Low hashrate for just ETH, other ethas coins are mining at correct rate

[sickrefman]

i have a 5 rx580 rig that is only mining eth at 100MH/s while other ethash coins mine at full capacity of 148 MH/s

I have tried multiple different pools and miners and get the same results.

Anyone else experience this?

[xxcsu]

i have a 5 rx580 rig that is only mining eth at 100MH/s while other ethash coins mine at full capacity of 148 MH/s

I have tried multiple different pools and miners and get the same results.

Anyone else experience this?

You card is probably way overclocked for ETH mining , try to underclock/undervolt your gpu , undervolt your memory , play with power limit ...
If you are using claymores miner , try to set -dcri value in the bat file , start from 30 and keep going lower ... it might help
Also are you dual mining anything with ETH ?

[sickrefman]

You card is probably way overclocked for ETH mining , try to underclock/undervolt your gpu , undervolt your memory , play with power limit ...

Currently all cards using modded bios, 4 cards clocked at 1200 core and 2000-2150 for memory, no undervolting. one card clocked at 1400 because it had shity eth has rates at without 1400 clock.
I was able to get 29-30mh on eth on all the cards when i tested after bios mod, this was over the weekend when tested individually.

If you are using claymores miner , try to set -dcri value in the bat file , start from 30 and keep going lower ... it might help

stopped dual mining completely to see if that helped. eth solo wouldn't budge over 101mh
also tried multiple pools on claymore and ethminer, 101 MH cap.

Also are you dual mining anything with ETH ?

siacoin, but i can dual mine other ethash coins at full 148 MH with dual mining sia. ETH is the only problem.

I don't understand why the ethash rates are so low just for eth

thanks for the response.

[xxcsu]

what tune software are you using ?
did you tried mining w claymores miner and add -dcri to your bat file ? and decrease / incrase the -dcri value ?
looks ilke you cards when you mining eth,  hashing on stock speed , without any tune applied

in my case, any coin im mining need a different fine tune for each cards for the max performance

[sickrefman]

what tune software are you using ?

i modded the bios to the clocks I want, i turn on MSI afterburner to get the fans to turn up thou. the bios mods for fans at 80-100% don't seem to work so i need to use afterburner to get them on. but the clocks show as i set them, so not sure hwy eth is giving me shit.

[Olatunjex]

I am not really into mining but i believe checking envion is trying to make mining easy for miners and they are currently at their ico level and ending soon.