Bitcoin Forum
May 26, 2024, 04:55:20 AM *
News: Latest Bitcoin Core release: 27.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: [1]
  Print  
Author Topic: My first rig - 1X Vega 64 - Some advices please  (Read 113 times)
solutions4w (OP)
Newbie
*
Offline Offline

Activity: 7
Merit: 1


View Profile
May 01, 2018, 01:18:52 PM
 #1

Hello,
After few months and many post readed there i started my rig 4 days ago.

- Asrock H110 Pro BTC+
- Intel G4560
- 1x Crutial 8go
- Evga 1000
- 1x Sapphire Vega 64 Nitro+

I followed http://vega.miningguides.com so i installed AMD Blockchain drivers.

First, i was surprised to have immediatly around 1600 h/s on CryptoNightV7 with xmr-stack
Best result was with SRBMiner, around 1800 h/s.

But to reach the 2000 h/s it was more difficult. I used a modded reg, and tried many OverdriveNTool variants finded in forums. Some hours...

Finally it's with Cast-XMR-Vega that i have the best hasrate.
Today, i'm at 2020 h/s but stable. Is it good or can i really have better from my Vega 64?

https://imgur.com/a/Do0rTDd

So, if you have some advices or point of view it will be very usefull for me and very appreciated, to be sure my Vega is in safe, and if i can by the second GPU to continue this adventure Smiley

Thanks a lot!
Shnikes101
Full Member
***
Offline Offline

Activity: 254
Merit: 109


View Profile
May 01, 2018, 02:24:24 PM
 #2

2020 H/s is acceptable to me on 64s. You can fine tune further up but for a first attempt that's good if it is stable.

One thing you may want to change is your core clock. I'd drop it to 1408 @ 900 mV or so. You're likely pulling more watts than necessary with 1590 @ 1100 mV on the core.
Also keep a close eye on your temps. May want to bump your min fan speed some.
sebas1382000
Newbie
*
Offline Offline

Activity: 75
Merit: 0


View Profile
May 01, 2018, 02:27:53 PM
 #3

Hello,
After few months and many post readed there i started my rig 4 days ago.

- Asrock H110 Pro BTC+
- Intel G4560
- 1x Crutial 8go
- Evga 1000
- 1x Sapphire Vega 64 Nitro+

I followed http://vega.miningguides.com so i installed AMD Blockchain drivers.

First, i was surprised to have immediatly around 1600 h/s on CryptoNightV7 with xmr-stack
Best result was with SRBMiner, around 1800 h/s.

But to reach the 2000 h/s it was more difficult. I used a modded reg, and tried many OverdriveNTool variants finded in forums. Some hours...

Finally it's with Cast-XMR-Vega that i have the best hasrate.
Today, i'm at 2020 h/s but stable. Is it good or can i really have better from my Vega 64?

https://imgur.com/a/Do0rTDd

So, if you have some advices or point of view it will be very usefull for me and very appreciated, to be sure my Vega is in safe, and if i can by the second GPU to continue this adventure Smiley

Thanks a lot!


Very good rig. You can get very far in this way
solutions4w (OP)
Newbie
*
Offline Offline

Activity: 7
Merit: 1


View Profile
May 01, 2018, 05:11:38 PM
 #4

2020 H/s is acceptable to me on 64s. You can fine tune further up but for a first attempt that's good if it is stable.

One thing you may want to change is your core clock. I'd drop it to 1408 @ 900 mV or so. You're likely pulling more watts than necessary with 1590 @ 1100 mV on the core.
Also keep a close eye on your temps. May want to bump your min fan speed some.

Thanks a lot for answer. I tried to drop to 1408 @ 900mV, and i go down at 1960 H/s. This core clock setting was the only one way i finded to broke the 2000 H/s barrier. Temps are stable too, i will increase a little bit fan speed as you suggest it
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!