daworm06 (OP)
Newbie
 Offline
Activity: 76
Merit: 0
|
 |
May 31, 2018, 03:15:28 PM
Last edit: May 31, 2018, 10:28:19 PM by frodocooper |
|
I thought I had identified the problem and set all IP addresses as static but that didn't fix the issue. I've searched google and I can not come up with a solution. If anyone has any ideas please advise. [ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-ge8a2f71-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #82 SMP PREEMPT Tue May 16 19:49:53 CST 2017
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000315] ps7-ttc #0 at df804000, irq=43
[ 0.000628] Console: colour dummy device 80x30
[ 0.000661] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090255] pid_max: default: 32768 minimum: 301
[ 0.090480] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090501] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092674] CPU: Testing write buffer coherency: ok
[ 0.093022] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093082] Setting up static identity map for 0x4c4b00 - 0x4c4b58
[ 0.093306] L310 cache controller enabled
[ 0.093326] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.171041] CPU1: Booted secondary processor
[ 0.260232] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260366] Brought up 2 CPUs
[ 0.260385] SMP: Total of 2 processors activated.
[ 0.260393] CPU: All CPU(s) started in SVC mode.
[ 0.261063] devtmpfs: initialized
[ 0.263490] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264747] regulator-dummy: no parameters
[ 0.273730] NET: Registered protocol family 16
[ 0.276001] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.278322] cpuidle: using governor ladder
[ 0.278336] cpuidle: using governor menu
[ 0.285913] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.287469] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.287483] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.287604] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.309805] bio: create slab <bio-0> at 0
[ 0.311442] vgaarb: loaded
[ 0.312158] SCSI subsystem initialized
[ 0.313059] usbcore: registered new interface driver usbfs
[ 0.313234] usbcore: registered new interface driver hub
[ 0.313472] usbcore: registered new device driver usb
[ 0.314005] media: Linux media interface: v0.10
[ 0.314162] Linux video capture interface: v2.00
[ 0.314405] pps_core: LinuxPPS API ver. 1 registered
[ 0.314417] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.314544] PTP clock support registered
[ 0.314930] EDAC MC: Ver: 3.0.0
[ 0.316021] Advanced Linux Sound Architecture Driver Initialized.
[ 0.319024] DMA-API: preallocated 4096 debug entries
[ 0.319038] DMA-API: debugging enabled by kernel config
[ 0.319132] Switched to clocksource arm_global_timer
[ 0.341107] NET: Registered protocol family 2
[ 0.341775] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.341833] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.341918] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.341967] TCP: reno registered
[ 0.341985] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.342020] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.342259] NET: Registered protocol family 1
[ 0.342629] RPC: Registered named UNIX socket transport module.
[ 0.342643] RPC: Registered udp transport module.
[ 0.342651] RPC: Registered tcp transport module.
[ 0.342659] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.342672] PCI: CLS 0 bytes, default 64
[ 0.343121] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.345192] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.347380] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.347575] msgmni has been set to 967
[ 0.348372] io scheduler noop registered
[ 0.348385] io scheduler deadline registered
[ 0.348424] io scheduler cfq registered (default)
[ 0.359019] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.359039] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.486561] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.054888] console [ttyPS0] enabled
[ 1.059220] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.066876] [drm] Initialized drm 1.1.0 20060810
[ 1.083952] brd: module loaded
[ 1.093452] loop: module loaded
[ 1.103008] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.108756] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.116740] libphy: XEMACPS mii bus: probed
[ 1.121365] ------------- phy_id = 0x3625e62
[ 1.126132] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.134916] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.141582] ehci-pci: EHCI PCI platform driver
[ 1.148817] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.155652] usbcore: registered new interface driver usb-storage
[ 1.162524] mousedev: PS/2 mouse device common for all mice
[ 1.168651] i2c /dev entries driver
[ 1.175640] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.181186] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.187084] Xilinx Zynq CpuIdle Driver started
[ 1.191986] sdhci: Secure Digital Host Controller Interface driver
[ 1.198080] sdhci: Copyright(c) Pierre Ossman
[ 1.202445] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.209302] mmc0: no vqmmc regulator found
[ 1.213318] mmc0: no vmmc regulator found
[ 1.249151] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.257848] usbcore: registered new interface driver usbhid
[ 1.263362] usbhid: USB HID core driver
[ 1.268099] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.274398] nand: Micron MT29F2G08ABAEAWP
[ 1.278366] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.284313] Bad block table found at page 131008, version 0x01
[ 1.290532] Bad block table found at page 130944, version 0x01
[ 1.296592] 3 ofpart partitions found on MTD device pl353-nand
[ 1.302373] Creating 3 MTD partitions on "pl353-nand":
[ 1.307465] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.315542] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.322866] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.331883] TCP: cubic registered
[ 1.335117] NET: Registered protocol family 17
[ 1.339843] Registering SWP/SWPB emulation handler
[ 1.345756] regulator-dummy: disabling
[ 1.350138] UBI: attaching mtd1 to ubi0
[ 1.875911] UBI: scanning is finished
[ 1.887546] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.894630] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.901391] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.908055] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.914933] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.920913] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.928021] UBI: max/mean erase counter: 18/9, WL threshold: 4096, image sequence number: 1134783803
[ 1.937151] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.946366] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.946372] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.950462] ALSA device list:
[ 1.950466] No soundcards found.
[ 1.966812] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 2.024503] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.030464] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.039568] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.049539] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.054515] UBIFS: media format: w4/r0 (latest is w4/r0), UUID B079DD56-06BB-4E31-8F5E-A6604F480DB2, small LPT model
[ 2.066061] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.073493] devtmpfs: mounted
[ 2.076599] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.919849] random: dd urandom read with 0 bits of entropy available
[ 3.319172]
[ 3.319172] bcm54xx_config_init
[ 3.929173]
[ 3.929173] bcm54xx_config_init
[ 6.930001] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 6.936092] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 20.293370] In axi fpga driver!
[ 20.296442] request_mem_region OK!
[ 20.299871] AXI fpga dev virtual address is 0xdf9fc000
[ 20.304946] *base_vir_addr = 0x8c510
[ 20.320795] In fpga mem driver!
[ 20.323861] request_mem_region OK!
[ 20.327434] fpga mem virtual address is 0xe2000000
[ 21.128496]
[ 21.128496] bcm54xx_config_init
[ 21.758424]
[ 21.758424] bcm54xx_config_init
[ 24.758955] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[ 24.764980] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[ 718.635683] random: nonblocking pool is initialized
This is XILINX board. Totalram: 507527168
Detect 512MB control board of XILINX
DETECT HW version=0008c510
miner ID : 80706dcc68808814
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[5] has freq in PIC and will jump over...
Chain[5] has core num in PIC
Chain[5] ASIC[2] has core num=1
Chain[5] ASIC[9] has core num=15
Chain[5] ASIC[16] has core num=7
Chain[5] ASIC[19] has core num=2
Chain[5] ASIC[28] has core num=15
Chain[5] ASIC[29] has core num=15
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[6] has freq in PIC and will jump over...
Chain[6] has core num in PIC
Chain[6] ASIC[11] has core num=3
Chain[6] ASIC[17] has core num=3
Chain[6] ASIC[32] has core num=1
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
has freq in PIC, will disable freq setting.
chain[7] has freq in PIC and will jump over...
Chain[7] has core num in PIC
Chain[7] ASIC[3] has core num=15
Chain[7] ASIC[17] has core num=3
Chain[7] ASIC[51] has core num=15
Check chain[7] PIC fw version=0x03
get PIC voltage=91 on chain[5], value=890
get PIC voltage=91 on chain[6], value=890
get PIC voltage=91 on chain[7], value=890
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL
--- check asic number
After Get ASIC NUM CRC error counter=0
set_baud=0
The min freq=700
set real timeout 52, need sleep=379392
After TEST CRC error counter=0
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
search freq for 1 times, completed chain = 3, total chain num = 3
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
restart Miner chance num=2
waiting for receive_func to exit!
waiting for pic heart to exit!
bmminer not found=24228 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
bmminer not found=24864 root 0:00 grep bmminer
bmminer not found, restart bmminer ...
This is user mode for mining
Detect 512MB control board of XILINX
Miner Type = S9
Miner compile time: Fri Nov 17 17:57:49 CST 2017 type: Antminer S9set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
miner ID : 80706dcc68808814
set_reset_allhashboard = 0x0000ffff
Checking fans!get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[2] speed=4320
get fan[5] speed=5760
get fan[2] speed=4320
get fan[5] speed=5760
get fan[2] speed=4320
get fan[5] speed=5760
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J6] has backup chain_voltage=890
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J7] has backup chain_voltage=890
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Detect: use voltage limit rules on single board!
Detect: S9_63 use voltage level=1 : 1
Chain[J8] has backup chain_voltage=890
Check chain[7] PIC fw version=0x03
Chain[J6] orignal chain_voltage_pic=91 value=890
Chain[J7] orignal chain_voltage_pic=91 value=890
Chain[J8] orignal chain_voltage_pic=91 value=890
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has core num in PIC
Chain[J6] ASIC[2] has core num=1
Chain[J6] ASIC[9] has core num=15
Chain[J6] ASIC[16] has core num=7
Chain[J6] ASIC[19] has core num=2
Chain[J6] ASIC[28] has core num=15
Chain[J6] ASIC[29] has core num=15
Chain[J7] has core num in PIC
Chain[J7] ASIC[11] has core num=3
Chain[J7] ASIC[17] has core num=3
Chain[J7] ASIC[32] has core num=1
Chain[J8] has core num in PIC
Chain[J8] ASIC[3] has core num=15
Chain[J8] ASIC[17] has core num=3
Chain[J8] ASIC[51] has core num=15
miner total rate=13567GH/s fixed rate=13500GH/s
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Asic[28]:662 Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Chain[J6] voltage added=0.0V
Chain:5 temp offset=0
Chain:5 base freq=662
Asic[ 0]:662
Asic[ 1]:662 Asic[ 2]:662 Asic[ 3]:662 Asic[ 4]:662 Asic[ 5]:662 Asic[ 6]:662 Asic[ 7]:662 Asic[ 8]:662
Detect a bad chip=9 on chain[5], fixed to 400M
Asic[ 9]:662 Asic[10]:662 Asic[11]:662 Asic[12]:662 Asic[13]:662 Asic[14]:662 Asic[15]:662 Asic[16]:662
Asic[17]:662 Asic[18]:662 Asic[19]:662 Asic[20]:662 Asic[21]:662 Asic[22]:662 Asic[23]:662 Asic[24]:662
Asic[25]:662 Asic[26]:662 Asic[27]:662 Detect a bad chip=28 on chain[5], fixed to 400M
Asic[28]:662 Detect a bad chip=29 on chain[5], fixed to 400M
Asic[29]:662 Asic[30]:662 Asic[31]:662 Asic[32]:662
Asic[33]:662 Asic[34]:662 Asic[35]:662 Asic[36]:662 Asic[37]:662 Asic[38]:662 Asic[39]:662 Asic[40]:662
Asic[41]:662 Asic[42]:662 Asic[43]:662 Asic[44]:662 Asic[45]:662 Asic[46]:662 Asic[47]:662 Asic[48]:662
Asic[49]:662 Asic[50]:662 Asic[51]:662 Asic[52]:662 Asic[53]:662 Asic[54]:662 Asic[55]:662 Asic[56]:662
Asic[57]:662 Asic[58]:662 Asic[59]:662 Asic[60]:662 Asic[61]:662 Asic[62]:662
Chain:5 max freq=662
Chain:5 min freq=662
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Chain[J7] voltage added=0.0V
Chain:6 temp offset=0
Chain:6 base freq=631
Asic[ 0]:631
Asic[ 1]:631 Asic[ 2]:631 Asic[ 3]:631 Asic[ 4]:631 Asic[ 5]:631 Asic[ 6]:631 Asic[ 7]:631 Asic[ 8]:631
Asic[ 9]:631 Asic[10]:631 Asic[11]:631 Asic[12]:631 Asic[13]:631 Asic[14]:631 Asic[15]:631 Asic[16]:631
Asic[17]:631 Asic[18]:631 Asic[19]:631 Asic[20]:631 Asic[21]:631 Asic[22]:631 Asic[23]:631 Asic[24]:631
Asic[25]:631 Asic[26]:631 Asic[27]:631 Asic[28]:631 Asic[29]:631 Asic[30]:631 Asic[31]:631 Asic[32]:631
Asic[33]:631 Asic[34]:631 Asic[35]:631 Asic[36]:631 Asic[37]:631 Asic[38]:631 Asic[39]:631 Asic[40]:631
Asic[41]:631 Asic[42]:631 Asic[43]:631 Asic[44]:631 Asic[45]:631 Asic[46]:631 Asic[47]:631 Asic[48]:631
Asic[49]:631 Asic[50]:631 Asic[51]:631 Asic[52]:631 Asic[53]:631 Asic[54]:631 Asic[55]:631 Asic[56]:631
Asic[57]:631 Asic[58]:631 Asic[59]:631 Asic[60]:631 Asic[61]:631 Asic[62]:631
Chain:6 max freq=631
Chain:6 min freq=631
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Chain[J8] voltage added=0.0V
Chain:7 temp offset=0
Chain:7 base freq=650
Asic[ 0]:650
Asic[ 1]:650 Asic[ 2]:650 Detect a bad chip=3 on chain[7], fixed to 400M
Asic[ 3]:650 Asic[ 4]:650 Asic[ 5]:650 Asic[ 6]:650 Asic[ 7]:650 Asic[ 8]:650
Asic[ 9]:650 Asic[10]:650 Asic[11]:650 Asic[12]:650 Asic[13]:650 Asic[14]:650 Asic[15]:650 Asic[16]:650
Asic[17]:650 Asic[18]:650 Asic[19]:650 Asic[20]:650 Asic[21]:650 Asic[22]:650 Asic[23]:650 Asic[24]:650
Asic[25]:650 Asic[26]:650 Asic[27]:650 Asic[28]:650 Asic[29]:650 Asic[30]:650 Asic[31]:650 Asic[32]:650
Asic[33]:650 Asic[34]:650 Asic[35]:650 Asic[36]:650 Asic[37]:650 Asic[38]:650 Asic[39]:650 Asic[40]:650
Asic[41]:650 Asic[42]:650 Asic[43]:650 Asic[44]:650 Asic[45]:650 Asic[46]:650 Asic[47]:650 Asic[48]:650
Asic[49]:650 Asic[50]:650 Detect a bad chip=51 on chain[7], fixed to 400M
Asic[51]:650 Asic[52]:650 Asic[53]:650 Asic[54]:650 Asic[55]:650 Asic[56]:650
Asic[57]:650 Asic[58]:650 Asic[59]:650 Asic[60]:650 Asic[61]:650 Asic[62]:650
Chain:7 max freq=650
Chain:7 min freq=650
max freq = 662
set baud=1
Chain[J6] PIC temp offset=62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
Chain[J6] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[5] chip[244] local:54 remote:62 offset:25
Chain[J6] chip[244] get middle temp offset=25 typeID=55
Chain[J7] PIC temp offset=62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
Chain[J7] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[6] chip[244] local:49 remote:55 offset:26
Chain[J7] chip[244] get middle temp offset=26 typeID=55
Chain[J8] PIC temp offset=62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
Chain[J8] chip[244] use PIC middle temp offset=0 typeID=55
New offset Chain[7] chip[244] local:53 remote:58 offset:28
Chain[J8] chip[244] get middle temp offset=28 typeID=55
single board rate=4521 voltage limit=890 on chain[5]
get PIC voltage=890 on chain[5], check: must be < 890
retryFlag=1 will set the voltage limited on chain[5], change voltage=890
now set pic voltage=91 on chain[5]
single board rate=4527 voltage limit=890 on chain[6]
get PIC voltage=890 on chain[6], check: must be < 890
retryFlag=1 will set the voltage limited on chain[6], change voltage=890
now set pic voltage=91 on chain[6]
single board rate=4518 voltage limit=890 on chain[7]
get PIC voltage=890 on chain[7], check: must be < 890
retryFlag=1 will set the voltage limited on chain[7], change voltage=890
now set pic voltage=91 on chain[7]
Chain[J6] set working voltage=890 [91]
Chain[J7] set working voltage=890 [91]
Chain[J8] set working voltage=890 [91]
do heat board 8xPatten for 1 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=662
freq[24]=662 freq[25]=662 freq[26]=662 freq[27]=662 freq[28]=662 freq[29]=662 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=662 freq[36]=662 freq[37]=662 freq[38]=662 freq[39]=662
freq[40]=662 freq[41]=662 freq[42]=662 freq[43]=662 freq[44]=662 freq[45]=662 freq[46]=662 freq[47]=662
freq[48]=662 freq[49]=662 freq[50]=662 freq[51]=662 freq[52]=662 freq[53]=662 freq[54]=662 freq[55]=662
freq[56]=662 freq[57]=662 freq[58]=662 freq[59]=662 freq[60]=662 freq[61]=662 freq[62]=662
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:47959
last_nonce_num:21501
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=911 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[51]=911
core[023]=7
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57455
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25852
last_nonce_num:35729
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=909 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[36]=909
core[085]=5
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57453
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26270
last_nonce_num:28613
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
do heat board 8xPatten for 2 times
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
freq[00]=662 freq[01]=662 freq[02]=662 freq[03]=662 freq[04]=662 freq[05]=662 freq[06]=662 freq[07]=662
freq[08]=662 freq[09]=662 freq[10]=662 freq[11]=662 freq[12]=662 freq[13]=662 freq[14]=662 freq[15]=662
freq[16]=662 freq[17]=662 freq[18]=662 freq[19]=662 freq[20]=662 freq[21]=662 freq[22]=662 freq[23]=662
freq[24]=662 freq[25]=662 freq[26]=662 freq[27]=662 freq[28]=662 freq[29]=662 freq[30]=662 freq[31]=662
freq[32]=662 freq[33]=662 freq[34]=662 freq[35]=662 freq[36]=662 freq[37]=662 freq[38]=662 freq[39]=662
freq[40]=662 freq[41]=662 freq[42]=662 freq[43]=662 freq[44]=662 freq[45]=662 freq[46]=662 freq[47]=662
freq[48]=662 freq[49]=662 freq[50]=662 freq[51]=662 freq[52]=662 freq[53]=662 freq[54]=662 freq[55]=662
freq[56]=662 freq[57]=662 freq[58]=662 freq[59]=662 freq[60]=662 freq[61]=662 freq[62]=662
total valid nonce number:57456
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26619
last_nonce_num:48741
get nonces on chain[6]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=912 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=911 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[51]=911
core[023]=7
freq[00]=631 freq[01]=631 freq[02]=631 freq[03]=631 freq[04]=631 freq[05]=631 freq[06]=631 freq[07]=631
freq[08]=631 freq[09]=631 freq[10]=631 freq[11]=631 freq[12]=631 freq[13]=631 freq[14]=631 freq[15]=631
freq[16]=631 freq[17]=631 freq[18]=631 freq[19]=631 freq[20]=631 freq[21]=631 freq[22]=631 freq[23]=631
freq[24]=631 freq[25]=631 freq[26]=631 freq[27]=631 freq[28]=631 freq[29]=631 freq[30]=631 freq[31]=631
freq[32]=631 freq[33]=631 freq[34]=631 freq[35]=631 freq[36]=631 freq[37]=631 freq[38]=631 freq[39]=631
freq[40]=631 freq[41]=631 freq[42]=631 freq[43]=631 freq[44]=631 freq[45]=631 freq[46]=631 freq[47]=631
freq[48]=631 freq[49]=631 freq[50]=631 freq[51]=631 freq[52]=631 freq[53]=631 freq[54]=631 freq[55]=631
freq[56]=631 freq[57]=631 freq[58]=631 freq[59]=631 freq[60]=631 freq[61]=631 freq[62]=631
total valid nonce number:57455
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:25846
last_nonce_num:48738
get nonces on chain[7]
require nonce number:912
require validnonce number:57456
asic[00]=912 asic[01]=912 asic[02]=912 asic[03]=912 asic[04]=912 asic[05]=912 asic[06]=912 asic[07]=912
asic[08]=912 asic[09]=912 asic[10]=912 asic[11]=912 asic[12]=912 asic[13]=912 asic[14]=912 asic[15]=912
asic[16]=912 asic[17]=912 asic[18]=912 asic[19]=912 asic[20]=912 asic[21]=912 asic[22]=912 asic[23]=912
asic[24]=912 asic[25]=912 asic[26]=912 asic[27]=912 asic[28]=912 asic[29]=912 asic[30]=912 asic[31]=912
asic[32]=912 asic[33]=912 asic[34]=912 asic[35]=912 asic[36]=910 asic[37]=912 asic[38]=912 asic[39]=912
asic[40]=912 asic[41]=912 asic[42]=912 asic[43]=912 asic[44]=912 asic[45]=912 asic[46]=912 asic[47]=912
asic[48]=912 asic[49]=912 asic[50]=912 asic[51]=912 asic[52]=912 asic[53]=912 asic[54]=912 asic[55]=912
asic[56]=912 asic[57]=912 asic[58]=912 asic[59]=912 asic[60]=912 asic[61]=912 asic[62]=912
Below ASIC's core didn't receive all the nonce, they should receive 8 nonce each!
asic[36]=910
core[085]=6
freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650
total valid nonce number:57454
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:26261
last_nonce_num:55860
chain[5]: All chip cores are opened OK!
Test Patten on chain[5]: OK!
chain[6]: All chip cores are opened OK!
Test Patten on chain[6]: FAILED!
chain[7]: All chip cores are opened OK!
Test Patten on chain[7]: FAILED!
setStartTimePoint total_tv_start_sys=70472 total_tv_end_sys=70473
restartNum = 2 , auto-reinit enabled...
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
Fatal Error: network connection lost!
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
get RT hashrate from Chain[6]: (asic index start from 1-63)
get RT hashrate from Chain[7]: (asic index start from 1-63)
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=25
read failed, old value: Chain[5] Chip[62] local Temp=61
read failed on Chain[5] Chip[62] middle Temp old value:76
Special fix Chain[5] Chip[62] middle Temp = 76
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=26
read failed, old value: Chain[6] Chip[62] local Temp=56
read failed on Chain[6] Chip[62] middle Temp old value:71
Special fix Chain[6] Chip[62] middle Temp = 71
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=28
read failed, old value: Chain[7] Chip[62] local Temp=59
read failed on Chain[7] Chip[62] middle Temp old value:74
Special fix Chain[7] Chip[62] middle Temp = 74
Done read temp on Chain[7]
Set fixed full fan speed
FAN PWM: 100
read_temp_func Done!
CRC error counter=0
|
