Buttman's Analcoin | SHA256 | 150K POW | 125% Annual POS | Launched

[presstab]

I didn't realize that these builds required dll's. I have rebuilt the client and it should be static now. Updated binary can be found here https://github.com/presstab/analcoin/releases/tag/v1.1

Can anyone confirm that these work without having to use the old DLL's?

[1715283348]

1715283348

[1715283348]

1715283348

[1715283348]

1715283348

[1715283348]

1715283348

[1715283348]

1715283348

[presstab]

It might be good for people to take lets say 1/3 of their coins and send them in 10-20 coin chunks around to a second address which can start maturing for tomorrow. The chain will be ticking over manually until later today. This should actually have been done yesterday.

What do you think presstab?

Yes that is probably a good idea.

[billotronic]

I didn't realize that these builds required dll's. I have rebuilt the client and it should be static now. Updated binary can be found here https://github.com/presstab/analcoin/releases/tag/v1.1

Can anyone confirm that these work without having to use the old DLL's?

Yes sir, they are working just fine now

[billotronic]

hmmm not sure if this means anything or not but just synced two clean clients and both hung up on block 50000. A restart fixed this

also, one more node :: 45.55.134.166

[Klaasje]

I didn't realize that these builds required dll's. I have rebuilt the client and it should be static now. Updated binary can be found here https://github.com/presstab/analcoin/releases/tag/v1.1

Can anyone confirm that these work without having to use the old DLL's?

i have downloaded a new DLL en put it in the file where the wallets located works fine here

[Klaasje]

hmmm not sure if this means anything or not but just synced two clean clients and both hung up on block 5000. A restart fixed this

also, one more node :: 45.55.134.166

Had the same thing stuck on 50,000 restarted the wallet now its in sync

[gimpanzee]

Hello all.

Well first of all sorry for not being about today, I have some good news;

1 - It is my birthday today
2 - I am 40 today! OMG!
3 - I started a new job!
4 - Analcoin hard fork happens!

So that's why I wanted the hard fork to happen today, rather than yesterday or the day before

Hope everyone is ok with that. It will either be a good omen or a bad omen time will tell.

So yes today is Butoshi Anamoto's birthday For Real!!!!!!

Perhaps Buttoshi Anamoto is actually the Queen, her birthday is today also! Spooky - I have never seen them in the same room at the same time either!

Looking forward to see what happens at 11.30pm tonight, fingers cross for a successful transfer across to the new fork.

GOOD LUCK EVERYONE!

[jc12345]

Hello all.

Well first of all sorry for not being about today, I have some good news;

1 - It is my birthday today
2 - I am 40 today! OMG!
3 - I started a new job!
4 - Analcoin hard fork happens!

So that's why I wanted the hard fork to happen today, rather than yesterday or the day before

Hope everyone is ok with that. It will either be a good omen or a bad omen time will tell.

So yes today is Butoshi Anamoto's birthday For Real!!!!!!

Perhaps Buttoshi Anamoto is actually the Queen, her birthday is today also! Spooky - I have never seen them in the same room at the same time either!

Looking forward to see what happens at 11.30pm tonight, fingers cross for a successful transfer across to the new fork.

GOOD LUCK EVERYONE!

Congratulations! I hope you have a wonderful day and prosperous year ahead.

[billotronic]

hmmm not sure if this means anything or not but just synced two clean clients and both hung up on block 5000. A restart fixed this

also, one more node :: 45.55.134.166

Had the same thing stuck on 50,000 restarted the wallet now its in sync

lol yeah, 50k... thats what I meant to say

Hello all.

Well first of all sorry for not being about today, I have some good news;

1 - It is my birthday today
2 - I am 40 today! OMG!
3 - I started a new job!
4 - Analcoin hard fork happens!

So that's why I wanted the hard fork to happen today, rather than yesterday or the day before

Hope everyone is ok with that. It will either be a good omen or a bad omen time will tell.

So yes today is Butoshi Anamoto's birthday For Real!!!!!!

Perhaps Buttoshi Anamoto is actually the Queen, her birthday is today also! Spooky - I have never seen them in the same room at the same time either!

Looking forward to see what happens at 11.30pm tonight, fingers cross for a successful transfer across to the new fork.

GOOD LUCK EVERYONE!

Nothing better then getting good anal for your birthday!

[gimpanzee]

It is genuinely my birthday today and I am 40

Thanks for PressTab for doing the Analcoin Hard Fork today, thanks to Billotronic for the Mac wallets, CryptoID and Yobit, and everyone that's contributed so far, its been a great team effort so far!!

Thanks for the positive birthday wishes!! Good luck tonight all!

https://pbs.twimg.com/media/CDIs6orW4AACy7o.jpg:large

[Peter80]

Hello all.

Well first of all sorry for not being about today, I have some good news;

1 - It is my birthday today
2 - I am 40 today! OMG!
3 - I started a new job!
4 - Analcoin hard fork happens!

So that's why I wanted the hard fork to happen today, rather than yesterday or the day before

Hope everyone is ok with that. It will either be a good omen or a bad omen time will tell.

So yes today is Butoshi Anamoto's birthday For Real!!!!!!

Perhaps Buttoshi Anamoto is actually the Queen, her birthday is today also! Spooky - I have never seen them in the same room at the same time either!

Looking forward to see what happens at 11.30pm tonight, fingers cross for a successful transfer across to the new fork.

GOOD LUCK EVERYONE!

Hello my friend!

First of all, HAPPY BIRTHDAY !!!! - Enjoy this Analicious day
Nice to hear that you get the job, thats a good start in your 40. years!
Will be curious what Anal update we will get on your 50. birthday

Is it right, the only thing what i must do is download the new wallet from Homepage und wait until 23:30?

[xrn]

I can compile new wallet from github right now and it will be work after fork ?

[billotronic]

I can compile new wallet from github right now and it will be work after fork ?

yes, its all ready to go

[presstab]

hmmm not sure if this means anything or not but just synced two clean clients and both hung up on block 50000. A restart fixed this

also, one more node :: 45.55.134.166

From my experience, this seems somewhat common with coins that end PoW. 50k is where it ended (too lazy to double check the code at the moment).

Oh and happy birthday buttoshi.

[jc12345]

Here are the Raspberry Pi wallets based on the updated source - both the Qt and the headless daemon.

Important:
1) The wallet was built on a Raspberry Pi2 (ARM7) running Raspbian. It might work on an older Pi but I have not tested it
2) Installation directory for binaries is ~/opt/analcoin
3) All that is needed is to execute the command below on your Pi in a terminal window and aftwards you click on the Analcoin icon on the desktop
4) An Internet connection is required for the installation
5) A bootstrap.dat is used to fast track the blockchain sync
6) You need at least an 8GB memory card
7) The installation itself takes about 30-45min and the loading of the blockchain (once-off) another 30-45min
8.)You cannot just download the binaries, you have to run the script to get the dependencies as well else it will not run

Let me know about any issues that you may encounter.

Command to execute to kickstart the installation:

Code:

wget https://bitbucket.org/jc12345/analcoin/downloads/analcoin_installation_pi.sh && chmod +x analcoin_installation_pi.sh && ./analcoin_installation_pi.sh

Link to installation script
Link to Analcoin-Qt
Link to Analcoind
Link to bootstrap.dat
Link to checksums

[presstab]

Here are the Raspberry Pi wallets based on the updated source - both the Qt and the headless daemon.

Important:
1) The wallet was built on a Raspberry Pi2 (ARM7). It might work on an older Pi but I have not tested it
2) Installation directory for binaries is ~/opt/analcoin
3) All that is needed is to execute the command below on your Pi in a terminal window
4) An Internet connection is required for the installation
5) A bootstrap.dat is used to fast track the blockchain sync - up to block 50350
6) You need at least an 8GB memory card

Let me know about any issues that you may encounter.

Command to execute to kickstart the installation:

Code:

wget https://bitbucket.org/jc12345/analcoin/downloads/analcoin_installation_pi.sh && chmod +x analcoin_installation_pi.sh && ./analcoin_installation_pi.sh

Link to installation script https://bitbucket.org/jc12345/analcoin/downloads/analcoin_installation_pi.sh
Link to Analcoin-Qt https://bitbucket.org/jc12345/analcoin/downloads/Analcoin-qt
Link to Analcoind https://bitbucket.org/jc12345/analcoin/downloads/Analcoind
Link to bootstrap.dat up to block 50350 https://bitbucket.org/jc12345/analcoin/downloads/analcoin_bootstrap_block_50350.gz
Link to checksums https://bitbucket.org/jc12345/analcoin/downloads/checksums-21-Apr-2015.txt

Awesome work! I am glad you were able to work it through   Why 8gb?

[jc12345]

Awesome work! I am glad you were able to work it through   Why 8gb?

To leave some space for other stuff. One might be able to get away with a 4GB but it will be close. I had about 3GB free on a 8GB card after the testing. Ill do a test with a 4GB card as well to see what happens.

[xrn]

This is normal i compile new wallet at beaglebone and have 0 connection ?

[jc12345]

This is normal i compile new wallet at beaglebone and have 0 connection ?

Did you get any errors?

1) Qt wallet or daemon?
2) If Qt was it Qt5 or Qt4?
3) Do you perhaps have a firewall on that is preventing connections?
4) Do you have output files of your qmake and make as well as your make makefile processes for further analysis?
5) Do you have an active working Internet connection on the device?

[gimpanzee]

Good work on the PI Wallet JC, im not sure what the default ports are, they will be in the source, PressTab will know that aswell - he knows Anal inside out !