Asrock H110 pro btc+ doesn't show display after inputting the 10th GPU

[leonair]

To those who experienced and resolved this please help me.

I already set at my bios that my Onboard Integrated graphics will be the default display, it was all fine until I inputted my 10th GPU on any GPU slot and it will boot up and show display if I remove and have 9 GPU socketed.

Any thoughts about this or should I install something?

[forato]

To those who experienced and resolved this please help me.

I already set at my bios that my Onboard Integrated graphics will be the default display, it was all fine until I inputted my 10th GPU on any GPU slot and it will boot up and show display if I remove and have 9 GPU socketed.

Any thoughts about this or should I install something?

try to use 9 GPU changing one GPU and puting the GPU that makes. the video did not work (to be sure that the problem is not riser or GPU).

[miner29]

Make sure you have your bios set properly:


    set VTd INTEL VIRTUALIZATION to DISABLE.
    set ONBOARD AUDIO/SOUND (AZALIA) to DISABLE.
    set IEEE1394 to DISABLE.
    set PCI-E SUBSYSTEM/LANES to x8/x4/x4
    set ONBOARD GRAPHICS to DISABLE.
    set PCI-E GENERATION to GEN2.
    set CPU FREQUENCY SCALING to DISABLE.
    set CPU PERFORMANCE MODE to ENABLE.
    set FAST BOOT to DISABLE.
    set CSM to ENABLE.

[Samayuki]

Do you know that you can switch your windows OS to LInUX OS and make all that headache disappeared? I suggest you start from there, Linux supports more graphics cards in mining rigs more than windows OS, try this now and drop your feedback later, have a blessed day.