Gigabyte 1060 6GB P106-100 best MSI afterburn settings.

[cryptominingnl]

Hi Guys,

I have two rigs with 6x Gigabyte 1060 6GB P106-100 cards.
I rund at 140-142mh with each miner when mine ETH.
I see many video's on the internet with people who are runnning 145-150mh each rig.
My question, have anyone done this before?

And what are the best MSI afterburn settings for this?

My current settings:
Power limit: 80
Temp. Limit: 83
Core Clock (MHz): +0
Memory Clock (MHz): +500
Fan Speed: 70

[Saphire]

You can add some core clock to get better hashrates.
And also it is important which brand memories on your graphic cards it also effect the hashrate.
And the miner program also effects some which program do you use?

[cryptominingnl]

You can add some core clock to get better hashrates.
And also it is important which brand memories on your graphic cards it also effect the hashrate.
And the miner program also effects some which program do you use?

I use claymore for mining ETH.
I see few movies on youtube that people push this cards to 25mh per card or even more.

[CryptoAllDay]

Your settings look good to me, I used similar on my Nvidia rig setup.  Nice sizeable but safe overclock on the memory while leaving the core alone and capping power limit.  I'm guessing you are mining algorithms that are memory-dependent.  What temps and hashrates are you hitting with what type of power pull from the wall outlet?

[cryptominingnl]

Your settings look good to me, I used similar on my Nvidia rig setup.  Nice sizeable but safe overclock on the memory while leaving the core alone and capping power limit.  I'm guessing you are mining algorithms that are memory-dependent.  What temps and hashrates are you hitting with what type of power pull from the wall outlet?

640watt per rig, i want to clock each rig to 150mh i saw many video's about this on youtube but I dont know how safe this is.

[sxemini]

lower powertune to 70 or 65, it save some watt. raise the mem clock to +800 - +1000 and you will see 150mh on the rig.

[cryptominingnl]

lower powertune to 70 or 65, it save some watt. raise the mem clock to +800 - +1000 and you will see 150mh on the rig.

Thanks I will try this asap
You also running 1060 cards?

[slackovic]

As someone already told you, the max. hashrate per card you can get greatly depends on the memory brand of the cards. I have one GTX1060 6GB with Samsung memory and I'm getting almost 25 MH/s. On another GTX1060 6GB with Hynix memory I get a little over 21 MH/s.

But you can increase the memory clock until you see rejected shares. Some of my card run even on +1000 MHz memory clock.

[crairezx20]

I experienced different hashrate with different memory type.
My rig has different card 1 of them is hynix 3gb but the hashrate is around 15-16mh/s for my 1060 6gb hynix can get around 21-22mh/s for my 1060 6gb samsung memory can get around 23-25mh/s with 500 memclock.

Did you try to underclock with MSI and maybe you can increase the hashrate and reach 25mh/s but underclock to me not work but you can try and maybe it might work.

[cryptominingnl]

lower powertune to 70 or 65, it save some watt. raise the mem clock to +800 - +1000 and you will see 150mh on the rig.

I try to put this settings to my Afterburn, after savind the settings i get imidiatly errors that i put illegal settings, maybe i had to close first my claymore mining tool before i put my settings?