I'm pretty sure this is correct but I wanted to double check so I don't fry my PSU or any thing connected to it.
I have two cappers/jumpers, what ever you want to call them, to short the PS On pin to a Ground pin, but each connector is using a different pin for the ground connector.
I found this chart on pin-outs on a 24-pin ATX PSU:
http://pinouts.ru/Power/atx_v2_pinout.shtmlBoth of the jumpers appear to be connecting pin 16 to either 18 or 15, which both are grounds.
So I should be good with either one correct?
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fcdn2.aspyr.us%2Fimgs%2Fatxpin1.jpg&t=663&c=NfUnnCzKX7AmLw)
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fcdn2.aspyr.us%2Fimgs%2Fatxpin2.jpg&t=663&c=y_eKkuSil1yz4A)
![](https://ip.bitcointalk.org/?u=http%3A%2F%2Fcdn2.aspyr.us%2Fimgs%2Fatxpin3.jpg&t=663&c=I4UAk4VRfpcwsA)