Change thermal paste with Artic MX-4 for Antminer S5

[marvykkio]

Today I changed thermal paste on Antminer S5, taking advantage that I have to get a pcb I wanted to try a single pcb waiting comes the other,
Well I can confirm that the thermal paste that uses bitmain and quite good, the only difference I noticed with MX4 artic, and which maintains a temperature standard 46 ° celsius, here in Italy is 11:05 AM, outside temperature about 30 ° miner put it down in the cellar with a temperature of 22 °, and about 25 minutes already working with frequency defoult 350M, and the temperature is always the same 46 ° celsius.

[1713914776]

1713914776

[1713914776]

1713914776

[Tupsu]

You put too much thermal paste.

[marvykkio]

I've noticed that I had put too

[revelacaogr]

what temp u had before (stock paste ) with the same settings ??

[marvykkio]

before arriving even at 50 ° / 51 ° Celsius, and now stable 46 ° / 47 ° Celsius

[revelacaogr]

thank u. Also u can put heatsinks to the chips that r to the oposite side of the blade (backside )

[revelacaogr]

thank u. Also u can put heatsinks to the chips that r to the oposite side of the blade (backside )

also in mho u used a lot of paste...

[marvykkio]

Now I ordered the fan delta, delta 120 mm 12 cm PWM fan tfc1212de 252CFM vs PFB1212UHE, let's see if I can lower the temperature even more, here the summer and around the corner, we have already 30 °, here we come to the end of July 42nd, August, so I prepare

[marvykkio]

thank u. Also u can put heatsinks to the chips that r to the oposite side of the blade (backside )

also in mho u used a lot of paste...

I do not believe much in these small heatsinks to be put on the back

[revelacaogr]

i use 2 noctuas mf-f12 3000 industriasl ppc.i have 4celcius down

[marvykkio]

ejjeje the noctua is the best, but they cost a lot here in Italy EUR 30 for 1,

approximately $ 34

[Biffa]

Waaaay too much thermal paste there mate.. you need half or quarter of a grain of rice per chip.

[marvykkio]

on pcb I arrive Tuesday put less thermal paste, the important thing is evenly cover the entire chip

[mavericklm]

you should edit first post as there is nothing understandable there!
put before.... and after...

[marvykkio]

What would I change?

[adaseb]

The only problem with that MX-4 stuff is thats its very expensive. Its around $15 and its only good for only 1 miner.

[revelacaogr]

ok , here r my stats....(before  and  after) :


--with stock fan and 19c amb_temp

https://www.dropbox.com/s/bcs8zppty8vvr2h/with%20stock%20fan%20and%2019c%20amb_temp.jpg?dl=0


--with aluminium cover- 2 noctuas rf-f12 3000 indastrial ppc   and 25c amb_ temp

https://www.dropbox.com/s/x15g6ve2l7zijub/with%20aluminium%20cover-%202%20noctuas%20rf-f12%203000%20indastrial%20ppc%20%20%20and%2025c%20amb_%20temp.jpg?dl=0

--with aluminium cover- 2 noctuas rf-f12 3000 indastrial ppc +arctic mx-4  and 28c amb_ temp

https://www.dropbox.com/s/ar516p93k0ffgqb/with%20aluminium%20cover-%202%20noctuas%20rf-f12%203000%20indastrial%20ppc%20%2Barctic%20mx-4%20%20and%2028c%20amb_%20temp.jpg?dl=0

antminer photos

https://www.dropbox.com/s/7dxqwv7nvkn15hf/IMAG0386.jpg?dl=0

https://www.dropbox.com/s/vfy2bgg0i66bcnm/IMAG0385.jpg?dl=0

https://www.dropbox.com/s/cn060mkr5jy47j0/IMAG0383.jpg?dl=0

PS:now the extenal temp is 32c but in thursday will gow at 39c so i must put the ant in the  ref/tor  and go to the beach

[mavericklm]

revelacaogr,  can you please test with or without cover at same room temp and same cooling?

thx!

[ajw7989]

The only problem with that MX-4 stuff is thats its very expensive. Its around $15 and its only good for only 1 miner.

Although $15 for thermal paste isnt cheap the price of the miner and room to overclock it slightly more can help offset some of the costs

[revelacaogr]

revelacaogr,  can you please test with or without cover at same room temp and same cooling?

thx!


i tested yesterday but i dont have a snap. I   can tell u for sure that:  without cover at same room temp and same cooling is 4-5c more