[ANN] Expanse (EXP) - 1st Stable fork of Ethereum (New Algo + PirlGuard)

[Dogeshop_eu]

How to mine it ?

[1713561114]

1713561114

[1713561114]

1713561114

[ciki022]

I have problem with withdrawing EXP from bleutrade, transaction was made on 2015-09-17 07:05:12, there is no TX, just stands that amount of coins that are sent to specific address. I checked receiving address twice, there is no mistakes.
But coins are not received yet.
I created ticket on Bleutrade, but there is no answer from support.
Now to check where coins are ?

[Hazcat]

Awesome that this is on polo now!

Question - what does an R9 280x run like mining exp? (21MH??)

Around 22.5 to 25 stock, depending on the card. I do around 25.3 to 26 at 1150 MHZ core OC on a HD 7970, older version of the 280x. Core overclock improves hashrates and underclocking memory decreases power consumption with very little hashrate loss, if any.

I'm running 3 cards and get around 76 to 78 MHS, sometimes it peaks to 80 MHS.

Ether mining with different cards is odd. Tahiti (7950, 7970, 280X) and Hawaii (290(X), 390(X)) cards like higher GPU speed and Pitcairn (7870, 270(X), 370(X)) seem to like higher memory speeds and almost couldn't give a damn about higher GPU speeds.

I notice while mining that the algo doesn't even use more that 1.8GB of memory per card. Maybe there's a sweet spot for the memory speed for the Pitcairn. Strange if the core oc on Pitcairn/similar GCN core types don't gain any hashrate increase.

Cool thanks guys.

I currently use all gigabyte OC cards
270x gets 20 on exp
380 get 18 on exp and hate to be over locked
And just bought 2 x 280x so was hoping they'd boost my hash a bit

[randywald]

I have problem with withdrawing EXP from bleutrade, transaction was made on 2015-09-17 07:05:12, there is no TX, just stands that amount of coins that are sent to specific address. I checked receiving address twice, there is no mistakes.
But coins are not received yet.
I created ticket on Bleutrade, but there is no answer from support.
Now to check where coins are ?

I also have a problem.

Sent 70 coins from bleutrade to bittrex. I never got them.

I thought it is bittrex' fault.

@ Hazcat. Good decision to buy 280X. Still best card for this. I hate the new amd cards. 3XX series ist just rebranded and the Fury cards are way too expensive.

Edit: I have 55 MH/s on my 2x 280X rig (1125 core / mem stock). I didn't sound out the very maximum, cause the machine is remote acces (60 km away) and i don't want it to hang up.

[ciki022]

I have problem with withdrawing EXP from bleutrade, transaction was made on 2015-09-17 07:05:12, there is no TX, just stands that amount of coins that are sent to specific address. I checked receiving address twice, there is no mistakes.
But coins are not received yet.
I created ticket on Bleutrade, but there is no answer from support.
Now to check where coins are ?

I also have a problem.

Sent 70 coins from bleutrade to bittrex. I never got them.

I thought it is bittrex' fault.

@ Hazcat. Good decision to buy 280X. Still best card for this. I hate the new amd cards. 3XX series ist just rebranded and the Fury cards are way too expensive.

I sent  coins to poloniex, also sent coins from suprnova to poloniex, and that coins are received, conclusion is that problem is bleutrade, right ?

[Zywiec]

My withdraw was processed normally.

[Feeniks]

I think that is bleutrade mistake because on bitrrex from wallet go very well

[calem]

take the :3000 off and it should work

yeah fail

I was able to join when I took away :3000 but I can confirm it no longer works with or without.

Waiting on a new link to invite some people.

[Master mind]

Is this new Aiden coin ?

Thanks

[P-Funk]

I've had an error withdrawing Expanse from Bittrex. The withdrawal is listed on the wallets page but the tx never made it to the destination, and the txid hash comes back as "null" when I look it up in gexp. Hopefully it'll get resolved.

[reftop123]

https://www.bittrex.com/Market/Index?MarketName=BTC-EXP

Deposit takes loooooooooong on bittrex

Just send to bluetrade, prepare to wait for hours, but it only takes several minutes!

[Master mind]

Cool to see how this has started off I'm holding off for a bit to see where the price settles. I've learend not to buy in the first days of any release

Of course . His  Aiden coin goes from 20k to 88 satoshi .

[randywald]

Now i ran out of coins. Why do people want to buy more than i can produce

[finder]

Who can tell me why my mill can not achieve speed


I single MIS 270 CC 14 m but I received four 270 CC received 22 m?   why???

[Master mind]

Now i ran out of coins. Why do people want to buy more than i can produce

Soon will be too much EXP coins for sale like Aiden coins.  

[P-Funk]

Now i ran out of coins. Why do people want to buy more than i can produce

Haha I'm in the same situation. I've been selling since Bleu first added their market and never would've thought this Poloniex thing would happen. Crazy!

[Abiky]

If it doesn't work, then 'gexp' is probably not on the %PATH%

Code:

echo %PATH%

 ... so find 'gexp' location, and CD there first.

Similiar to this:

Code:

C:
cd C:\ProgramData\chocolatey\lib\geth-stable\tools
geth account new

(This example is from my geth (go-ethereum) installation, and 'geth' lives in "C:\ProgramData\chocolatey\lib\geth-stable\tools")


EDIT:
Just looked into Expanse - you already have exactly that already :-)
--> "Setup_Step_2_new_account.bat" - but see my suggestion below.

It will take me some time to get used to Ethereum/Expanse's commands but I'll get there. It's a totally new world in crypto. 

The command line has millions of advantages.

One hint, to make it all "clickable" again ...

When you notice that you type the same command line command over and over again
... just make a .bat file (.bat = a 'batch' file of commands that shall be executed).

In my above example, if creating a new account were the thing that you want to do,
just create (with text editor, e.g. notepad, or better notepad++) a file with this content:

Code:

gexp account new
pause

and save it as

Code:

gexp_account_new.bat

and ... double-click it.

Great! Thanks for this useful advice. Creating bat files with the commands listed above makes my life easier by not having to type the same command over and over again. I'm going to keep studying Ethereum/Expanse's commands until I really get the hang of it. In the meantime, I'll just create bat files for automation. 

[nix_on]

Hi
How many people have a problems with connection ?
Blockchain keep disconnect and  I'm mining few or one block back what is nonsense

[yudhistira]

If it doesn't work, then 'gexp' is probably not on the %PATH%

Code:

echo %PATH%

 ... so find 'gexp' location, and CD there first.

Similiar to this:

Code:

C:
cd C:\ProgramData\chocolatey\lib\geth-stable\tools
geth account new

(This example is from my geth (go-ethereum) installation, and 'geth' lives in "C:\ProgramData\chocolatey\lib\geth-stable\tools")


EDIT:
Just looked into Expanse - you already have exactly that already :-)
--> "Setup_Step_2_new_account.bat" - but see my suggestion below.

It will take me some time to get used to Ethereum/Expanse's commands but I'll get there. It's a totally new world in crypto. 

The command line has millions of advantages.

One hint, to make it all "clickable" again ...

When you notice that you type the same command line command over and over again
... just make a .bat file (.bat = a 'batch' file of commands that shall be executed).

In my above example, if creating a new account were the thing that you want to do,
just create (with text editor, e.g. notepad, or better notepad++) a file with this content:

Code:

gexp account new
pause

and save it as

Code:

gexp_account_new.bat

and ... double-click it.

Great! Thanks for this useful advice. Creating bat files with the commands listed above makes my life easier by not having to type the same command over and over again. I'm going to keep studying Ethereum/Expanse's commands until I really get the hang of it. In the meantime, I'll just create bat files for automation. 

how to write bat command to execute multi executable command file

ex: (this not work)

echo off
gexp attach
admin.peers
exp.getBalance(exp.coinbase)

when run this bat file we can see 3 info appear on console with one click

[HappyComplex]

slack link in OP is not working.

How to join slack?