Hi I am gauging interest in a completely custom R9 290X -6 GPU mining rig. - See Pics Below
All the work and setup has been done for you already!
It contains:(1) Custom Built aluminum frame open air case which holds the motherboard, 2 power supplies
and 6 graphics cards. It also has additional Rails to hold any Hard Drive, as well as additional
rails in the back of the rig that can hold a 20" standard Box Fan.
(6) R9 290X XFX GPU's
(1) Asrock H81 Pro BTC motherboard - 8GB RAM
(1) Intel Pentium Processor G3220 LGA1150
(6) Powered Risers - 5 are ribbon ones and 1 is a USB one. (I have the additional ribbon one if
you want that instead of the USB one)
(2) Corsair AX1200i PSU's
(1) DVD Drive Read/Write (side mounted)
(1) SSD 128GB Running Windows 8.1 Pro, with Add on Bracket for a mounted hard drive
(1) Add on Bracket in the back on the custom case that holds a 20" Box Fan
(1) Pack of Motherboard Header Cables with buttons for power and reset, leds...etc. - no
screwdriver needed to short power pins to power on or reset the motherboard
Rig has been running for a few weeks now at around 5.4MH/s consistently NOT Overclocked
It can be moved around very easily as it is a self contained unit.
I will remove the GPU's from the case and put back in their original store bought boxes with all
original packaging so they do not get damaged during shipping.
The PSU's can be removed as well or left in place, the choice is yours.
I think leaving the Motherboard and PSU's in place is not an issue and will be a quicker setup for
you once you receive it to get up and running right away.
It will most likely be shipped in a large enough box with sufficient padding so the case does not
have to be disassembled as it took a bit of time to put together (even following the directions)
Asking $8,500 OBO for the whole shebang + shipping. - BTC Accepted
