[WTS] 4 x 5870, 5 x 5970, 6 x 80+ Power Supply

[kyoo]

Hi everyone,

I sell my rigs for bitcoins, I don't have time anymore to monitor them beside my job
Here's the first part of it, they will be shipped with signature, depending on your location for 1-1.7 BTC. Payment is in advance, if you wish with trust through 3rd party here in the forum:


Fully working:

1 x Sapphire 5870 1 GB: 11 BTC + shipping [SOLD]

1 x XFX 5870 1 GB: 10 BTC + shipping [Fan needs to be replaced, SOLD with defect fan]

1 x Asus 5870 1 GB: 11 BTC + shipping [SOLD]



1 x XFX 5970 Black Edition: 22 BTC + shipping [SOLD]
2 GB, core 725 Mhz, ram 2000 Mhz


2 x 1 x XFX 5970 Black Edition Limited: 30 BTC + shipping [SOLD]
Only 1000 pieces ever produced, 2 GB 4 GB!, 850 Mhz core (two full 5870 cores), 2400 Mhz, 6x Mini-DisplayPort
http://xfxforce.com/en-gb/Products/Graphics-Cards/ATI/ATI-Radeon-HD-5000/ATI-Radeon-HD-5970-Black-Edition-Limited/HD-597X-ENFN.aspx
Accessories I think are not 100 % complete Accessories are complete.


1 x Club3D 5970 2 GB: 21 BTC + shipping [SOLD]

1 x Asus 5970 2 GB [SOLD]



Fans needs to be replaced because it makes noise. But the card is fully working:

1 x XFX 5870 1 GB

1 x XFX 5970 Black Edition Limited [On the way of getting fixed through warranty]



If you are interested PM me for more details. I'm Swiss, but I have once a week the possibility to go over the border to Germany. If necessary I will ship the cards from there to avoid customs taxes and high shipping costs. If you live near me you can of course also pick up the cards personally if you like.

All the cards will be shipped with the original package and adapters with few exeptions which I will of course tell you.


Update: Power Supplies for sale:
All power supplies are complete with all cables, where not stated differently. Prices are without shipping.

1 x Corsair AX850 80+ gold incl. OVP - 16 BTC
Has warranty from digitec.ch until 15.6.2018


2 x Thermaltake Toughpower Grand 650W 80+ gold - 9.5 BTC each
Pics: https://www.wuala.com/Kyoo_Share/webshare/bitcointalk.org/Thermaltake%20Toughpower%20Grand%20650W%2080+%20gold/?key=T35qsZjmWw2c
1 Thermaltake has 1 Sata-cable missing atm.
Has warranty, details follow.

1 x Seasonic SS-660KM Active PFC F3 80+ gold - 11 BTC
Has warranty from digitec.ch until 30.05.2016


1 x Club3D 1200 W CSP-X1200CS 80+ silver - 16 BTC
Has warranty from digitec.ch until 21.7.2013


1 x Thermaltake Toughpower 850 W 80+ Model W0131 - 5 BTC
Including: 1 x 24 pin + 1 x 8 pin + 1 x 4 pin to mainbord, 2 x 8 pin PCI-E, 2 x 6 pin PCI-E, 8 x 12 V 4 pin + 3 x 4 pin-to-sata adapter
No warranty


Here's my bitcoin-otc rating:
http://bitcoin-otc.com/viewratingdetail.php?nick=kyoo

My bitmit.net rating:
https://www.bitmit.net/en/user/kyoo

[1715359350]

1715359350

[1715359350]

1715359350

[1715359350]

1715359350

[teflone]

location location.... location ??

[kyoo]

location location.... location ??

I live in Switzerland if that's your question?

[kyoo]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Public announcement for the record of the following deal:
I have sold the XFX 5970 Black Edition Limited (including all
accessories) for 30 BTC + 1.7 BTC shipping to dobo79 today 14.10.2012.

I received the deposit of 21.7 BTC today
(http://blockchain.info/address/171Y2uFaAFFxnbz5tVpT2vNGGgYd6G6VN6)
14.10.2012 and I am going to ship the card 15.10.2012 with DHL if
possible and will provide him the tracking number. At the latest I'm
going to ship it 17.10.2012.

dobo79 will pay me the remaining 10 bitcoins after 5-6 days (to the end
of the week).

Kyoo

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (Darwin)
Comment: GPGTools - http://gpgtools.org
Comment: Using GnuPG with Mozilla - http://www.enigmail.net/
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=Az4h
-----END PGP SIGNATURE-----

[gyverlb]

Does the last XFX 5970 BE Limited Edition (the one with the noisy fan to replace) give full control of fan speeds and allow undervolting to 0.95V with cgminer on Linux?

[kyoo]

Does the last XFX 5970 BE Limited Edition (the one with the noisy fan to replace) give full control of fan speeds and allow undervolting to 0.95V with cgminer on Linux?

hi gyverlb,

I have to check that. But according to my experience with the card you can do pretty much everything, so there are no factory locks whatsoever. It's going to be the second half of the week until I can answer your question.

cheers

[gyverlb]

hi gyverlb,

I have to check that. But according to my experience with the card you can do pretty much everything, so there are no factory locks whatsoever. It's going to be the second half of the week until I can answer your question.

cheers

OK will wait, some additional info/questions.

Fan control is obvious to check.

For voltage control there are 2 ways I can think of: check the power consumption at 0.951V and 0.95V, if there's a noticeable jump, the card doesn't fake its ability to run at 0.95V (drivers will happily take voltage values they can't handle). Another way is to read what cgminer advertises as the valid range when you try to change the voltage. If 0.95V is the range's bottom value it should be supported (at least it then works properly on all cards I tried).

It seems the fan on this model is the same than all other 5970/5870 reference fans (with the difference that its cable is longer to reach the connector). Can you confirm this?

If the voltage and fan control is OK and the fan can be replaced by a reference fan, I'll offer 190€ in BTC shipped to France (currently this is around 21BTC based on 24h MtGox average). This is just a bit more than I just paid for a reference 5970 shipped. The model is worth more than a reference model, but I'll have to replace the fan (which means making a reference fan power cable longer, replacing the thermal grease and depending on their condition the thermal pads too).

[420]

i thought the black edition xfx 5970 was overclocked

[gyverlb]

i thought the black edition xfx 5970 was overclocked

It runs at 850MHz instead of 725MHz, yes.

There are several 850MHz 5970 models around : the Ares, Sapphires with Accelero, this XFX and some of these cards make a huge tradeoff in power usage to reach these frequencies (the 2 8-pin PCI-express connectors they all use are not there for show).

But there's no reason that the chip couldn't run at 0.95V underclocked though and I believe these overclocked card may be more efficient if they can be set to 0.95V than regular ones (all the 5870 I have get better results when undervolted if they overclock well too). A chip capable of 850MHz at 1.05V or more might run at ~750MHz at 0.95V and be one of the last bastions of GPU mining to fall

But for example the two Sapphire I have can't be set to 0.95V and this make them less fit for Bitcoin mining (this is why I sold one recently) this is why I'd like to know if 0.95V is possible.

[kyoo]

hi gyverlb,

I have to check that. But according to my experience with the card you can do pretty much everything, so there are no factory locks whatsoever. It's going to be the second half of the week until I can answer your question.

cheers

OK will wait, some additional info/questions.

Fan control is obvious to check.

For voltage control there are 2 ways I can think of: check the power consumption at 0.951V and 0.95V, if there's a noticeable jump, the card doesn't fake its ability to run at 0.95V (drivers will happily take voltage values they can't handle). Another way is to read what cgminer advertises as the valid range when you try to change the voltage. If 0.95V is the range's bottom value it should be supported (at least it then works properly on all cards I tried).

It seems the fan on this model is the same than all other 5970/5870 reference fans (with the difference that its cable is longer to reach the connector). Can you confirm this?

If the voltage and fan control is OK and the fan can be replaced by a reference fan, I'll offer 190€ in BTC shipped to France (currently this is around 21BTC based on 24h MtGox average). This is just a bit more than I just paid for a reference 5970 shipped. The model is worth more than a reference model, but I'll have to replace the fan (which means making a reference fan power cable longer, replacing the thermal grease and depending on their condition the thermal pads too).

Hi, didn't have time to fulfill your request this weekend. As I'm working abroad through the week I will only be able next weekend to check it hopefully.

[420]

7btc for 5870 fully working

[kyoo]

7btc for 5870 fully working

9 BTC + shipping for the XFX 5870 1 GB and we have a deal.

[pazor]

some pictures ?

[kyoo]

some pictures ?

Hi, I will post images in the next few days. Cheers

[Gladamas]

If you post a picture of the Club3D 5970 with a notecard with your username and "bitcointalk.org" on it, I'll consider buying it.

[kyoo]

If you post a picture of the Club3D 5970 with a notecard with your username and "bitcointalk.org" on it, I'll consider buying it.

Hi Gladamas,

thanks for your interest. As you can see in OP I already promised to post pictures and didnt get time to do it, sry for that...I'm not at home now (where the cards are). I really try to get the pictures posted till the end of the week.

Cheers

[Gladamas]

If you post a picture of the Club3D 5970 with a notecard with your username and "bitcointalk.org" on it, I'll consider buying it.

Hi Gladamas,

thanks for your interest. As you can see in OP I already promised to post pictures and didnt get time to do it, sry for that...I'm not at home now (where the cards are). I really try to get the pictures posted till the end of the week.

Cheers

No problem. How much would shipping be to the U.S.?

Danke.

[kyoo]

If you post a picture of the Club3D 5970 with a notecard with your username and "bitcointalk.org" on it, I'll consider buying it.

Hi Gladamas,

thanks for your interest. As you can see in OP I already promised to post pictures and didnt get time to do it, sry for that...I'm not at home now (where the cards are). I really try to get the pictures posted till the end of the week.

Cheers

No problem. How much would shipping be to the U.S.?

Danke.

Shipping with DHL to the US including tracking and insurance is 16.9 €. As we are trading in Bitcoin it will be (Including packaging): 1.6 BTC

[gyverlb]

Hi, didn't have time to fulfill your request this weekend. As I'm working abroad through the week I will only be able next weekend to check it hopefully.

Any news on fan/voltage control of the XFX 5970 BE with a fan to replace ?

[kyoo]

Hi, didn't have time to fulfill your request this weekend. As I'm working abroad through the week I will only be able next weekend to check it hopefully.

Any news on fan/voltage control of the XFX 5970 BE with a fan to replace ?

Hi,
I didn't get time to test it, I give up. But thanks anyway for your interest. I am going to send the card back to the shop to demand warranty.

Cheers

[fankih]

How much you would be asking from XFX 5970 BE with faulty fan?

The fan is just making noise or it doesn't keep the card stable at all?

[kyoo]

How much you would be asking from XFX 5970 BE with faulty fan?

The fan is just making noise or it doesn't keep the card stable at all?

Hi fankih,

the fan needs to be replaced. I will send the card in to get warranty replacement, will let you know if it is available for sale again - most probably I will get the money instead.