tinygekkoscienceminer (OP)
Newbie
Offline
Activity: 7
Merit: 0
|
|
February 28, 2018, 02:26:07 PM Last edit: February 28, 2018, 07:39:36 PM by frodocooper |
|
Hi My Antminer S5 is not working since morning https://ibb.co/eLQskxShowing Chain #1: as -------- -----x-- -------- -----x [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014 [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] On node 0 totalpages: 130816 [ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000 [ 0.000000] Normal zone: 1024 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 129792 pages, LIFO batch:31 [ 0.000000] AM335X ES1.0 (neon ) [ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b36000 s9408 r8192 d15168 u32768 [ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792 [ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 511MB = 511MB total [ 0.000000] Memory: 495540k/495540k available, 28748k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB) [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB) [ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB) [ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB) [ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB) [ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts [ 0.000000] Total of 128 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000355] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968) [ 0.015412] pid_max: default: 32768 minimum: 301 [ 0.015656] Security Framework initialized [ 0.015751] Mount-cache hash table entries: 512 [ 0.025683] Initializing cgroup subsys cpuacct [ 0.025716] Initializing cgroup subsys memory [ 0.025780] Initializing cgroup subsys blkio [ 0.025924] CPU: Testing write buffer coherency: ok [ 0.026469] CPU0: thread -1, cpu 0, socket -1, mpidr 0 [ 0.026548] Setting up static identity map for 0x8038c820 - 0x8038c86c [ 0.027945] Brought up 1 CPUs [ 0.027969] SMP: Total of 1 processors activated (545.07 BogoMIPS). [ 0.029263] devtmpfs: initialized [ 0.093774] pinctrl core: initialized pinctrl subsystem [ 0.093988] rstctl core: initialized rstctl subsystem [ 0.094484] regulator-dummy: no parameters [ 0.094994] NET: Registered protocol family 16 [ 0.095757] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.105548] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 [ 0.106328] platform 49000000.edma: alias fck already exists [ 0.106360] platform 49000000.edma: alias fck already exists [ 0.106388] platform 49000000.edma: alias fck already exists [ 0.107590] gpiochip_add: registered GPIOs 0 to 31 on device: gpio [ 0.107775] OMAP GPIO hardware version 0.1 [ 0.109114] gpiochip_add: registered GPIOs 32 to 63 on device: gpio [ 0.110441] gpiochip_add: registered GPIOs 64 to 95 on device: gpio [ 0.111907] gpiochip_add: registered GPIOs 96 to 127 on device: gpio [ 0.112443] of_get_named_gpio_flags exited with status 52 [ 0.112474] gpio-rctrl rstctl.3: loaded OK [ 0.117290] omap-gpmc 50000000.gpmc: GPMC revision 6.0 [ 0.120549] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.122772] cpsw.0: No hwaddr in dt. Using d0:5f:b8:e2:4f:73 from efuse [ 0.122854] cpsw.1: No hwaddr in dt. Using d0:5f:b8:e2:4f:75 from efuse [ 0.138307] bio: create slab <bio-0> at 0 [ 0.150444] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver [ 0.150681] of_get_named_gpio_flags: can't parse gpios property [ 0.150895] vmmcsd_fixed: 3300 mV [ 0.153938] SCSI subsystem initialized [ 0.154430] usbcore: registered new interface driver usbfs [ 0.154561] usbcore: registered new interface driver hub [ 0.154840] usbcore: registered new device driver usb [ 0.156910] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.158427] input: tps65217_pwr_but as /devices/ocp.2/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 0.160176] DCDC1: at 1500 mV [ 0.161324] vdd_mpu: 925 <--> 1325 mV at 1325 mV [ 0.162473] vdd_core: 925 <--> 1150 mV at 1100 mV [ 0.163574] LDO1: at 1800 mV [ 0.164722] LDO2: at 3300 mV [ 0.166705] LDO3: 1800 mV [ 0.167817] LDO4: at 3300 mV [ 0.168808] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 0.169514] omap_i2c 44e0b000.i2c: unable to select pin group [ 0.170316] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz [ 0.172643] omap_i2c 4819c000.i2c: unable to select pin group [ 0.172888] media: Linux media interface: v0.10 [ 0.172991] Linux video capture interface: v2.00 [ 0.173114] pps_core: LinuxPPS API ver. 1 registered [ 0.173130] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.173999] Advanced Linux Sound Architecture Driver Initialized. [ 0.175172] Switching to clocksource gp_timer [ 0.193407] NET: Registered protocol family 2 [ 0.194423] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.194566] TCP bind hash table entries: 4096 (order: 4, 81920 bytes) [ 0.194728] TCP: Hash tables configured (established 4096 bind 4096) [ 0.194891] TCP: reno registered [ 0.194923] UDP hash table entries: 256 (order: 1, 12288 bytes) [ 0.194969] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes) [ 0.195391] NET: Registered protocol family 1 [ 0.195955] RPC: Registered named UNIX socket transport module. [ 0.195977] RPC: Registered udp transport module. [ 0.195991] RPC: Registered tcp transport module. [ 0.196005] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.196374] Trying to unpack rootfs image as initramfs... [ 2.124559] Freeing initrd memory: 14748K [ 2.125230] CPU PMU: probing PMU on CPU 0 [ 2.125261] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available [ 2.125787] omap2_mbox_probe: platform not supported [ 2.129733] VFS: Disk quotas dquot_6.5.2 [ 2.129971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.131335] NFS: Registering the id_resolver key type [ 2.131495] Key type id_resolver registered [ 2.131512] Key type id_legacy registered [ 2.131580] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 2.132065] msgmni has been set to 996 [ 2.134917] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [ 2.134942] io scheduler noop registered [ 2.134958] io scheduler deadline registered [ 2.135011] io scheduler cfq registered (default) [ 2.136810] tps65217-bl tps65217-bl: no platform data provided [ 2.136850] tps65217-bl: probe of tps65217-bl failed with error -22 [ 2.137768] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.140540] omap_uart 44e09000.serial: did not get pins for uart0 error: -19 [ 2.140824] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0 [ 2.858108] console [ttyO0] enabled [ 2.863006] [drm] Initialized drm 1.1.0 20060810 [ 2.881619] brd: module loaded [ 2.891848] loop: module loaded [ 2.895307] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.902600] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.909878] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.917155] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.924423] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 2.962406] bone-capemgr bone_capemgr.8: bone: scan failed (1 time) [ 3.501469] bone-capemgr bone_capemgr.8: bone: scan failed (2 time) [ 4.040525] bone-capemgr bone_capemgr.8: bone: scan failed (3 time) [ 4.579586] bone-capemgr bone_capemgr.8: bone: scan failed (4 time) [ 5.118650] bone-capemgr bone_capemgr.8: bone: scan failed (5 time) [ 5.657711] bone-capemgr bone_capemgr.8: bone: scan failed (6 time) [ 6.196777] bone-capemgr bone_capemgr.8: bone: scan failed (7 time) [ 6.735836] bone-capemgr bone_capemgr.8: bone: scan failed (8 time) [ 7.274900] bone-capemgr bone_capemgr.8: bone: scan failed (9 time) [ 7.813961] bone-capemgr bone_capemgr.8: bone: scan failed (10 time) [ 8.321945] bone-capemgr bone_capemgr.8: Failed to scan baseboard eeprom [ 8.329014] bone-capemgr: probe of bone_capemgr.8 failed with error -110 [ 8.338569] nand_get_flash_type: 2c,da against 2c,da [ 8.344094] ONFI param page 0 valid [ 8.347767] ONFI flash detected [ 8.351086] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64 [ 8.362997] omap2-nand: detected x8 NAND flash [ 8.367660] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme [ 8.373262] omap2-nand: using custom ecc layout [ 8.378100] 10 ofpart partitions found on MTD device omap2-nand.0 [ 8.384490] Creating 10 MTD partitions on "omap2-nand.0": [ 8.390161] 0x000000000000-0x000000020000 : "spl" [ 8.397033] 0x000000020000-0x000000040000 : "spl_backup1" [ 8.404479] 0x000000040000-0x000000060000 : "spl_backup2" [ 8.411885] 0x000000060000-0x000000080000 : "spl_backup3" [ 8.419167] 0x000000080000-0x000000240000 : "u-boot" [ 8.427433] 0x000000240000-0x000000260000 : "bootenv" [ 8.434400] 0x000000260000-0x000000280000 : "fdt" [ 8.441028] 0x000000280000-0x000000780000 : "kernel" [ 8.452054] 0x000000800000-0x000001c00000 : "root" [ 8.475463] 0x000001c00000-0x000003000000 : "config" [ 8.499227] OneNAND driver initializing [ 8.506720] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17 [ 8.514008] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16 [ 8.524255] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43 [ 8.531536] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42 [ 8.540807] usbcore: registered new interface driver asix [ 8.546653] usbcore: registered new interface driver cdc_ether [ 8.552932] usbcore: registered new interface driver smsc95xx [ 8.559053] usbcore: registered new interface driver net1080 [ 8.565076] usbcore: registered new interface driver cdc_subset [ 8.571383] usbcore: registered new interface driver zaurus [ 8.577367] usbcore: registered new interface driver cdc_ncm [ 8.584119] usbcore: registered new interface driver cdc_acm [ 8.590075] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 8.598453] Initializing USB Mass Storage driver... [ 8.603679] usbcore: registered new interface driver usb-storage [ 8.609978] USB Mass Storage support registered. [ 8.615003] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 8.621666] musb-hdrc musb-hdrc.0.auto: pdev->id = 0 [ 8.626903] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 8.635667] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 8.635689] musb-hdrc: MHDRC RTL version 2.0 [ 8.635703] musb-hdrc: setup fifo_mode 4 [ 8.635733] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 8.635882] musb-hdrc musb-hdrc.0.auto: *** mode=3 [ 8.640925] musb-hdrc musb-hdrc.0.auto: *** power=250 [ 8.646890] musb-hdrc musb-hdrc.1.auto: pdev->id = 1 [ 8.652138] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK [ 8.660901] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn) [ 8.660921] musb-hdrc: MHDRC RTL version 2.0 [ 8.660935] musb-hdrc: setup fifo_mode 4 [ 8.660958] musb-hdrc: 28/31 max ep, 16384/16384 memory [ 8.661077] musb-hdrc musb-hdrc.1.auto: *** mode=1 [ 8.666118] musb-hdrc musb-hdrc.1.auto: *** power=250 [ 8.671425] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver [ 8.677811] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1 [ 8.686047] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup [ 8.686159] usb usb1: default language 0x0409 [ 8.686217] usb usb1: udev 1, busnum 1, minor = 0 [ 8.686241] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.693369] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.700939] usb usb1: Product: MUSB HDRC host driver [ 8.706152] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd [ 8.711819] usb usb1: SerialNumber: musb-hdrc.1.auto [ 8.717684] usb usb1: usb_probe_device [ 8.717711] usb usb1: configuration #1 chosen from 1 choice [ 8.717776] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 8.717987] hub 1-0:1.0: usb_probe_interface [ 8.718010] hub 1-0:1.0: usb_probe_interface - got id [ 8.718036] hub 1-0:1.0: USB hub found [ 8.722072] hub 1-0:1.0: 1 port detected [ 8.726242] hub 1-0:1.0: standalone hub [ 8.726262] hub 1-0:1.0: individual port power switching [ 8.726281] hub 1-0:1.0: no over-current protection [ 8.726299] hub 1-0:1.0: Single TT [ 8.726320] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 8.726340] hub 1-0:1.0: power on to power good time: 10ms [ 8.726384] hub 1-0:1.0: local power source is good [ 8.726489] hub 1-0:1.0: enabling power on all ports [ 8.727534] mousedev: PS/2 mouse device common for all mice [ 8.735904] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 8.743382] 44e3e000.rtc: already running [ 8.747874] i2c /dev entries driver [ 8.753243] pps_ldisc: PPS line discipline registered [ 8.758728] Driver for 1-wire Dallas network protocol. [ 8.766015] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec [ 8.773583] cpuidle: using governor ladder [ 8.777904] cpuidle: using governor menu [ 8.782455] of_get_named_gpio_flags exited with status 6 [ 8.782475] of_get_named_gpio_flags: can't parse gpios property [ 8.782491] of_get_named_gpio_flags: can't parse gpios property [ 8.782529] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed [ 8.789748] omap_hsmmc mmc.4: Failed to get rstctl; not using any [ 8.796577] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25 [ 8.803780] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24 [ 8.811135] mmc.4 supply vmmc_aux not found, using dummy regulator [ 8.818101] omap_hsmmc mmc.4: pins are not configured from the driver [ 8.827758] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 8.851605] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.7 [ 8.863300] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.7) status -22 [ 8.870603] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single [ 8.879631] leds-gpio gpio-leds.7: pins are not configured from the driver [ 8.886864] of_get_named_gpio_flags exited with status 53 [ 8.886889] of_get_named_gpio_flags exited with status 54 [ 8.886910] of_get_named_gpio_flags exited with status 55 [ 8.886931] of_get_named_gpio_flags exited with status 56 [ 8.886965] of_get_named_gpio_flags exited with status 53 [ 8.887251] of_get_named_gpio_flags exited with status 54 [ 8.887467] of_get_named_gpio_flags exited with status 55 [ 8.887656] of_get_named_gpio_flags exited with status 56 [ 8.888262] ledtrig-cpu: registered to indicate activity on CPUs [ 8.894970] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36 [ 8.902161] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 [ 8.910280] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 [ 8.916573] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5 [ 8.923769] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6 [ 8.936189] usbcore: registered new interface driver usbhid [ 8.942104] usbhid: USB HID core driver [ 8.949071] TCP: cubic registered [ 8.952606] Initializing XFRM netlink socket [ 8.957163] NET: Registered protocol family 17 [ 8.961981] NET: Registered protocol family 15 [ 8.966820] Key type dns_resolver registered [ 8.971465] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 [ 8.979575] ThumbEE CPU extension supported. [ 8.984178] Registering SWP/SWPB emulation handler [ 8.990209] registered taskstats version 1 [ 9.046406] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 9.052817] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 9.067220] libphy: 4a101000.mdio: probed [ 9.071522] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 [ 9.081398] Detected MACID = d0:5f:b8:e2:4f:73 [ 9.086091] cpsw 4a100000.ethernet: NAPI disabled [ 9.092742] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 9.109123] ALSA device list: [ 9.112254] No soundcards found. [ 9.116425] Freeing init memory: 264K [ 9.120350] Failed to execute /init [ 9.382725] compile Jul 24 2015--13:54:18 [ 9.387015] CM_PER_SPI1_CLKCTRL 0x10002 [ 9.391052] spi_vaddr 0xfa1a0000 [ 9.394430] version 0x40300a0b [ 9.397620] OMAP2_MCSPI_SYSSTATUS 0x1 [ 9.401451] OMAP2_MCSPI_MODULCTRL 0x1 [ 9.405285] OMAP2_MCSPI_CHCONF0 0x180103c5 [ 9.409683] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0} [ 9.416820] hash ok [ 9.419046] hashtest OK [ 9.425607] bitmain-asic: success to register device [ 9.441224] Detect hardware version = 4 [ 9.445315] fix hardware version [ 9.448699] hardware_version = 0x4 [ 9.452367] S5 ctrl board test V1.1 [ 9.456108] pwm_percent{20} [ 9.459216] bitmain_asic_open ok [ 10.818333] stop send work to all chain [ 10.823548] Sending open core work [ 10.828482] Send new block cmd [ 10.933079] pwm_percent{20} [ 10.936014] timeout {0x1b57} [ 10.939030] rev timeout {0x571b0080} [ 10.942852] set_baud cmd_buf[0]{0x86}cmd_buf[1]{0x10}cmd_buf[2]{0x1a}cmd_buf[3]{0x17} [ 10.951032] send BC data: [ 10.951032] 0x0000: 0x03 0x00 0x00 0x00 0x86 0x10 0x1a 0x17 [ 10.960417] send BC data: [ 10.960417] 0x0000: 0x03 0x01 0x00 0x00 0x86 0x10 0x1a 0x17 [ 11.087377] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x25}cmd_buf[3]{0xcd} [ 11.095838] send BC data: [ 11.095838] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x25 0xcd [ 11.106901] send BC data: [ 11.106901] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x25 0xcd [ 11.233857] bitmain_asic_close [ 11.413308] jffs2: jffs2_scan_dirent_node(): Node CRC failed on node at 0x002e07e8: Read 0xffffffff, calculated 0xae2b5a7f [ 11.482687] jffs2: Empty flash at 0x002e081c ends at 0x002e1000 [ 11.844781] jffs2: notice: (147) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found. [ 12.663962] net eth0: initializing cpsw version 1.12 (0) [ 12.671673] net eth0: phy found : id is : 0x7c0f1 [ 12.676632] libphy: PHY 4a101000.mdio:01 not found [ 12.681652] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 15.748072] libphy: 4a101000.mdio:00 - Link is Up - 100/Full [ 32.537449] bitmain-asic: success to unregister device [ 33.559382] compile Jul 24 2015--13:54:18 [ 33.563694] CM_PER_SPI1_CLKCTRL 0x2 [ 33.567369] spi_vaddr 0xfa1a0000 [ 33.570753] version 0x40300a0b [ 33.573949] OMAP2_MCSPI_SYSSTATUS 0x1 [ 33.577777] OMAP2_MCSPI_MODULCTRL 0x1 [ 33.581616] OMAP2_MCSPI_CHCONF0 0x180103c5 [ 33.585957] Initial OMAP2_MCSPI_IRQSTATUS{0x0}OMAP2_MCSPI_IRQENABLE{0x0} [ 33.593079] hash ok [ 33.595305] hashtest OK [ 33.598099] bitmain-asic: success to register device [ 33.724844] Detect hardware version = 4 [ 33.728926] fix hardware version [ 33.732305] hardware_version = 0x4 [ 33.740074] S5 ctrl board test V1.1 [ 33.747652] pwm_percent{20} [ 33.755638] bitmain_asic_open ok [ 33.774489] Detect device [ 33.777360] soft ctrl rst time [ 33.780982] reset hash asic [ 33.784369] clear FPGA nonce buffer [ 34.786615] soft ctrl rst time [ 34.789914] reset hash asic [ 34.792847] clear FPGA nonce buffer [ 35.895986] clear FPGA nonce buffer [ 35.899821] get chain0 reg0x0 [ 35.902929] send BC data: [ 35.902929] 0x0000: 0x03 0x00 0x00 0x1a 0x84 0x00 0x00 0x11 [ 36.009342] chain0 total asic:0 [ 36.012635] clear FPGA nonce buffer [ 36.016410] get chain1 reg0x0 [ 36.019527] send BC data: [ 36.019527] 0x0000: 0x03 0x01 0x00 0x1a 0x84 0x00 0x00 0x11 [ 36.126514] asic cmd return ff908213 [ 36.130259] asic cmd return ff908213 [ 36.134001] asic cmd return ff908213 [ 36.137739] asic cmd return ff908213 [ 36.141478] asic cmd return ff908213 [ 36.145285] asic cmd return ff908213 [ 36.149029] asic cmd return ff908213 [ 36.152769] asic cmd return ff908213 [ 36.156510] asic cmd return ff908213 [ 36.160252] asic cmd return ff908213 [ 36.164069] asic cmd return ff908213 [ 36.167817] asic cmd return ff908213 [ 36.171555] asic cmd return ff908213 [ 36.175300] asic cmd return ff908213 [ 36.179036] asic cmd return ff908213 [ 36.182855] asic cmd return ff908213 [ 36.186605] asic cmd return ff908213 [ 36.190343] asic cmd return ff908213 [ 36.194083] asic cmd return ff908213 [ 36.197821] asic cmd return ff908213 [ 36.201631] asic cmd return ff908213 [ 36.205372] asic cmd return ff908213 [ 36.209118] asic cmd return ff908213 [ 36.212860] asic cmd return ff908213 [ 36.216600] asic cmd return ff908213 [ 36.220415] asic cmd return ff908213 [ 36.224161] asic cmd return ff908213 [ 36.227908] asic cmd return ff908213 [ 36.231651] asic cmd return ff908213 [ 36.235395] asic cmd return ff908213 [ 36.239208] chain1 total asic:30 [ 36.242590] pos0--addr:ff [ 36.245340] pos1--addr:ff [ 36.248086] pos2--addr:ff [ 36.250831] pos3--addr:ff [ 36.253573] pos4--addr:ff [ 36.256317] pos5--addr:ff [ 36.259059] pos6--addr:ff [ 36.261805] pos7--addr:ff [ 36.264550] pos8--addr:ff [ 36.267291] pos9--addr:ff [ 36.270032] pos10--addr:ff [ 36.272865] pos11--addr:ff [ 36.275694] pos12--addr:ff [ 36.278528] pos13--addr:ff [ 36.281359] pos14--addr:ff [ 36.284196] pos15--addr:ff [ 36.287026] pos16--addr:ff [ 36.289856] pos17--addr:ff [ 36.292690] pos18--addr:ff [ 36.295528] pos19--addr:ff [ 36.298359] pos20--addr:ff [ 36.301193] pos21--addr:ff [ 36.304024] pos22--addr:ff [ 36.306857] pos23--addr:ff [ 36.309691] pos24--addr:ff [ 36.312521] pos25--addr:ff [ 36.315349] pos26--addr:ff [ 36.318184] pos27--addr:ff [ 36.321018] pos28--addr:ff [ 36.323855] pos29--addr:ff [ 36.326692] chain1_asic_exist{0x3fffffff} [ 36.330900] total chain_num{2} [ 36.334096] chain0 chain_map 0 [ 36.337292] chain0 asic_num--0 actual--0 [ 36.341404] chain0 sw addr interval 8 [ 36.345230] chain1 chain_map 1 [ 36.348425] chain1 asic_num--32 actual--30 [ 36.352705] chain1 sw addr interval 8 [ 36.356533] clear FPGA nonce buffer [ 36.664476] btm_tx_conf [ 36.667094] fan pwm valid {160} [ 36.670389] Set asic frequency {350} [ 36.674131] set_voltage cmd_buf[0]{0xaa}cmd_buf[1]{0xb7}cmd_buf[2]{0x6}cmd_buf[3]{0xc6} [ 36.682498] send BC data: [ 36.682498] 0x0000: 0x03 0x00 0x00 0x1a 0xaa 0xb7 0x06 0xc6 [ 36.692840] send BC data: [ 36.692840] 0x0000: 0x03 0x01 0x00 0x1a 0xaa 0xb7 0x06 0xc6 [ 36.819798] Set chip_addr{0x0}reg_address{0x4}value{0x820d} [ 36.825645] timeout {0x1b57} [ 36.828665] rev timeout {0x571b0080} [ 36.832583] close chain0 core [ 36.835712] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4} [ 36.844165] send BC data: [ 36.844165] 0x0000: 0x03 0x00 0x00 0x1a 0x82 0x0d 0x82 0x04 [ 36.852993] chain0 inactive [ 36.855923] send BC data: [ 36.855923] 0x0000: 0x03 0x00 0x00 0x1a 0x85 0x00 0x00 0x0f [ 36.866668] send BC data: [ 36.866668] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x00 0x00 0x19 [ 36.876433] send BC data: [ 36.876433] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x08 0x00 0x1f [ 36.886198] send BC data: [ 36.886198] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x10 0x00 0x15 [ 36.895964] send BC data: [ 36.895964] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x18 0x00 0x13 [ 36.905730] send BC data: [ 36.905730] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x20 0x00 0x01 [ 36.915496] send BC data: [ 36.915496] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x28 0x00 0x07 [ 36.925261] send BC data: [ 36.925261] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x30 0x00 0x0d [ 36.935027] send BC data: [ 36.935027] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x38 0x00 0x0b [ 36.944792] send BC data: [ 36.944792] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x40 0x00 0x0c [ 36.954558] send BC data: [ 36.954558] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x48 0x00 0x0a [ 36.964324] send BC data: [ 36.964324] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x50 0x00 0x00 [ 36.974089] send BC data: [ 36.974089] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x58 0x00 0x06 [ 36.983854] send BC data: [ 36.983854] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x60 0x00 0x14 [ 36.993620] send BC data: [ 36.993620] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x68 0x00 0x12 [ 37.003405] send BC data: [ 37.003405] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x70 0x00 0x18 [ 37.013165] send BC data: [ 37.013165] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x78 0x00 0x1e [ 37.022919] send BC data: [ 37.022919] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x80 0x00 0x16 [ 37.032683] send BC data: [ 37.032683] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x88 0x00 0x10 [ 37.042449] send BC data: [ 37.042449] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x90 0x00 0x1a [ 37.052214] send BC data: [ 37.052214] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0x98 0x00 0x1c [ 37.061979] send BC data: [ 37.061979] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa0 0x00 0x0e [ 37.071739] send BC data: [ 37.071739] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xa8 0x00 0x08 [ 37.081511] send BC data: [ 37.081511] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb0 0x00 0x02 [ 37.091277] send BC data: [ 37.091277] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xb8 0x00 0x04 [ 37.101042] send BC data: [ 37.101042] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc0 0x00 0x03 [ 37.110808] send BC data: [ 37.110808] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xc8 0x00 0x05 [ 37.120573] send BC data: [ 37.120573] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd0 0x00 0x0f [ 37.130339] send BC data: [ 37.130339] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xd8 0x00 0x09 [ 37.140107] send BC data: [ 37.140107] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe0 0x00 0x1b [ 37.149871] send BC data: [ 37.149871] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xe8 0x00 0x1d [ 37.159636] send BC data: [ 37.159636] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf0 0x00 0x17 [ 37.171370] send BC data: [ 37.171370] 0x0000: 0x03 0x00 0x00 0x1a 0x01 0xf8 0x00 0x11 [ 37.181121] send BC data: [ 37.181121] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x00 0x9a 0x04 [ 37.190888] Sending open core work [ 37.194447] Send new block cmd [ 37.197770] asic cmd return fcbfc01e [ 37.201521] chain0 reg crc_r{0x1c}crc{0x13} Err ret{0xfcbfc01e} [ 37.599211] close chain1 core [ 37.602334] set_frequency cmd_buf[0]{0x82}cmd_buf[1]{0xd}cmd_buf[2]{0x82}cmd_buf[3]{0x4} [ 37.610793] send BC data: [ 37.610793] 0x0000: 0x03 0x01 0x00 0x1a 0x82 0x0d 0x82 0x04 [ 37.618615] chain1 inactive [ 37.621541] send BC data: [ 37.621541] 0x0000: 0x03 0x01 0x00 0x1a 0x85 0x00 0x00 0x0f [ 37.632286] send BC data: [ 37.632286] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x00 0x00 0x19 [ 37.642058] send BC data: [ 37.642058] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x08 0x00 0x1f [ 37.651823] send BC data: [ 37.651823] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x10 0x00 0x15 [ 37.661589] send BC data: [ 37.661589] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x18 0x00 0x13 [ 37.671355] send BC data: [ 37.671355] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x20 0x00 0x01 [ 37.681121] send BC data: [ 37.681121] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x28 0x00 0x07 [ 37.690894] send BC data: [ 37.690894] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x30 0x00 0x0d [ 37.700653] send BC data: [ 37.700653] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x38 0x00 0x0b [ 37.710484] send BC data: [ 37.710484] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x40 0x00 0x0c [ 37.720193] send BC data: [ 37.720193] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x48 0x00 0x0a [ 37.729949] send BC data: [ 37.729949] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x50 0x00 0x00 [ 37.739714] send BC data: [ 37.739714] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x58 0x00 0x06 [ 37.749480] send BC data: [ 37.749480] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x60 0x00 0x14 [ 37.759304] send BC data: [ 37.759304] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x68 0x00 0x12 [ 37.769013] send BC data: [ 37.769013] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x70 0x00 0x18 [ 37.778777] send BC data: [ 37.778777] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x78 0x00 0x1e [ 37.788543] send BC data: [ 37.788543] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x80 0x00 0x16 [ 37.798308] send BC data: [ 37.798308] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x88 0x00 0x10 [ 37.808073] send BC data: [ 37.808073] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x90 0x00 0x1a [ 37.817840] send BC data: [ 37.817840] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0x98 0x00 0x1c [ 37.827605] send BC data: [ 37.827605] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa0 0x00 0x0e [ 37.837370] send BC data: [ 37.837370] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xa8 0x00 0x08 [ 37.847136] send BC data: [ 37.847136] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb0 0x00 0x02 [ 37.858858] send BC data: [ 37.858858] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xb8 0x00 0x04 [ 37.868621] send BC data: [ 37.868621] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc0 0x00 0x03 [ 37.878386] send BC data: [ 37.878386] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xc8 0x00 0x05 [ 37.888151] send BC data: [ 37.888151] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd0 0x00 0x0f [ 37.897918] send BC data: [ 37.897918] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xd8 0x00 0x09 [ 37.907683] send BC data: [ 37.907683] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe0 0x00 0x1b [ 37.917448] send BC data: [ 37.917448] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xe8 0x00 0x1d [ 37.927214] send BC data: [ 37.927214] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf0 0x00 0x17 [ 37.936980] send BC data: [ 37.936980] 0x0000: 0x03 0x01 0x00 0x1a 0x01 0xf8 0x00 0x11 [ 37.946739] send BC data: [ 37.946739] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x00 0x9a 0x04 [ 37.956513] Sending open core work [ 37.960077] Send new block cmd [ 38.355071] send BC data: [ 38.355071] 0x0000: 0x03 0x00 0x00 0x1a 0x86 0x10 0x05 0x18 [ 38.362753] send BC data: [ 38.362753] 0x0000: 0x03 0x01 0x00 0x1a 0x86 0x10 0x05 0x18 [ 38.372547] send BC data: [ 38.372547] 0x0000: 0x03 0x20 0x00 0x05 0x86 0x10 0x05 0x04 [ 38.380049] timeout {0x176ff} [ 38.383166] rev timeout {0xff760180} [ 38.386965] open core [ 38.389346] send BC data: [ 38.389346] 0x0000: 0x03 0x00 0x00 0x05 0x86 0x00 0x85 0x0b [ 38.397912] send BC data: [ 38.397912] 0x0000: 0x03 0x01 0x00 0x05 0x86 0x00 0x85 0x0b [ 38.412046] Timeout {3} [ 38.414614] Snd Time Interval {64}ms [ 38.418362] Adj Snd Time Interval {64}ms [ 38.422462] Set bitmain configure [ 38.425925] clear FPGA nonce buffer [ 39.440444] get chain0 reg0x4 [ 39.443596] send BC data: [ 39.443596] 0x0000: 0x03 0x00 0x00 0x05 0x84 0x00 0x04 0x00 [ 39.451946] Change diff to 14 [ 39.455113] diff fix to 6 [ 39.457861] Change net_diff to 42 [ 39.462533] ch1-as0: dev->task_buffer_wr{0x00000020}rd{0x00000000}ret work_id{0x8000} don't match task_buffer_match{0x0000} [ 39.474274] chain1 - HW1 [ 39.484757] temp_highest{28} [ 39.487787] Customized fan speed {160} [ 39.491705] pwm_percent{100} [ 39.524963] Fan0 speed 2280, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 39.524963] error_fan 5, normal_fan 0, fan_num 1 [ 39.547427] [ 39.547427] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 39.556697] g_FPGA_FIFO_SPACE 32, fifo_space{16224} [ 39.561793] ret_nonce_num = 1, snd_to_fpga_work{32} [ 39.566890] total ret nonce num = 0, diff1_nonce num = 0 [ 39.572441] gDiff_nonce_num{0}gNonce_Err{1} [ 39.576825] gSubmit_nonce_num{0} [ 39.580205] chain0 asic00 ret nonce_num{1} [ 39.584484] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 39.589950] dev->temp_out_ctrl{1} [ 39.589950] [ 39.594959] fifo_state 0 temp_state 0 fan_state 1 [ 44.589463] jiffies{-130771}, open{-133934},dev->wait_timeout{1} [ 44.595763] timeout {0xbb7} [ 44.598687] rev timeout {0xb70b0080} [ 49.526986] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 49.526986] error_fan 5, normal_fan 1, fan_num 1 [ 49.549464] [ 49.549464] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 49.558738] g_FPGA_FIFO_SPACE 43, fifo_space{654} [ 49.563650] ret_nonce_num = 17, snd_to_fpga_work{3326} [ 49.569022] total ret nonce num = 16, diff1_nonce num = 1024 [ 49.574931] gDiff_nonce_num{0}gNonce_Err{1} [ 49.579310] gSubmit_nonce_num{0} [ 49.582690] chain0 asic01 ret nonce_num{0} [ 49.586973] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 49.592437] dev->temp_out_ctrl{1} [ 49.592437] [ 49.597452] fifo_state 0 temp_state 0 fan_state 0 [ 51.468741] temp_highest{30} [ 51.471819] Customized fan speed {160} [ 51.475753] pwm_percent{100} [ 55.906155] temp_highest{32} [ 55.909208] Customized fan speed {160} [ 55.913132] pwm_percent{100} [ 59.281255] temp_highest{34} [ 59.284301] Customized fan speed {160} [ 59.288224] pwm_percent{100} [ 59.528970] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 59.528970] error_fan 5, normal_fan 1, fan_num 1 [ 59.551445] [ 59.551445] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 59.560725] g_FPGA_FIFO_SPACE 44, fifo_space{531} [ 59.565639] ret_nonce_num = 51, snd_to_fpga_work{9865} [ 59.571012] total ret nonce num = 50, diff1_nonce num = 3200 [ 59.576926] gDiff_nonce_num{0}gNonce_Err{1} [ 59.581300] gSubmit_nonce_num{0} [ 59.584674] chain0 asic02 ret nonce_num{0} [ 59.588959] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 59.594425] dev->temp_out_ctrl{1} [ 59.594425] [ 59.599438] fifo_state 0 temp_state 0 fan_state 0 [ 64.158203] temp_highest{36} [ 64.161255] Customized fan speed {160} [ 64.165178] pwm_percent{100} [ 69.530921] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 69.530921] error_fan 5, normal_fan 1, fan_num 1 [ 69.553418] [ 69.553418] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 69.562685] g_FPGA_FIFO_SPACE 43, fifo_space{490} [ 69.567612] ret_nonce_num = 75, snd_to_fpga_work{16405} [ 69.573066] total ret nonce num = 74, diff1_nonce num = 4736 [ 69.578984] gDiff_nonce_num{0}gNonce_Err{1} [ 69.583359] gSubmit_nonce_num{0} [ 69.586736] chain0 asic03 ret nonce_num{0} [ 69.591019] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 69.596496] dev->temp_out_ctrl{1} [ 69.596496] [ 69.601505] fifo_state 0 temp_state 0 fan_state 0 [ 70.910239] temp_highest{38} [ 70.913279] Customized fan speed {160} [ 70.917210] pwm_percent{100} [ 78.160228] temp_highest{40} [ 78.163278] Customized fan speed {160} [ 78.167200] pwm_percent{100} [ 79.532860] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 79.532860] error_fan 5, normal_fan 1, fan_num 1 [ 79.555582] [ 79.555582] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 79.564856] g_FPGA_FIFO_SPACE 43, fifo_space{449} [ 79.569773] ret_nonce_num = 92, snd_to_fpga_work{22944} [ 79.575238] total ret nonce num = 91, diff1_nonce num = 5824 [ 79.581159] gDiff_nonce_num{0}gNonce_Err{1} [ 79.585533] gSubmit_nonce_num{0} [ 79.588906] chain0 asic04 ret nonce_num{0} [ 79.593199] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 79.598676] dev->temp_out_ctrl{1} [ 79.598676] [ 79.603700] fifo_state 0 temp_state 0 fan_state 0 [ 84.909788] ch1-as29: dev->task_buffer_wr{0x00001efd}rd{0x0000235b}ret work_id{0xa2c3} don't match task_buffer_match{0x22c3} [ 84.921622] chain1 - HW2 [ 89.534820] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 89.534820] error_fan 5, normal_fan 1, fan_num 1 [ 89.557289] [ 89.557289] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 89.566552] g_FPGA_FIFO_SPACE 44, fifo_space{408} [ 89.571471] ret_nonce_num = 114, snd_to_fpga_work{29483} [ 89.577026] total ret nonce num = 112, diff1_nonce num = 7168 [ 89.583025] gDiff_nonce_num{0}gNonce_Err{2} [ 89.587397] gSubmit_nonce_num{0} [ 89.590775] chain0 asic05 ret nonce_num{0} [ 89.595058] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 89.600521] dev->temp_out_ctrl{1} [ 89.600521] [ 89.605531] fifo_state 0 temp_state 0 fan_state 0 [ 89.913993] temp_highest{42} [ 89.917029] Customized fan speed {160} [ 89.920951] pwm_percent{100} [ 99.536755] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 99.536755] error_fan 5, normal_fan 1, fan_num 1 [ 99.559231] [ 99.559231] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 99.568492] g_FPGA_FIFO_SPACE 44, fifo_space{368} [ 99.573405] ret_nonce_num = 133, snd_to_fpga_work{36023} [ 99.578954] total ret nonce num = 131, diff1_nonce num = 8384 [ 99.584957] gDiff_nonce_num{0}gNonce_Err{2} [ 99.589324] gSubmit_nonce_num{0} [ 99.592700] chain0 asic06 ret nonce_num{0} [ 99.596978] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 99.602446] dev->temp_out_ctrl{1} [ 99.602446] [ 99.607457] fifo_state 0 temp_state 0 fan_state 0 [ 109.538703] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 109.538703] error_fan 5, normal_fan 1, fan_num 1 [ 109.561189] [ 109.561189] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 109.570518] g_FPGA_FIFO_SPACE 42, fifo_space{328} [ 109.575437] ret_nonce_num = 152, snd_to_fpga_work{42563} [ 109.580988] total ret nonce num = 150, diff1_nonce num = 9600 [ 109.586994] gDiff_nonce_num{0}gNonce_Err{2} [ 109.591373] gSubmit_nonce_num{0} [ 109.594746] chain0 asic07 ret nonce_num{0} [ 109.599030] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 109.604501] dev->temp_out_ctrl{1} [ 109.604501] [ 109.609514] fifo_state 0 temp_state 0 fan_state 0 [ 112.667982] temp_highest{44} [ 112.671029] Customized fan speed {160} [ 112.674952] pwm_percent{100} [ 113.199772] Change diff to 13 [ 113.202916] diff fix to 6 [ 119.540664] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 119.540664] error_fan 5, normal_fan 1, fan_num 1 [ 119.563144] [ 119.563144] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 119.572418] g_FPGA_FIFO_SPACE 44, fifo_space{244} [ 119.577337] ret_nonce_num = 176, snd_to_fpga_work{49101} [ 119.582887] total ret nonce num = 174, diff1_nonce num = 11136 [ 119.588982] gDiff_nonce_num{0}gNonce_Err{2} [ 119.593354] gSubmit_nonce_num{0} [ 119.596738] chain0 asic08 ret nonce_num{0} [ 119.601021] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 119.606496] dev->temp_out_ctrl{1} [ 119.606496] [ 119.611500] fifo_state 0 temp_state 0 fan_state 0 [ 129.480101] jiffies{-87307}dev->cgminer_start_time{-133397}time_elasp_ms =90019ms dev->total_nonce_num{194} [ 129.490327] bgNonce_average{1} [ 129.493525] chain0 Chain_nonce_nu[2] Chain_nonce_nu_last[0] [ 129.499352] bgNonce_average{1} [ 129.502545] chain1 Chain_nonce_nu[196] Chain_nonce_nu_last[0] [ 129.542538] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 129.542538] error_fan 5, normal_fan 1, fan_num 1 [ 129.565000] [ 129.565000] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 129.574264] g_FPGA_FIFO_SPACE 25, fifo_space{223} [ 129.579184] ret_nonce_num = 196, snd_to_fpga_work{55660} [ 129.584745] total ret nonce num = 194, diff1_nonce num = 12416 [ 129.590846] gDiff_nonce_num{0}gNonce_Err{2} [ 129.595216] gSubmit_nonce_num{0} [ 129.598594] chain0 asic09 ret nonce_num{0} [ 129.602873] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 129.608342] dev->temp_out_ctrl{1} [ 129.608342] [ 129.613359] fifo_state 0 temp_state 0 fan_state 0 [ 139.544546] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 139.544546] error_fan 5, normal_fan 1, fan_num 1 [ 139.567038] [ 139.567038] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 139.576304] g_FPGA_FIFO_SPACE 42, fifo_space{205} [ 139.581228] ret_nonce_num = 212, snd_to_fpga_work{62181} [ 139.586785] total ret nonce num = 210, diff1_nonce num = 13440 [ 139.592880] gDiff_nonce_num{0}gNonce_Err{2} [ 139.597258] gSubmit_nonce_num{0} [ 139.600632] chain0 asic10 ret nonce_num{0} [ 139.604915] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 139.610385] dev->temp_out_ctrl{1} [ 139.610385] [ 139.615401] fifo_state 0 temp_state 0 fan_state 0 [ 144.260894] Change diff to 12 [ 144.264039] diff fix to 6 [ 149.546549] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 149.546549] error_fan 5, normal_fan 1, fan_num 1 [ 149.569009] [ 149.569009] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 149.578276] g_FPGA_FIFO_SPACE 44, fifo_space{162} [ 149.583188] ret_nonce_num = 234, snd_to_fpga_work{68719} [ 149.588746] total ret nonce num = 232, diff1_nonce num = 14848 [ 149.594839] gDiff_nonce_num{0}gNonce_Err{2} [ 149.599210] gSubmit_nonce_num{0} [ 149.602588] chain0 asic11 ret nonce_num{0} [ 149.606870] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 149.612341] dev->temp_out_ctrl{1} [ 149.612341] [ 149.617354] fifo_state 0 temp_state 0 fan_state 0 [ 154.361440] match diff 12 hash2_32[6]{0x000ceaba} [ 159.548460] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 159.548460] error_fan 5, normal_fan 1, fan_num 1 [ 159.570943] [ 159.570943] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 159.580224] g_FPGA_FIFO_SPACE 44, fifo_space{122} [ 159.585139] ret_nonce_num = 255, snd_to_fpga_work{75259} [ 159.590687] total ret nonce num = 253, diff1_nonce num = 16192 [ 159.596773] gDiff_nonce_num{1}gNonce_Err{2} [ 159.601145] gSubmit_nonce_num{1} [ 159.604519] chain0 asic12 ret nonce_num{0} [ 159.608800] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 159.614268] dev->temp_out_ctrl{1} [ 159.614268] [ 159.619279] fifo_state 0 temp_state 0 fan_state 0 [ 169.550424] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 169.550424] error_fan 5, normal_fan 1, fan_num 1 [ 169.572906] [ 169.572906] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 169.582172] g_FPGA_FIFO_SPACE 43, fifo_space{288} [ 169.587087] ret_nonce_num = 284, snd_to_fpga_work{81799} [ 169.592636] total ret nonce num = 282, diff1_nonce num = 18048 [ 169.598733] gDiff_nonce_num{1}gNonce_Err{2} [ 169.603110] gSubmit_nonce_num{1} [ 169.606484] chain0 asic13 ret nonce_num{0} [ 169.610772] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 169.616250] dev->temp_out_ctrl{1} [ 169.616250] [ 169.621272] fifo_state 0 temp_state 0 fan_state 0 [ 175.468177] Change diff to 11 [ 175.471309] diff fix to 6 [ 178.802341] match diff 11 hash2_32[6]{0x000bd8d9} [ 179.552385] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 179.552385] error_fan 5, normal_fan 1, fan_num 1 [ 179.574862] [ 179.574862] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 179.584127] g_FPGA_FIFO_SPACE 44, fifo_space{266} [ 179.589044] ret_nonce_num = 313, snd_to_fpga_work{88337} [ 179.594595] total ret nonce num = 311, diff1_nonce num = 19904 [ 179.600683] gDiff_nonce_num{2}gNonce_Err{2} [ 179.605051] gSubmit_nonce_num{2} [ 179.608424] chain0 asic14 ret nonce_num{0} [ 179.612707] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 179.618178] dev->temp_out_ctrl{1} [ 179.618178] [ 179.623200] fifo_state 0 temp_state 0 fan_state 0 [ 189.554352] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 189.554352] error_fan 5, normal_fan 1, fan_num 1 [ 189.576967] [ 189.576967] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 189.586228] g_FPGA_FIFO_SPACE 44, fifo_space{654} [ 189.591143] ret_nonce_num = 329, snd_to_fpga_work{94877} [ 189.596692] total ret nonce num = 327, diff1_nonce num = 20928 [ 189.602788] gDiff_nonce_num{2}gNonce_Err{2} [ 189.607156] gSubmit_nonce_num{2} [ 189.610533] chain0 asic15 ret nonce_num{0} [ 189.614810] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 189.620284] dev->temp_out_ctrl{1} [ 189.620284] [ 189.625292] fifo_state 0 temp_state 0 fan_state 0 [ 199.556266] Fan0 speed 3840, pwm_percent 100 Fan1 speed 0, pwm_percent 100 Fan2 speed 0, pwm_percent 100 Fan3 speed 0, pwm_percent 100 Fan4 speed 0, pwm_percent 100 Fan5 speed 0, pwm_percent 100 [ 199.556266] error_fan 5, normal_fan 1, fan_num 1 [ 199.578739] [ 199.578739] chain exist: 3, g_TOTAL_FPGA_FIFO 0x800,g_FPGA_RESERVE_FIFO_SPACE{4} [ 199.588016] g_FPGA_FIFO_SPACE 43, fifo_space{572} [ 199.592931] ret_nonce_num = 349, snd_to_fpga_work{101417} [ 199.598571] total ret nonce num = 347, diff1_nonce num = 22208 [ 199.604658] gDiff_nonce_num{2}gNonce_Err{2} [ 199.609034] gSubmit_nonce_num{2} [ 199.612409] chain0 asic16 ret nonce_num{1} [ 199.616696] dev->net_diff_sh_bit{42}dev->get_blk_num{0} [ 199.622169] dev->temp_out_ctrl{1}
(Moderator's note: This post was edited by frodocooper to add code tags to the log and to remove inline image tags.)
|