|
October 02, 2017, 01:19:56 PM |
|
Hi, pretty new to mining and I have been trying to setup a few ascii mining rigs. I have a t9, s9, l3+ and d3. My understanding is that the delta DPS-2400AB B is a redundant power supply. I do not know much about power supplies, but I assume that is why it has 2 sides, with separate plugs? As the power supply makes 2400w, I assume I can plug a s9 with a l3 into the same supply.
1400w + 800w = 2200w
The issue is the breakout boards I recieved are 8 plugs each, and I require 19. I can buy a 16 plug board and replace one of the boards which would fix this issue, but I am jsut wondering if anyone know if this power supply is independantly fused on each side? IF is separate out the hash boards to the different side that best split I can get is:
2 s9 boards + 1 l3= 1133w on ones side 1 s9 hashboard + 3 l3 hashboards + both controllers = 1066w
This would keep each side below 1200w, but I am not sure that is important or not. I would prefer to put each miner on a separate board, that why I could power down one, if there was a problem with the boards the whole miner would power down.
Anyone have any experience with this?
|