Amigo metete en system- kernel log copi y pega lo que te dice al final cuando te da ese error para ver que puede estar pasando
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Xilinx Zynq
[ 0.000000] cma: CMA: reserved 128 MiB at 16800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 126976
[ 0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 126976 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[ 0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 125984
[ 0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xdf800000 - 0xff000000 ( 504 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc06d1374 (6949 kB)
[ 0.000000] .init : 0xc06d2000 - 0xc0705380 ( 205 kB)
[ 0.000000] .data : 0xc0706000 - 0xc074cf78 ( 284 kB)
[ 0.000000] .bss : 0xc074cf84 - 0xc078d9fc ( 259 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] ps7-slcr mapped to df802000
[ 0.000000] zynq_clock_init: clkc starts at df802100
[ 0.000000] Zynq clock init
[ 0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[ 0.000305] ps7-ttc #0 at df804000, irq=43
[ 0.000614] Console: colour dummy device 80x30
[ 0.000646] Calibrating delay loop... 1332.01 BogoMIPS (lpj=6660096)
[ 0.090251] pid_max: default: 32768 minimum: 301
[ 0.090469] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090489] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.092645] CPU: Testing write buffer coherency: ok
[ 0.092983] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.093043] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[ 0.093266] L310 cache controller enabled
[ 0.093286] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[ 0.171033] CPU1: Booted secondary processor
[ 0.260226] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.260356] Brought up 2 CPUs
[ 0.260375] SMP: Total of 2 processors activated.
[ 0.260384] CPU: All CPU(s) started in SVC mode.
[ 0.261046] devtmpfs: initialized
[ 0.263465] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.264677] regulator-dummy: no parameters
[ 0.271933] NET: Registered protocol family 16
[ 0.274232] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.276524] cpuidle: using governor ladder
[ 0.276538] cpuidle: using governor menu
[ 0.283891] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[ 0.285406] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.285420] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.285534] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[ 0.307155] bio: create slab <bio-0> at 0
[ 0.308582] vgaarb: loaded
[ 0.309276] SCSI subsystem initialized
[ 0.310170] usbcore: registered new interface driver usbfs
[ 0.311021] usbcore: registered new interface driver hub
[ 0.311414] usbcore: registered new device driver usb
[ 0.311938] media: Linux media interface: v0.10
[ 0.312093] Linux video capture interface: v2.00
[ 0.312333] pps_core: LinuxPPS API ver. 1 registered
[ 0.312345] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.312467] PTP clock support registered
[ 0.312829] EDAC MC: Ver: 3.0.0
[ 0.313868] Advanced Linux Sound Architecture Driver Initialized.
[ 0.316707] DMA-API: preallocated 4096 debug entries
[ 0.316721] DMA-API: debugging enabled by kernel config
[ 0.316795] Switched to clocksource arm_global_timer
[ 0.336701] NET: Registered protocol family 2
[ 0.337510] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.337568] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.337654] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.337699] TCP: reno registered
[ 0.337716] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337747] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.337997] NET: Registered protocol family 1
[ 0.338306] RPC: Registered named UNIX socket transport module.
[ 0.338317] RPC: Registered udp transport module.
[ 0.338326] RPC: Registered tcp transport module.
[ 0.338334] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.338347] PCI: CLS 0 bytes, default 64
[ 0.338791] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.340802] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.342922] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 0.343109] msgmni has been set to 967
[ 0.343895] io scheduler noop registered
[ 0.343908] io scheduler deadline registered
[ 0.343944] io scheduler cfq registered (default)
[ 0.353602] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[ 0.353622] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[ 0.477327] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[ 1.045348] console [ttyPS0] enabled
[ 1.049622] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[ 1.057279] [drm] Initialized drm 1.1.0 20060810
[ 1.074200] brd: module loaded
[ 1.083602] loop: module loaded
[ 1.092920] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 1.098910] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 1.106611] libphy: XEMACPS mii bus: probed
[ 1.111005] ------------- phy_id = 0x3625e62
[ 1.115760] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[ 1.124316] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.130980] ehci-pci: EHCI PCI platform driver
[ 1.138213] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[ 1.145016] usbcore: registered new interface driver usb-storage
[ 1.151891] mousedev: PS/2 mouse device common for all mice
[ 1.158094] i2c /dev entries driver
[ 1.164979] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[ 1.170496] cpufreq_cpu0: failed to get cpu0 regulator: -19
[ 1.176376] Xilinx Zynq CpuIdle Driver started
[ 1.181251] sdhci: Secure Digital Host Controller Interface driver
[ 1.187438] sdhci: Copyright(c) Pierre Ossman
[ 1.191710] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.198529] mmc0: no vqmmc regulator found
[ 1.202546] mmc0: no vmmc regulator found
[ 1.246821] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[ 1.257530] usbcore: registered new interface driver usbhid
[ 1.263015] usbhid: USB HID core driver
[ 1.267770] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[ 1.274041] nand: Micron MT29F2G08ABAEAWP
[ 1.278088] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[ 1.283962] Bad block table found at page 131008, version 0x01
[ 1.290190] Bad block table found at page 130944, version 0x01
[ 1.296248] 3 ofpart partitions found on MTD device pl353-nand
[ 1.302046] Creating 3 MTD partitions on "pl353-nand":
[ 1.307149] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[ 1.315182] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[ 1.322514] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[ 1.331487] TCP: cubic registered
[ 1.334725] NET: Registered protocol family 17
[ 1.339451] Registering SWP/SWPB emulation handler
[ 1.345329] regulator-dummy: disabling
[ 1.349676] UBI: attaching mtd1 to ubi0
[ 1.875303] UBI: scanning is finished
[ 1.886932] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[ 1.893985] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.900783] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.907464] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.914295] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[ 1.920308] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 1.927419] UBI: max/mean erase counter: 228/128, WL threshold: 4096, image sequence number: 767909345
[ 1.936691] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[ 1.945924] UBI: background thread "ubi_bgt0d" started, PID 1080
[ 1.945930] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 1.949894] ALSA device list:
[ 1.949898] No soundcards found.
[ 1.966263] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[ 1.995384] UBIFS: recovery needed
[ 2.066161] UBIFS: recovery completed
[ 2.069831] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 2.075756] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 2.084890] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[ 2.094781] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 2.099816] UBIFS: media format: w4/r0 (latest is w4/r0), UUID F4300A22-CCD3-41F9-98C8-CD0E0F28FD62, small LPT model
[ 2.111338] VFS: Mounted root (ubifs filesystem) on device 0:11.
[ 2.118769] devtmpfs: mounted
[ 2.121877] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[ 2.968916] random: dd urandom read with 0 bits of entropy available
[ 3.356831]
[ 3.356831] bcm54xx_config_init
[ 3.966841]
[ 3.966841] bcm54xx_config_init
[ 7.967660] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 7.973769] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
[ 25.708524] In axi fpga driver!
[ 25.711593] request_mem_region OK!
[ 25.714984] AXI fpga dev virtual address is 0xdf9fc000
[ 25.720119] *base_vir_addr = 0x8c510
[ 25.734858] In fpga mem driver!
[ 25.738421] request_mem_region OK!
[ 25.741926] fpga mem virtual address is 0xe2000000
[ 26.506817]
[ 26.506817] bcm54xx_config_init
[ 27.136843]
[ 27.136843] bcm54xx_config_init
[ 31.137668] xemacps e000b000.ps7-ethernet: Set clk to 124999998 Hz
[ 31.143777] xemacps e000b000.ps7-ethernet: link up (1000/FULL)
Detect 512MB control board of XILINX
Miner Type = S9
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
Fix freq=550 Chain[5] voltage_pic=6 value=940
Fix freq=550 Chain[6] voltage_pic=6 value=940
Fix freq=550 Chain[7] voltage_pic=6 value=940
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
Chain[J6] has 63 asic
Chain[J7] has 63 asic
Chain[J8] has 63 asic
Chain[J6] has no freq in PIC, set default freq=550M
Chain[J6] has no core num in PIC
Chain[J7] has no freq in PIC, set default freq=550M
Chain[J7] has no core num in PIC
Chain[J8] has no freq in PIC, set default freq=550M
Chain[J8] has no core num in PIC
Miner fix freq ...
read PIC voltage=940 on chain[5]
Chain:5 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:5 max freq=550
Chain:5 min freq=550
read PIC voltage=940 on chain[6]
Chain:6 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:6 max freq=550
Chain:6 min freq=550
read PIC voltage=940 on chain[7]
Chain:7 chipnum=63
Asic[ 0]:550
Asic[ 1]:550 Asic[ 2]:550 Asic[ 3]:550 Asic[ 4]:550 Asic[ 5]:550 Asic[ 6]:550 Asic[ 7]:550 Asic[ 8]:550
Asic[ 9]:550 Asic[10]:550 Asic[11]:550 Asic[12]:550 Asic[13]:550 Asic[14]:550 Asic[15]:550 Asic[16]:550
Asic[17]:550 Asic[18]:550 Asic[19]:550 Asic[20]:550 Asic[21]:550 Asic[22]:550 Asic[23]:550 Asic[24]:550
Asic[25]:550 Asic[26]:550 Asic[27]:550 Asic[28]:550 Asic[29]:550 Asic[30]:550 Asic[31]:550 Asic[32]:550
Asic[33]:550 Asic[34]:550 Asic[35]:550 Asic[36]:550 Asic[37]:550 Asic[38]:550 Asic[39]:550 Asic[40]:550
Asic[41]:550 Asic[42]:550 Asic[43]:550 Asic[44]:550 Asic[45]:550 Asic[46]:550 Asic[47]:550 Asic[48]:550
Asic[49]:550 Asic[50]:550 Asic[51]:550 Asic[52]:550 Asic[53]:550 Asic[54]:550 Asic[55]:550 Asic[56]:550
Asic[57]:550 Asic[58]:550 Asic[59]:550 Asic[60]:550 Asic[61]:550 Asic[62]:550
Chain:7 max freq=550
Chain:7 min freq=550
max freq = 550
set baud=2
Chain[J6] PIC temp offset=62,2,0,0,0,0,0,0
Chain[J6] chip[244] use PIC middle temp offset=2 typeID=55
New offset Chain[5] chip[244] local:33 remote:32 offset:31
Chain[J6] chip[244] get middle temp offset=31 typeID=55
Chain[J7] PIC temp offset=62,67,0,0,0,0,0,0
Chain[J7] chip[244] use PIC middle temp offset=67 typeID=55
New offset Chain[6] chip[244] local:33 remote:31 offset:32
Chain[J7] chip[244] get middle temp offset=32 typeID=55
Chain[J8] PIC temp offset=62,67,0,0,0,0,0,0
Chain[J8] chip[244] use PIC middle temp offset=67 typeID=55
New offset Chain[7] chip[244] local:33 remote:31 offset:32
Chain[J8] chip[244] get middle temp offset=32 typeID=55
Chain[J6] set working voltage=940 [6]
Chain[J7] set working voltage=940 [6]
Chain[J8] set working voltage=940 [6]
setStartTimePoint total_tv_start_sys=64 total_tv_end_sys=65
restartNum = 2 , auto-reinit enabled...
do read_temp_func once...
do check_asic_reg 0x08
get RT hashrate from Chain[5]: (asic index start from 1-63)
Asic[01]=64.0720 Asic[02]=59.7430 Asic[03]=64.1560 Asic[04]=63.5520 Asic[05]=61.9910 Asic[06]=64.6250 Asic[07]=64.9270 Asic[08]=56.7060
Asic[09]=61.1020 Asic[10]=58.8200 Asic[11]=59.8270 Asic[12]=58.4350 Asic[13]=61.8910 Asic[14]=62.3270 Asic[15]=58.0820 Asic[16]=64.1720
Asic[17]=60.4480 Asic[18]=64.2730 Asic[19]=64.1050 Asic[20]=65.4980 Asic[21]=65.4640 Asic[22]=60.3470 Asic[23]=61.0850 Asic[24]=68.3000
Asic[25]=61.6220 Asic[26]=60.8670 Asic[27]=67.6280 Asic[28]=62.5950 Asic[29]=62.4440 Asic[30]=69.7260 Asic[31]=60.6660 Asic[32]=56.9080
Asic[33]=63.2330 Asic[34]=60.2970 Asic[35]=65.0950 Asic[36]=64.1220 Asic[37]=57.4280 Asic[38]=59.5420 Asic[39]=63.2500 Asic[40]=62.5620
Asic[41]=62.8640 Asic[42]=62.5950 Asic[43]=63.9210 Asic[44]=61.2870 Asic[45]=64.3900 Asic[46]=62.2260 Asic[47]=60.4480 Asic[48]=64.7760
Asic[49]=61.5220 Asic[50]=58.5860 Asic[51]=65.8670 Asic[52]=61.1360 Asic[53]=57.3780 Asic[54]=60.1790 Asic[55]=59.8270 Asic[56]=64.0050
Asic[57]=62.0580 Asic[58]=70.0780 Asic[59]=65.6490 Asic[60]=58.5020 Asic[61]=58.5350 Asic[62]=57.8810 Asic[63]=60.2460
get RT hashrate from Chain[6]: (asic index start from 1-63)
Asic[01]=66.1520 Asic[02]=61.5220 Asic[03]=60.6160 Asic[04]=61.3710 Asic[05]=60.2800 Asic[06]=63.9040 Asic[07]=60.3810 Asic[08]=61.1520
Asic[09]=61.6390 Asic[10]=61.4540 Asic[11]=64.5580 Asic[12]=61.8740 Asic[13]=60.5150 Asic[14]=60.8840 Asic[15]=62.4440 Asic[16]=59.7430
Asic[17]=60.9180 Asic[18]=60.4140 Asic[19]=63.7360 Asic[20]=66.9570 Asic[21]=61.4540 Asic[22]=58.7530 Asic[23]=61.0010 Asic[24]=63.9540
Asic[25]=64.6090 Asic[26]=62.0750 Asic[27]=62.2930 Asic[28]=62.0750 Asic[29]=64.2060 Asic[30]=62.6620 Asic[31]=65.1960 Asic[32]=64.2390
Asic[33]=62.3770 Asic[34]=66.0350 Asic[35]=62.6960 Asic[36]=58.6190 Asic[37]=64.3740 Asic[38]=61.2200 Asic[39]=63.6190 Asic[40]=63.1320
Asic[41]=60.6160 Asic[42]=59.9950 Asic[43]=60.8000 Asic[44]=65.0280 Asic[45]=64.7430 Asic[46]=69.0880 Asic[47]=63.2330 Asic[48]=63.1990
Asic[49]=63.3840 Asic[50]=57.1590 Asic[51]=63.8030 Asic[52]=64.1390 Asic[53]=62.8810 Asic[54]=65.2630 Asic[55]=61.5720 Asic[56]=65.1450
Asic[57]=69.2220 Asic[58]=63.5680 Asic[59]=62.0580 Asic[60]=59.8270 Asic[61]=64.8940 Asic[62]=62.4950 Asic[63]=58.5180
get RT hashrate from Chain[7]: (asic index start from 1-63)
Asic[01]=59.0390 Asic[02]=60.4650 Asic[03]=61.4710 Asic[04]=58.3510 Asic[05]=66.9570 Asic[06]=64.8100 Asic[07]=61.5550 Asic[08]=63.5180
Asic[09]=62.4440 Asic[10]=63.8370 Asic[11]=66.4200 Asic[12]=62.4950 Asic[13]=66.8230 Asic[14]=56.4380 Asic[15]=58.7530 Asic[16]=69.9440
Asic[17]=64.9110 Asic[18]=62.5110 Asic[19]=59.5920 Asic[20]=58.9550 Asic[21]=64.8270 Asic[22]=62.1590 Asic[23]=60.5150 Asic[24]=66.5380
Asic[25]=64.6590 Asic[26]=61.8570 Asic[27]=59.2730 Asic[28]=64.7600 Asic[29]=68.8360 Asic[30]=63.2830 Asic[31]=65.2630 Asic[32]=62.8810
Asic[33]=64.5750 Asic[34]=62.9140 Asic[35]=66.4370 Asic[36]=65.4470 Asic[37]=61.3370 Asic[38]=57.5120 Asic[39]=69.4570 Asic[40]=63.7530
Asic[41]=62.6120 Asic[42]=61.8570 Asic[43]=59.5250 Asic[44]=69.9270 Asic[45]=60.9850 Asic[46]=57.9980 Asic[47]=60.1120 Asic[48]=62.5620
Asic[49]=68.4340 Asic[50]=59.1060 Asic[51]=62.7130 Asic[52]=65.9680 Asic[53]=62.9640 Asic[54]=65.8000 Asic[55]=58.0150 Asic[56]=60.5650
Asic[57]=69.0550 Asic[58]=64.8100 Asic[59]=62.0420 Asic[60]=61.7560 Asic[61]=64.7430 Asic[62]=59.9950 Asic[63]=60.7830
Check Chain[J6] ASIC RT error: (asic index start from 1-63)
Check Chain[J7] ASIC RT error: (asic index start from 1-63)
Check Chain[J8] ASIC RT error: (asic index start from 1-63)
Done check_asic_reg
do read temp on Chain[5]
Chain[5] Chip[62] TempTypeID=55 middle offset=31
Chain[5] Chip[62] local Temp=74
Chain[5] Chip[62] middle Temp=59
Done read temp on Chain[5]
do read temp on Chain[6]
Chain[6] Chip[62] TempTypeID=55 middle offset=32
Chain[6] Chip[62] local Temp=72
Chain[6] Chip[62] middle Temp=55
Done read temp on Chain[6]
do read temp on Chain[7]
Chain[7] Chip[62] TempTypeID=55 middle offset=32
Chain[7] Chip[62] local Temp=72
Chain[7] Chip[62] middle Temp=52
Done read temp on Chain[7]
set FAN speed according to: temp_highest=59 temp_top1[PWM_T]=59 temp_top1[TEMP_POS_LOCAL]=74 temp_change=5 fix_fan_steps=0
set normal FAN speed...with fix_fan_steps=0
FAN PWM: 38
read_temp_func Done!
CRC error counter=0
