[ANN] [PI metal detector private shares with 50% profits] by alcurEX CEO

[halibit]

Hello Halibit,

How is the model progressing?
Have you finished the receiver circuit?

Thanks

About model:
I'm on half way with circuit.
Power supply and transmitter are ready.
I made it so wave duration, length and frequency can change.
Next is receiver circuit.. and then need to balance faster coil than I have ever seen used with PI.
(Need to be low noise components and coil self resonance)

Hello.
Yes schematic is all ready and Breadboard model tested.
All fine so far.
Tomorrow I will start with pcb.
And I need to make unique coil for this model. but I already have all parts for that.
Then I can start testing it.
I will print results in here.
This project I really like

[1713977069]

1713977069

[1713977069]

1713977069

[1713977069]

1713977069

[halibit]

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

[sorryforthat]

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

Very cool. I cannot wait to see the results and appreciate the updates.

[jamesjde]

Hello halibit,

Can you update us on the progress you have made with the model in the past two months?

Thank you

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

[halibit]

Hello halibit,

Can you update us on the progress you have made with the model in the past two months?

Thank you

After several tests I have made our version 1 model using 400 to 1000v pulse.
Opto isolated pic will read pulse to the low voltage size and separate cycle voltage result in eight samples with 1024 levels.
Those eight samples are depth and 1024 value is target size.

This model will have
- LCD screen and sound monitoring.
- microprocessor programmed system.
- Manual and auto Ground balancing.
- Surface trash and iron filtering system
- Target depth and size calculating.

Patience, I can show results soon..

Rest 5000 shares will be available after that.

I know you are waiting, I have been busy with alcurex but i have some progress with project.

On next week, I can send scope picks about tx and rx pulse data, but before I can show how it will acting in real life, I need to find one more component. I need 1-10 or max100us isolated relay for damping rx coil before reading process. This need to be physically open/close model so it will not damp coil when collector is open.
-halibit-

[jamesjde]

Hello halibit,

We are now one year past the start of the project.
Have you succeeded in creating a working metal detector?

Thank you

[halibit]

Hello halibit,

We are now one year past the start of the project.
Have you succeeded in creating a working metal detector?

Thank you

I have no time even touch the project since last message.
Alcurex has take all my time but this will continue after I can get time.
Maybe I should search some other el guy to finishing this project to a live with me.
My time is so limited.

[sorryforthat]

I have no time even touch the project since last message.
Alcurex has take all my time but this will continue after I can get time.
Maybe I should search some other el guy to finishing this project to a live with me.
My time is so limited.

I think it may be time to admit that your attempts were a failure. Hell, you didnt even make updates on what you mined on the trip which was supposed to be dispersed between shareholders. It was a foolish investment on my part; one of many and definitely not the last. If the idea is dead and no longer moving forward, then own it and let everyone move forward.