MoreBloodWine (OP)
Legendary
Offline
Activity: 1064
Merit: 1001
|
|
November 06, 2013, 12:43:08 PM |
|
If I need three USB ports and the rPi only has 2, can I use a splitter on one o the rPi ports ?
Basically it's one port for a wifi thing and two ports needed or a hub setup.
|
To be decided...
|
|
|
RaTTuS
|
|
November 06, 2013, 12:51:23 PM |
|
use a POWERED USB Hub
|
In the Beginning there was CPU , then GPU , then FPGA then ASIC, what next I hear to ask ....
1RaTTuSEN7jJUDiW1EGogHwtek7g9BiEn
|
|
|
balanghai
|
|
November 06, 2013, 12:55:08 PM |
|
Powered USB Hub costs at around $10 only. So you should have one.
|
|
|
|
kiwigrc
Newbie
Offline
Activity: 4
Merit: 0
|
|
November 06, 2013, 12:56:57 PM |
|
Hey. From what I remember when looking at the Pi, there has to be a list somewhere of certain brands/models of externally powered usb hubs that are actually recommended for raspberry Pi. I guess a simple random usb hub might have power issues if not incompatibility but one can always try!
|
|
|
|
RaTTuS
|
|
November 06, 2013, 01:02:53 PM |
|
99% of powered hubs will be fine, just make sure it has a good PSU you can use it to power the RPi also so you only have one wall plug
|
In the Beginning there was CPU , then GPU , then FPGA then ASIC, what next I hear to ask ....
1RaTTuSEN7jJUDiW1EGogHwtek7g9BiEn
|
|
|
balanghai
|
|
November 06, 2013, 01:17:05 PM |
|
If you forgot the USB stands for UNIVERSAL SERIAL BUS. So you cannot say that one brand or the other is the "recommended" for the rPi. Also the main issues on the USB Miners are the cord and the power supply. If you are using a dirt cheap and long cable, you will have a problem. If you have a good power supply to power the hub, make sure you have a high quality usb cable. And that is up to your budget also.
|
|
|
|
Flashman
|
|
November 06, 2013, 01:19:56 PM |
|
Although you'd think all hubs would be the same, there are some that don't like the Pi or vice versa, there's some pages/wikis around on the web with listings of "good" and "bad" hubs.
So if you're spending cash, googlum, if you've got half a dozen lying around, try them out.
|
TL;DR See Spot run. Run Spot run. .... .... Freelance interweb comedian, for teh lulz >>> 1MqAAR4XkJWfDt367hVTv5SstPZ54Fwse6
Bitcoin Custodian: Keeping BTC away from weak heads since Feb '13, adopter of homeless bitcoins.
|
|
|
Matumaru
Member
Offline
Activity: 73
Merit: 10
|
|
November 06, 2013, 01:41:24 PM |
|
True. You can find it here: http://elinux.org/RPi_Powered_USB_HubsPay attention on Power Rating, and allways think about the future needs, not only for now. Also don´t forget to choose a "paralel" usb plug disposition because of space saving.
|
|
|
|
Flashman
|
|
November 06, 2013, 01:57:11 PM |
|
^5 Matu, just the page I was thinking of, but temporarily blanked on how to get to it or where it was filed in my monster pile of bookmarks.
|
TL;DR See Spot run. Run Spot run. .... .... Freelance interweb comedian, for teh lulz >>> 1MqAAR4XkJWfDt367hVTv5SstPZ54Fwse6
Bitcoin Custodian: Keeping BTC away from weak heads since Feb '13, adopter of homeless bitcoins.
|
|
|
MoreBloodWine (OP)
Legendary
Offline
Activity: 1064
Merit: 1001
|
|
November 06, 2013, 02:03:27 PM |
|
I already have a powerd hub in mind I want to use that works with the Pi but it takes two USB ports to interface. I was thinking o using a y splitter on one of the rPi ports and the other or the wifi thing hence this question.
|
To be decided...
|
|
|
RaTTuS
|
|
November 06, 2013, 02:05:35 PM |
|
...i but it takes two USB ports to interface. ...
WHAT? post a link to this thing please
|
In the Beginning there was CPU , then GPU , then FPGA then ASIC, what next I hear to ask ....
1RaTTuSEN7jJUDiW1EGogHwtek7g9BiEn
|
|
|
MoreBloodWine (OP)
Legendary
Offline
Activity: 1064
Merit: 1001
|
|
November 06, 2013, 02:12:19 PM |
|
...i but it takes two USB ports to interface. ...
WHAT? post a link to this thing please 20 port hub on eBay, I've talked to a few people that say it works fine with the Pi iff you get a better brick for it. You can't see it from the imagges listed in the listin bu it interfaces with two USB cables. I assume you could get by with one but I wouldnt know. http://www.ebay.com/itm/151155337245?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1188wt_1170As for powering the Pi, I'm gonna be using an wall charger thats 1500ma.
|
To be decided...
|
|
|
RaTTuS
|
|
November 06, 2013, 02:46:46 PM |
|
OIC so those are actually 2x 10 port devices I think you are going to have to sacrifice one of them for your wireless ..... or daisy chain one from the other - why not just use the wired ethernet on the RPi ?
|
In the Beginning there was CPU , then GPU , then FPGA then ASIC, what next I hear to ask ....
1RaTTuSEN7jJUDiW1EGogHwtek7g9BiEn
|
|
|
MoreBloodWine (OP)
Legendary
Offline
Activity: 1064
Merit: 1001
|
|
November 06, 2013, 02:52:53 PM |
|
OIC so those are actually 2x 10 port devices I think you are going to have to sacrifice one of them for your wireless ..... or daisy chain one from the other - why not just use the wired ethernet on the RPi ?
Well this is what I was thinking which should work. 1st rPi port: Wireless Edimax thing. 2nd rPi port: http://www.ebay.com/itm/200965093125?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649Then in that splitter I can add the two USB cables form hat hub, and as you said which I confirmed a few minutes ago. It's actually a 2 x 10 port hub setup. As for wired ether, I just don't want to use more cables than I need to... my room already looks like a noc cener with wires lol.
|
To be decided...
|
|
|
Matumaru
Member
Offline
Activity: 73
Merit: 10
|
|
November 07, 2013, 01:28:49 PM |
|
I already have a powerd hub in mind I want to use that works with the Pi but it takes two USB ports to interface. I was thinking o using a y splitter on one of the rPi ports and the other or the wifi thing hence this question.
Advice for good performance, less HW errors, and longlasting devices: -No usb splitters -No chained usb HUBS (pwrd, not-pwrd) -Attach WLAN dongle directly to the Pi (my advice on this will be Wi-Pi dongle). -Be carefull with "plug in-plug out" of USB. rPi also gets powered from the USB ports, no only the microUSB. -Don´t feed the PWR to the rPi from the same HUB you are using for miners. -If you look for a wireless Keyboard/Mouse set for rPi I would recommend Logitec MK220. Durable, compact, and works perfection with the rPi without any install. PD: I´ve made more or less the same setting few months ago so you can figure how many hours took me to figure all those things
|
|
|
|
madcratebuilder
Member
Offline
Activity: 70
Merit: 10
|
|
November 07, 2013, 04:53:59 PM |
|
If you forgot the USB stands for UNIVERSAL SERIAL BUS. So you cannot say that one brand or the other is the "recommended" for the rPi. Also the main issues on the USB Miners are the cord and the power supply. If you are using a dirt cheap and long cable, you will have a problem. If you have a good power supply to power the hub, make sure you have a high quality usb cable. And that is up to your budget also. There is a "recommend" usb hub list put out by the Pi foundation. The Pi has very basic usb 2.0 support. The usb wifi warts have better performance when plugged into a powered hub, the Pi's port just does not supply enough power sometimes. I would not use the Pi's port to power anything, keyboard and mouse only. I have used the following hubs with the Pi. D-Link 7 port, 3 amp psu runs 5 OK sometimes 6. Rosewill RHB-500, 10 port, 4 amp psu, runs 8 OK. I run 8+ a fan OK. Rosewill RHB-520, 10 port, 3.5 amp psu, runs 7 OK. Block Erupter, 49 port, runs from atx psu. I'm using a cheap Apevia as520w atx psu, powers all 49 ports and gives excellent hash rate, I get 16.5Gh/s I have had up to 60 miners on a single Pi but I would see a increase in rejects and hw errors. I keep rejects under .3% and errors under .8%. If you see less than the 333 hash rate it means you are not supplying enough power. More than 20 miners bfgm seems to work better than cgm. YMMV -Be carefull with "plug in-plug out" of USB. rPi also gets powered from the USB ports, no only the microUSB. -Don´t feed the PWR to the rPi from the same HUB you are using for miners. I know some well back power the Pi with the usb port, I know some have let the magic smoke out of the Pi doing this. A quality usb hub well not allow back power through the port. Power from the usb port is not fused, zero protection.
|
|
|
|
Matumaru
Member
Offline
Activity: 73
Merit: 10
|
|
November 08, 2013, 07:26:44 AM |
|
I know some well back power the Pi with the usb port, I know some have let the magic smoke out of the Pi doing this. A quality usb hub well not allow back power through the port. Power from the usb port is not fused, zero protection.
Big surprise the first I tried to "reboot" my rPi with AMs! Unplug the pwr microUSB and still working haha
|
|
|
|
MoreBloodWine (OP)
Legendary
Offline
Activity: 1064
Merit: 1001
|
|
November 08, 2013, 01:03:46 PM |
|
I know some well back power the Pi with the usb port, I know some have let the magic smoke out of the Pi doing this. A quality usb hub well not allow back power through the port. Power from the usb port is not fused, zero protection.
Big surprise the first I tried to "reboot" my rPi with AMs! Unplug the pwr microUSB and still working haha My Pi will be getting it's power from a 1.5ma wall wort, the only USB connections it will have from he hub are from those small house looking ports witth the flatt roof if ya follow me lol.
|
To be decided...
|
|
|
Flashman
|
|
November 08, 2013, 02:11:03 PM |
|
I hope you either mean 1.5A or 1500mA
|
TL;DR See Spot run. Run Spot run. .... .... Freelance interweb comedian, for teh lulz >>> 1MqAAR4XkJWfDt367hVTv5SstPZ54Fwse6
Bitcoin Custodian: Keeping BTC away from weak heads since Feb '13, adopter of homeless bitcoins.
|
|
|
MoreBloodWine (OP)
Legendary
Offline
Activity: 1064
Merit: 1001
|
|
November 08, 2013, 03:15:08 PM |
|
I hope you either mean 1.5A or 1500mA I do lol
|
To be decided...
|
|
|
|