21 12:09:23] Work job_id 43cd4 nonce2 1019 ntime 59c381c1
 [2017-09-21 12:09:23] (5s):3.336M (avg):48.66Gh/s | A:3565  R:0  HW:67  WU:786.6/m
 [2017-09-21 12:09:23] Generated target 00000000000000000000000000000000000000000000000000feff0100000000
 [2017-09-21 12:09:23] Generated stratum work
 [2017-09-21 12:09:23] Pushing work from pool 0 to hash queue
 [2017-09-21 12:09:24] HFA0: HFClearRead (amt=0 err=-7 ern=25)
 [2017-09-21 12:09:24] HFA0: Sending OP_USB_INIT with GWQ protocol specified
 [2017-09-21 12:09:24] HFA0: HFGetHeader (amt=0 err=-7 ern=25)
 [2017-09-21 12:09:25] HFA0: HFGetHeader (amt=0 err=-7 ern=25)
 [2017-09-21 12:09:25] HFA0: HFGetHeader (amt=0 err=-7 ern=25)
 [2017-09-21 12:09:26] HFA0: HFGetHeader (amt=0 err=-7 ern=25)
 [2017-09-21 12:09:26] USB: HFA0 read1 buffering 80 extra bytes
 [2017-09-21 12:09:26] HFA 0: Good reply to OP_USB_INIT
 [2017-09-21 12:09:26] HFA 0: OP_USB_INIT: 4 die in chain, 96 cores, device_type 1, refclk 125 Mhz
 [2017-09-21 12:09:26] USB: HFA0 read1 buffering 64 extra bytes
 [2017-09-21 12:09:26] HFA 0:      firmware_rev:    0.5
 [2017-09-21 12:09:26] USB: HFA0 read1 buffering 64 extra bytes
 [2017-09-21 12:09:26] HFA 0:      firmware_rev:    0.5
 [2017-09-21 12:09:26] HFA 0:      hardware_rev:    1.1
 [2017-09-21 12:09:26] HFA 0:      serial number:   -167764103
 [2017-09-21 12:09:26] HFA 0:      hash clockrate:  671 Mhz
 [2017-09-21 12:09:26] HFA 0:      inflight_target: 760
 [2017-09-21 12:09:26] HFA 0:      sequence_modulus: 2048
 [2017-09-21 12:09:26] USB: HFA0 read1 buffering 48 extra bytes
 [2017-09-21 12:09:26] HFA looking for HFA 297c:0001 but found 0424:ec00 instead
 [2017-09-21 12:09:26] HFA looking for HFA 297c:0001 but found 0424:9512 instead
 [2017-09-21 12:09:26] HFA looking for HFA 297c:0001 but found 1d6b:0002 instead
 [2017-09-21 12:09:26] Pushing sem post to thread 1
 [2017-09-21 12:09:26] Hotplug: Hashfast added HFA 1
 [2017-09-21 12:09:26] Waiting on sem in miner thread
 [2017-09-21 12:09:26] Unable to set thread to high priority
 [2017-09-21 12:09:26] HFA 1: Sending 760 new jobs
 [2017-09-21 12:09:26] Popping work from get queue to get work
 [2017-09-21 12:09:26] Selecting pool 0 for work
 [2017-09-21 12:09:26] Generated stratum merkle 2f7c181d02ff9b5774143f88470d0685f5661b76ba53481fe3ad316f3c29d762
 [2017-09-21 12:09:26] Generated stratum header 20000000822eb7f2a3ecc527787d513bf335a091d67d867d00af7b3900000000000000002f7c181d02ff9b5774143f88470d0685f566$
 [2017-09-21 12:09:26] Got work from get queue to get work for thread 1
 [2017-09-21 12:09:26] Work job_id 43cd4 nonce2 1020 ntime 59c381c1
 [2017-09-21 12:09:26] HFA 1: Sending OP_HASH frame
 [2017-09-21 12:09:26] Generated target 00000000000000000000000000000000000000000000000000feff0100000000
 [2017-09-21 12:09:26] Generated stratum work
 [2017-09-21 12:09:26] HFA 1: OP_HASH sequence 1 search_difficulty 39 work_difficulty 128
 [2017-09-21 12:09:26] Popping work from get queue to get work
 [2017-09-21 12:09:26] Pushing work from pool 0 to hash queue
 [2017-09-21 12:09:26] Got work from get queue to get work for thread 1
 [2017-09-21 12:09:26] HFA 1: Sending OP_HASH frame
 [2017-09-21 12:09:26] Selecting pool 0 for work
 [2017-09-21 12:09:26] Generated stratum merkle e33305edd79c486310b52cb7e5db4a469d945cc16dba325c9a1650850ef4946a
 [2017-09-21 12:09:26] HFA 1: OP_HASH sequence 2 search_difficulty 39 work_difficulty 128
 [2017-09-21 12:09:26] Generated stratum header 20000000822eb7f2a3ecc527787d513bf335a091d67d867d00af7b390000000000000000e33305edd79c486310b52cb7e5db4a469d94$
 [2017-09-21 12:09:26] Popping work from get queue to get work
 [2017-09-21 12:09:26] Work job_id 43cd4 nonce2 1021 ntime 59c381c1
 [2017-09-21 12:09:26] Got work from get queue to get work for thread 1
 [2017-09-21 12:09:26] Generated target 00000000000000000000000000000000000000000000000000feff0100000000
 [2017-09-21 12:09:26] HFA 1: Sending OP_HASH frame
 [2017-09-21 12:09:26] Generated stratum work
 [2017-09-21 12:09:26] Pushing work from pool 0 to hash queue

and this is when it works at 330, if I go higher it starts to have errors

Code:
[minepeon@minepeon ~]$ /opt/minepeon/bin/cgminer -c /opt/minepeon/etc/miner.conf --hfa-hash-clock 330

 cgminer version 3.9.0h2 - Started: [2017-09-21 12:25:28]
--------------------------------------------------------------------------------
 (5s):218.8G (avg):217.8Gh/s | A:11083  R:0  HW:6  WU:3586.4/m
 ST: 2  SS: 0  NB: 1  LW: 8372  GF: 0  RF: 0
 Connected to eu.stratum.slushpool.com diff 311 with stratum as user mcsaba.worker1
 Block: f5f1d092...  Diff:1.1T  Started: [12:25:28]  Best share: 50.3K
--------------------------------------------------------------------------------
 [P]ool management [S]ettings [D]isplay options [Q]uit
 HFA 0: 60C/.83V 80C/.83V 66C/.83V 57C/.83V 333.1G/231.4Gh/s | A:11083 R:0 HW:6 WU:3714.5/m
--------------------------------------------------------------------------------

 [2017-09-21 12:25:22] Started cgminer 3.9.0h2
 [2017-09-21 12:25:22] Loaded configuration file /opt/minepeon/etc/miner.conf
 [2017-09-21 12:25:26] Probing for an alive pool
 [2017-09-21 12:25:27] Pool 0 difficulty changed to 2048
 [2017-09-21 12:25:28] Network diff set to 1.1T
 [2017-09-21 12:25:33] API running in IP access mode on port 4028 (13)
 [2017-09-21 12:25:40] Accepted 014d8054 Diff 50.3K/2048 HFA 0
 [2017-09-21 12:25:50] Accepted 1e166bf5 Diff 2.18K/2048 HFA 0
 [2017-09-21 12:26:01] Accepted 0e166900 Diff 4.65K/2048 HFA 0
 [2017-09-21 12:26:07] Pool 0 difficulty changed to 846
 [2017-09-21 12:26:07] Stratum from pool 0 requested work restart
 [2017-09-21 12:26:20] Accepted 423e43b9 Diff 989/846 HFA 0
 [2017-09-21 12:26:29] Accepted 35d7ba3e Diff 1.22K/846 HFA 0
 [2017-09-21 12:26:38] Accepted 36d8a052 Diff 1.2K/846 HFA 0
 [2017-09-21 12:27:03] Accepted 32498aeb Diff 1.3K/846 HFA 0
 [2017-09-21 12:27:08] Pool 0 difficulty changed to 311
 [2017-09-21 12:27:08] Stratum from pool 0 requested work restart
 [2017-09-21 12:27:19] Accepted b460144c Diff 363/311 HFA 0
 [2017-09-21 12:27:25] Accepted 3c61ba28 Diff 1.08K/311 HFA 0
 [2017-09-21 12:27:26] Accepted ba09266d Diff 352/311 HFA 0
 [2017-09-21 12:27:27] Accepted 7055223d Diff 583/311 HFA 0
 [2017-09-21 12:27:27] Accepted 44593fd0 Diff 959/311 HFA 0


Is it possible, that the power source can't give enough power and the hashfast card restarts when it doesn't receive enough power? It uses a 3 year old 750W source.
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!