some errors on my m32s miners

[kiapalang]

hi guys.
i have some M32s .
one of them give me error " 430   Slot0 chip bin type error   "
what is for? all hashboards working well and give me max hashrate

another one give me error "131  Fan out speed error, percent: 99, speed: 0 "
but all fans working well

can someone help me?

[HagssFIN]

Do we have a Whatsminer expert here at Btctalk?

I never got to do any troubleshooting for those.
My strong area is with Avalons and Antminers.

Have you tried contacting the manufacturer? (MicroBT, www.microbt.com )

[kiapalang]

i have avalon too.

these products is so good and never get me tired.

in my country i cant contact manufacturer.

i want to know which part of miner have problem? hashboard?adapter?control board?

[HagssFIN]

Based on the log text, my GUESS would be that you have an issue with the first hash board (in slot0).

The second unit may have something wrong with the control board being broken and unable to detect fan tachometer signal. Can you try that one with a working control board from another miner?

Another explanation might also be that the FANS are not able to SEND their tachometer signal.

[BitMaxz]

Usually for fan intake is on the front of the miner and the exhaust is in the back of the miner according to your error it's an exhaust fan. It gives you no RPM/speed signal.
A miner fan usually has 4 wires

black = ground,
red = Voltage input,
yellow = PWN controller,
blue = RPM/speed signal

So the blue wire might have no connection if you have a multimeter you can check the wire(Without this blue wire it always running at full speed). Resoldering or replacing the wire might solve your issue or completely replace the fan. If it doesn't solve your issue then the culprit is on your control board the socket might have been full of corrosion or rust replacing the fan socket or cleaning it with petrol or lacquer flo thinner might solve this issue.


The hashbord error is related to the chip and maybe it's a program issue on that chip. According to microbt error description logs you need to contact a technician for this error.
About what parts or which hashboard is the slot0 it should be on the left side(Hashbord) not the middle or the right side hashboard.

[kiapalang]

thx to all for respons.

error fan is disapeared for no reason.

Slot1 chip bin type error this error still here but all hashboards still here and working well .

[kiapalang]

another question...
how can i remove miner log or pool log?

[mikeywith]

another question...
how can i remove miner log or pool log?

What do you mean by "remove"? you can clear the log by rebooting the miner, but then it will start filling based on the current status of the miner, the miner logs resets at every reboot, the pool log stays there forever until you reset the miner or/and flash a new firmware.