[ANN][ENRG]Energycoin will be connected with StakeCoin for value creation!

[MystPhysX]

Here you go: https://www.dropbox.com/s/axw452f7zzh6qvz/EnergyCoin-Qt.zip?dl=0

Fully fixed and working. I couldn't really pinpoint the issue so I just compiled it using an older toolchain.

[1714071777]

1714071777

[1714071777]

1714071777

[1714071777]

1714071777

[Harcon]

Since I dont have the wallet for the pi I basically have to use my trusty Pentium 4 3GHz HT system. As the new place I moved into stays at around 32 Deg C almost all the time right now it is causing my Pentium 4 to run just a tad bit hot ( around 71C at the CPU ) this technically exceeds its top end recommendation of 64C, so, I took it off line for the past 36h. Im bringing it back up now so I can put my wallet back on line.

 None of my cooler running systems are available to run a wallet at this time so I may bring it on and off line as the heat conditions change.

[gravitate]

No connections yet but it loaded ok thanks

[gravitate]

And still no connections 

[Harcon]

 I don't know what just happened, but my client just went to overdrive staking. I think I just had something over 30 stakes in the past 30 or 40 mins over all. It just kept going and going. So far only around 2 of them failed to clear.

 Compared to my normal rate of between one and 3 an hour, if Im lucky, thats scary. 

[MystPhysX]

No connections yet but it loaded ok thanks

Nice.

And still no connections 

Add a few nodes.

[crypto4jan]

I don't know what just happened, but my client just went to overdrive staking. I think I just had something over 30 stakes in the past 30 or 40 mins over all. It just kept going and going. So far only around 2 of them failed to clear.

 Compared to my normal rate of between one and 3 an hour, if Im lucky, thats scary.  

We need more nodes online! only 10 active so all the small blockes are staking now.
https://chainz.cryptoid.info/enrg/#!extraction
The Difficulty is very low 0.0008 and a few days ago that was 0.15!

[gravitate]

well lucky you. I can't stake at all

[MystPhysX]

well lucky you. I can't stake at all

addnode=104.131.5.234
addnode=80.101.29.96
addnode=82.69.45.247
addnode=83.60.70.126
addnode=90.182.204.175

Let me know if that doesn't work.

[tdokta]

well lucky you. I can't stake at all

addnode=104.131.5.234
addnode=80.101.29.96
addnode=82.69.45.247
addnode=83.60.70.126
addnode=90.182.204.175

Let me know if that doesn't work.

this is what i am getting:





EnergyCoin version v1.3.0.0 (2015-06-27 16:45:26 +0800)
Using OpenSSL version OpenSSL 1.0.1j 15 Oct 2014
Startup time: 07/31/15 07:53:58
Default data directory /Users/tdokta/Library/Application Support/EnergyCoin
Used data directory /Users/tdokta/Library/Application Support/EnergyCoin
dbenv.open LogDir=/Users/tdokta/Library/Application Support/EnergyCoin/database ErrorFile=/Users/tdokta/Library/Application Support/EnergyCoin/db.log
Bound to [::]:22706
Bound to 0.0.0.0:22706
Loading block index...
LoadBlockIndex(): hashBestChain=00000a5ac2dc57cfb0b9  height=0  trust=1  date=04/29/14 18:48:35
LoadBlockIndex(): synchronized checkpoint 00000a5ac2dc57cfb0b92bc8be7731fe6a94a8c1c49a0d2f32e9e2da4f7d2308
Verifying last 0 blocks at level 1
 block index               1ms
Loading wallet...
nFileVersion = 1030000
 wallet                  651ms
Loading addresses...
Loaded 0 addresses from peers.dat  0ms
mapBlockIndex.size() = 1
nBestHeight = 0
setKeyPool.size() = 100
mapWallet.size() = 0
mapAddressBook.size() = 1
send version message: version 70002, blocks=0, us=0.0.0.0:0, them=0.0.0.0:0, peer=127.0.0.1:0
Done loading
DNS seeding disabled
ThreadMapPort started
ThreadSocketHandler started
ThreadOpenAddedConnections started
ThreadOpenAddedConnections exited
ThreadOpenConnections started
ThreadMessageHandler started
refreshWallet
ThreadStakeMinter started
CPUMiner started for proof-of-stake
Flushed 0 addresses to peers.dat  2ms
connection timeout
ERROR: GetMyExternalIP() : connection to 91.198.22.70:80 failed
GetMyExternalIP() received [] [::]:0
GetMyExternalIP() received [131.203.125.3] 131.203.125.3:0
GetMyExternalIP() returned 131.203.125.3
AddLocal(131.203.125.3:22706,4)
No valid UPnP IGDs found
 Marker - 31/07/2015 7:54:40 pm


maybe i have the nodes in the wrong place?

[MystPhysX]

well lucky you. I can't stake at all

addnode=104.131.5.234
addnode=80.101.29.96
addnode=82.69.45.247
addnode=83.60.70.126
addnode=90.182.204.175

Let me know if that doesn't work.

this is what i am getting:

-snip-

maybe i have the nodes in the wrong place?

You can't see nodes either? May I know what OpenSSL version the other clients are using?

edit - It works for me. Are you placing the nodes in EnergyCoin.conf in the EnergyCoin folder in Application Support folder?

[tdokta]

well lucky you. I can't stake at all

addnode=104.131.5.234
addnode=80.101.29.96
addnode=82.69.45.247
addnode=83.60.70.126
addnode=90.182.204.175

Let me know if that doesn't work.

this is what i am getting:

-snip-

maybe i have the nodes in the wrong place?

You can't see nodes either? May I know what OpenSSL version the other clients are using?

edit - It works for me. Are you placing the nodes in EnergyCoin.conf in the EnergyCoin folder in Application Support folder.

yup ...

files in energycoin folder are: bootstrap.dat, energycoin.conf, peers.dat, blkindex.dat, and folder called database with log in it.

[crypto4jan]

yup ...

files in energycoin folder are: bootstrap.dat, energycoin.conf, peers.dat, blkindex.dat, and folder called database with log in it.

Maybe idea to delete (or move) blkindex.dat and folder database and then start again.
So only the files: bootstrap.dat, energycoin.conf, peers.dat in the energyCoin folder.
The wallet client is then creating database and blkindex.dat and blk0001.dat if it is working ok.

Is this correct MystPhysX?

[tdokta]

energycoin.conf only holds the addnode addresses, should there be any other commands in the file? maybe what is missing?
have tried the removal of the other files,
thanks for the info,

[crypto4jan]

energycoin.conf only holds the addnode addresses, should there be any other commands in the file? maybe what is missing?
have tried the removal of the other files,
thanks for the info,

Maybe try this:
http://coinmagi.org/files/energycoin/EnergyCoin.conf
This is the EnergyCoin.conf Joe created for EnergyCoin when he helped us to restart.
Add the info:

Code:

rpcport=22715
rpcallowip=127.0.0.1

rpcuser=user9
rpcpassword=pass9

Edit link th the original message: https://bitcointalk.org/index.php?topic=589008.msg11108520#msg11108520

[MystPhysX]

well lucky you. I can't stake at all

addnode=104.131.5.234
addnode=80.101.29.96
addnode=82.69.45.247
addnode=83.60.70.126
addnode=90.182.204.175

Let me know if that doesn't work.

this is what i am getting:

-snip-

maybe i have the nodes in the wrong place?

You can't see nodes either? May I know what OpenSSL version the other clients are using?

edit - It works for me. Are you placing the nodes in EnergyCoin.conf in the EnergyCoin folder in Application Support folder.

yup ...

files in energycoin folder are: bootstrap.dat, energycoin.conf, peers.dat, blkindex.dat, and folder called database with log in it.

It's not energycoin.conf, it's EnergyCoin.conf. The case is very important.

[energycoin.operations]

I hope de MacOSX wallets are running now.
To see the network I think so:

For wallet 1.3 17! nodes online the last 24 hour!

Code:

addnode=135.19.164.214
addnode=137.224.252.10
addnode=180.248.105.8
addnode=180.248.231.246
addnode=212.123.176.143
addnode=213.155.254.2
addnode=213.46.197.237
addnode=223.134.228.84
addnode=36.74.245.251
addnode=36.83.57.72
addnode=52.11.248.171
addnode=52.25.242.134
addnode=70.92.184.203
addnode=80.56.212.17
addnode=91.44.201.96
addnode=92.111.167.82
addnode=93.211.245.244

For wallet 1.1.3 (this is 1.2) there are 5 nodes:
addnode=104.131.5.234
addnode=80.101.29.96
addnode=82.69.45.247
addnode=83.60.70.126
addnode=90.182.204.175

I hope all users change to the new version soon.

[gravitate]

I hope de MacOSX wallets are running now.
To see the network I think so:

For wallet 1.3 17! nodes online the last 24 hour!

Code:

addnode=135.19.164.214
addnode=137.224.252.10
addnode=180.248.105.8
addnode=180.248.231.246
addnode=212.123.176.143
addnode=213.155.254.2
addnode=213.46.197.237
addnode=223.134.228.84
addnode=36.74.245.251
addnode=36.83.57.72
addnode=52.11.248.171
addnode=52.25.242.134
addnode=70.92.184.203
addnode=80.56.212.17
addnode=91.44.201.96
addnode=92.111.167.82
addnode=93.211.245.244

For wallet 1.1.3 (this is 1.2) there are 5 nodes:
addnode=104.131.5.234
addnode=80.101.29.96
addnode=82.69.45.247
addnode=83.60.70.126
addnode=90.182.204.175

I hope all users change to the new version soon.

I will try it later I have another peer file to try out. Fingers crossed.

[gravitate]

Is there any premine on this you can use with carbon trading or something? I have a few ideas regarding this

[crypto4jan]

Is there any premine on this you can use with carbon trading or something? I have a few ideas regarding this

The total premine 100M was distributed to 800 Bitcointalk stakeholders.
Each holder got 125k EnergyCoin and the most stakeholders choice to get some crumbs of BTC for there share and dumped for only 10 Satoshi.
The EnergyCoin team now controlls 35% of the total and we never sell!
It is the EnergyCoin Cooperation (before we named it Foundation) see picture below.


I like to hear what your idea's are for carbon trading?