Hi,
I'm having some issue with 2 Antminers I bought.
I running them with:
Windows 7
12v3A usb 2.0 hub
Recommend CGMiner from
http://github/AntMiner/AntGen1/tree/master/cgminerLoaded the CP2012 Driver
Ran Zadig per user guide
I seem to have two problems:1. Only 1 Antminer is seen by CGMiner.
http://i40.tinypic.com/2gwrrt3.png However when I type CGMiner -n it says it finds 2 devices:
http://i40.tinypic.com/2qwcruw.pngHere is my command line: cgminer.exe --usb 8:4 --bmsc-options 115200:20 -o stratum.btcguild.com:3333 -u Plotus_1 -p123 --bmsc-freq 0781
CGminer does not find the Antminers unless I use the --usb. If I don't use that then CGMiner crashes with no errors. This is what I see:
http://i43.tinypic.com/6ohidl.pngA couple of things I have tried.
I know that each Antminers work by switching between the USB address. I just can't get them both to work at the same time.
I have tried starting cgminer with one miner plugged in, while it runs fine, I plug the second one it but it doesn't find it.
I downloaded BFGMiner 3.10 and it doesn't see them at all (No devices found)
I've restarted my computer several times.
Zading shows two CP2102 USB to UART Bridge Controller in the drop down. That doesn't seem right to me though...
My thoughts are it has something to do with the usb bus. Maybe it's duplicated if that makes sense?
2. My second issues is when I over-clock one. CGMiner times out on the golden nonce. When I lower back down to 0781 it doesn't have an issue. Is that USB hub related?
Any ideas are most welcome!