Nanofury NF1 not working on Raspbian

[Wongi]

For me bfg miner 3.6.0 is working.

http://s1.directupload.net/images/131221/q535fouy.jpg

[infinitecoin1993]

Got the miners working in putty,



But how i make it working from the web interface? Because its showing no devices.

[snoopy_nzl]

Working fine here after hours of trying...  At least I get ~2.3 GH/s out of the Nanofury.

I'm using bfgminer 3.8.0 (latest git version) and all you have to do (after compiling) is to enforce the USB 2.0 low speed mode to make the USB communication stable. Note: this will also limit the network speed of your Raspi!

The slowdown can be achieved by putting dwc_otg.speed=1 into /boot/cmdline.txt. Note: all statements need to be at one line.

See this page for more infomation: http://www.raspberrypi.org/phpBB3/viewtopic.php?f=28&t=53832#sig411106 (the last section at the bottom.

Question: what does

NFY 0: Frequency drop over 50% detected, reinitialising

mean? I see a lot of these messages.

is it possible to slowdown on windows as well? I see the same frequency issue id love to fix.

[Taint]

There's a patch for cgminer listed in the main 'Nanofury Project - Open Source Design' Topic.

Tested on a linux miner, I haven't tested it under raspian.

I'm seeing considerably higher performance and no more 'Frequency Drop' messages.

[Wongi]

Mineforeman made an update to Minepeon 0.2.4.3
Now Nanofury is supported without hidapi.

http://minepeon.com/forums/viewtopic.php?f=4&t=666&start=50

http://minepeon.com/index.php/Cgminer-HEXu

Still need the USB1 workaround:
sudo nano /boot/cmdline.txt
then add dwc_otg.speed=1 at the end of line

It's working like a charm in Minepeon now 


http://s7.directupload.net/images/140108/temp/lxhkbgra.jpg

http://s1.directupload.net/images/140108/temp/bfi72ctj.jpg