New build and need some help

[heyscotttt]

Hi All, hoping someone can shed some light on this as I'm losing my mind. I am trying to run 4 3070's to mine Eth and just finished new build. When I have 1 GPU connected, after some tweaking I can get it to 55-60 MH/s, but when I connect the other 3 GPU's, I get roughly 10-13 mh/s on each of them.

Here's some screen shots.

https://imgur.com/MVVhn9g with 1 gpu connected.

https://imgur.com/HRUqO4d with 4 gpus

https://imgur.com/0A2tRaa 4 gpu's

https://imgur.com/b3CV5Xn 4 gpu's with overclocks. still only 70 mh/s total.

https://imgur.com/GZqrwJU 2 gpu's with no over clocks..

Edit:
4 GPU's without overclock was getting about 11-12 mh/s or about 1/4 of a single gpu.

Decided to try with 3 cards. Getting about 18ish mh/s without over clocks so essentially 1/3 of the single GPU

and 2 gpu's connected is going 27 mh/s without overclocks.

Any ideas would be greatly appreciated.

[OgNasty]

You'll have a lot more success finding help if you post this in the altcoin mining section.  Beginners won't be able to help you so much and you should get used to posting things in the appropriate section. Good luck!

https://bitcointalk.org/index.php?board=160.0