I have 2 ASICS but am using just one due to heat in the basement as the temperatures outside are starting to get high. The ASIC is in a Silencer box which has 2 heat outlets, the one outlet goes to the duct inlet to emit heat to the window. However with this setup the basement still has a lot of heat. Whats the best way to manage this - See pictures on the links below. The basement has 2 separate small windows the other one is just open to bring in air. The one with the hose is slightly open too just opened the window so the hose can fit in. This is a rental unit so no permanent structural changes.
https://imagetolink.com/ib/cu725NLRK1https://imagetolink.com/ib/nJcRD2l5fxtaller shelf with shorter tube.
also that tube is not ideal if it has no insulation.
https://www.homedepot.com/p/Master-Flow-8-in-x-25-ft-Insulated-Flexible-Duct-R8-Silver-Jacket-F8IFD8X300/202562741the home depot will keep the heat in the tube.
I would want the miner to be on a five or six foot shelf right
under the window. and the tube could be six feet long out the window.
I would also use two or three feet of tube on the intake.
even if the same shelf is used bring in right under the window to shorten the exhaust .
