maxgputemp 85
stratumproxy enabled
proxywallet 0x5eb6fd512408eef848a060d197e64b419d716bc7
proxypool1 us1.ethpool.org:3333
proxypool2 eu1.ethpool.org:3333
flags --cl-global-work 16384 --farm-recheck 200
globalfan 85
# !!!!!!!!!!!!! IMPORTANT NOTICE !!!!!!!!!!!!!!!!!!
#
# Read the ethOS knowledge base, a useful guide to getting set up:
http://ethosdistro.com/kb/# Read the ethOS changelog for version information and latest changes:
http://ethosdistro.com/changelog/#
# WARNING: Using apt-get to upgrade, update, and/or install packages is unsupported and will likely break ethOS.
#
# NOTE: There is no email or skype support for ethOS.
# If you need help with any aspect of ethOS, please talk to us in IRC (#ethereumOS on Freenode).
# If you do not have an IRC client, you can use this webchat:
https://webchat.freenode.net/#
# !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
#
# EXAMPLES
#
# example config settings that apply to all rigs:
#
# maxgputemp 85
# stratumproxy enabled
# proxywallet 0x5eb6fd512408eef848a060d197e64b419d716bc7
# proxypool1 eth-us.dwarfpool.com:8008
# proxypool2 eth-eu.dwarfpool.com:8008
# flags --farm-recheck 200
# globalcore 1000
# globalfan 90
# globalpowertune 20
# globalmem 1250
#
# example config settings that apply to individual rigs (and their respective individual GPUs):
#
# cor c94e13 950 950 950 950 950
# mem c94e13 1250 1250 1250 1250 1250
# fan c94e13 90 80 85 100 70
# pwr c94e13 10 20 15 15 20
# reb c94e13 1
# cor a23def 970 1000 1100 980 1060
# mem a23def 1250 1250 1500 1250 1500
# fan a23def 100 100 70 60 90
# pwr a23def 10 20 20 15 20
# reb a23def 1
#
# DOCUMENTATION
#
# For instructions on setting configs, see
http://ethosdistro.com/kb/#remote-config#
# If using "pool" parameter, write WORKER (a placeholder variable) in place of rig name (i.e. NOT rig1, myrig, home, warehouse2, etc).
#
# pool: use this if you have a network proxy or to define a getwork pool (example:
http://pool.com:port/WORKER )
# stratumproxy: enabled or disabled, if enabled, you will bypass "pool" and connect to stratum proxy located on this rig
# proxy wallet: the ethereum address to which this rig's proxy will mine (only used if stratumproxy is enabled)
# proxypool1: this rig's stratum proxy's first pool (only used if stratumproxy is enabled)
# proxypool2: this rig's stratum proxy's failover pool (only used if stratumproxy is enabled)
# flags: set desired ethminer flags here
# maxgputemp: the temperature in C that your GPUs will trigger ethminer to turn off
# globalcore: set the global core clock of all GPUs
# globalmem: set the global mem clock of all GPUs
# globalfan: set the fan speed percent of all GPUs
# globalpowertune: set the power tune setting of all GPUs (notes from dev: 20 is default/max on everything except 290/390; r9 290 should use 50)
#
# Your WORKER names are assigned automatically by the OS, do not change them. They are 6-digit alphanumeric codes.
#
# cor [worker]: set the core clock of individual GPUs on a single rig, [worker] is the worker/rig name of the single rig as assigned by the OS.
# mem [worker]: set the core clock of individual GPUs on a single rig, [worker] is the worker/rig name of the single rig as assigend by the OS.
# fan [worker]: set the fan speed of individual GPUs on a single rig, [worker] is the worker/rig name of the single rig as assigend by the OS.
# pwr [worker]: set the powertune of individual GPUs on a single rig, [worker] is the worker/rig name of the single rig as assigend by the OS.
# reb [worker]: increment this value (example: 4 becomes 5) and the single rig will automatically reboot within 10 minutes.
#
# AUTOMATIC REBOOT NOTES
#
# You are able to reboot remotely. Start with "1" (no quotes) to reboot a rig:
#
# reb a23def 1
#
# Then, if you want to reboot again, increment it to 2, then 3, then 4, etc etc (never skip any numbers).
