|
May 31, 2020, 07:22:05 PM |
|
I'm trying to get a rig going with a Z270-A motherboard. If I set up bios correctly and then run one card, it works fine. If I turn it off and then connect 2 cards, the bios resets itself to default and I have to change everything again. Then it works fine. If I connect three cards, again, I have to reset the bios to be configured to 2gen, etc., but all three cards hash correctly. With four cards, all I get is a blinking light in the upper left-hand corner. I'm using Hive OS.
With zero cards connected, I can access the BIOS, but if I connect a USB and SSD, my keyboard will not work, and I can't get into the bios. I was trying this to try and load USB WINDOWS 10 media to an SSD.
Also, when I tried to flash the bios, the mouse would always stick on the DCHP option, so I couldn't check for the latest version.
Any suggestions? These components were working before just fine for two years. I'm trying to set up different cards. I did check to see if memory was supported by Asus, and the one I am using is one letter off. However, it worked okay before.
|