torig
|
|
April 24, 2017, 07:28:08 AM |
|
After this command: apt-get update apt-get upgrade apt-get dist-upgrade apt-get install build-essential libssl-dev libboost-all-dev libdb5.1 libdb5.1-dev libdb5.1++-dev libtool apt-get install git ntp make g++ gcc autoconf cpp ngrep iftop sysstat autotools-dev pkg-config sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libqrencode-dev git clone https://github.com/transferdev/Transfercoin.gitcd Transfercoin/src sudo apt-get remove qt3-dev-tools libqt3-mt-dev sudo apt-get install libqt4-dev libminiupnpc-dev apt-get install libmpc-dev sudo make -f makefile.unix # Headless transfer ----------------------------------------------------------------------------- Error again,Ubuntu 16.04 ,4GB memory: ...T16 = boost::detail::variant::void_; T17 = boost::detail::variant::void_; T18 = boost::detail::variant::void_; T19 = boost::detail::variant::void_; typename boost::add_reference<T>::type = CScriptID&]’ rpcrawtransaction.cpp:217:71: required from here /usr/include/boost/variant/get.hpp:178:5: error: invalid application of ‘sizeof’ to incomplete type ‘boost::STATIC_ASSERTION_FAILURE<false>’ BOOST_STATIC_ASSERT_MSG( ^ makefile.unix:217: recipe for target 'obj/rpcrawtransaction.o' failed make: *** [obj/rpcrawtransaction.o] Error 1 r@r:~/Transfercoin/src$
|
|
|
|
|
|
|
You can see the statistics of your reports to moderators on the "Report to moderator" pages.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
Infernum
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 24, 2017, 12:10:45 PM |
|
Debian 7 works through this without any compiling errors. Cryptoiskey also did a revised version of the Youtube video Yesterday with more info: https://www.youtube.com/watch?v=WXggprkVdnM&----------------------------------------------------------------------------- Error again,Ubuntu 16.04 ,4GB memory: ...T16 = boost::detail::variant::void_; T17 = boost::detail::variant::void_; T18 = boost::detail::variant::void_; T19 = boost::detail::variant::void_; typename boost::add_reference<T>::type = CScriptID&]’ rpcrawtransaction.cpp:217:71: required from here /usr/include/boost/variant/get.hpp:178:5: error: invalid application of ‘sizeof’ to incomplete type ‘boost::STATIC_ASSERTION_FAILURE<false>’ BOOST_STATIC_ASSERT_MSG( ^ makefile.unix:217: recipe for target 'obj/rpcrawtransaction.o' failed make: *** [obj/rpcrawtransaction.o] Error 1 r@r:~/Transfercoin/src$
|
|
|
|
galixxx
|
|
April 24, 2017, 02:44:58 PM |
|
I have 10K + TX in my wallet and would like to start a masternode. When entering masternode start <walletpassword> I get following message back:
not capable masternode: Could not find suitable coins!
I guess I am doing something wrong. Can somebady help me here? Thanks!
|
|
|
|
torig
|
|
April 24, 2017, 03:03:20 PM |
|
I have 10K + TX in my wallet and would like to start a masternode. When entering masternode start <walletpassword> I get following message back:
not capable masternode: Could not find suitable coins!
I guess I am doing something wrong. Can somebady help me here? Thanks! HERE http://txproject.io/#communityVideos NOW INSTALL MASTERNODE.
|
|
|
|
galixxx
|
|
April 24, 2017, 03:12:58 PM |
|
I have 10K + TX in my wallet and would like to start a masternode. When entering masternode start <walletpassword> I get following message back:
not capable masternode: Could not find suitable coins!
I guess I am doing something wrong. Can somebady help me here? Thanks! HERE http://txproject.io/#communityVideos NOW INSTALL MASTERNODE. Thank you. I followed the youtube instructions already. But I cant start the node and get the above message back.
|
|
|
|
AltScope
|
|
April 24, 2017, 09:15:28 PM |
|
I have 10K + TX in my wallet and would like to start a masternode. When entering masternode start <walletpassword> I get following message back:
not capable masternode: Could not find suitable coins!
I guess I am doing something wrong. Can somebady help me here? Thanks! HERE http://txproject.io/#communityVideos NOW INSTALL MASTERNODE. Thank you. I followed the youtube instructions already. But I cant start the node and get the above message back. check in coincontrol that you have an input of exactly 10k in your masternode address
|
|
|
|
Infibite Nit
Member
Offline
Activity: 66
Merit: 10
|
|
April 25, 2017, 03:52:45 AM |
|
Can anyone give me a current Masternode overview: how many TX coins needed, average monthly income, etc?
How many TX are people earning per masternode per day?
I average 2 x 0.5 per hour. So about 25 coins per day. 10k TX =1Masternode. Thanks! Is there consistent development going on? Any roadmap/good place to see progress. The website seems incomplete
|
|
|
|
galixxx
|
|
April 25, 2017, 08:59:17 AM |
|
I have 10K + TX in my wallet and would like to start a masternode. When entering masternode start <walletpassword> I get following message back:
not capable masternode: Could not find suitable coins!
I guess I am doing something wrong. Can somebady help me here? Thanks! HERE http://txproject.io/#communityVideos NOW INSTALL MASTERNODE. Thank you. I followed the youtube instructions already. But I cant start the node and get the above message back. check in coincontrol that you have an input of exactly 10k in your masternode address Thx got really good help in slack. My issue was to not transfered 10k in one shot. My mn is running since more 12h. :-)
|
|
|
|
USC Developer
Newbie
Offline
Activity: 40
Merit: 0
|
|
April 25, 2017, 11:46:03 AM |
|
We have come to masternode age , now all masternode coins are pumping
|
|
|
|
|
kingcrimson
Legendary
Offline
Activity: 1025
Merit: 1000
|
|
April 25, 2017, 01:23:05 PM |
|
Few updates for those who haven't joined the Slack yet
Nice news, and the panic dumpers and weak hands are already gone... most of us are here for the MN. So we just need some volume to crank up to the next tier.
|
|
|
|
No coNnecT
|
|
April 25, 2017, 06:35:29 PM |
|
I want to try to start two masternodes from one wallet. There is such instruction?
|
|
|
|
torig
|
|
April 25, 2017, 07:04:55 PM |
|
I want to try to start two masternodes from one wallet. There is such instruction?
1 IP= 1MN.
|
|
|
|
Infernum
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 25, 2017, 07:24:33 PM |
|
I want to try to start two masternodes from one wallet. There is such instruction?
If the two Masternodes are on VPS on separate IPs, yes Some video guides on the website: http://txproject.io/
|
|
|
|
kingcrimson
Legendary
Offline
Activity: 1025
Merit: 1000
|
|
April 26, 2017, 01:25:43 PM |
|
only 48 TX masternodes left for sale on bittrex, they're selling fast things could get interesting..
only about 40 left for sale, I suspect in May it will drop to 20-30.
|
|
|
|
trouser_cough
Newbie
Offline
Activity: 9
Merit: 0
|
|
April 26, 2017, 02:14:48 PM |
|
Please help!
Hello guys,
Brand new to Transfercoin and I'm really struggling to get the software up and running. So far I've tried and failed on a RPi3, Odroid C2 and in Linux Mint. I'm fairly new to Linux but usually find a guide online to get around problems like this but this time I'm completely lost and would really appreciate some help.
Whilst compiling from Github, after the command, 'sudo make -f makefile.unix # Headless transfer'
I get;
'g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -Wunused-function -Wunused-variable -fpermissive -Wconversion-null -g -DBOOST_SPIRIT_THREADSAFE -I/home/***/Desktop/transfercoin/src -I/home/***/Desktop/transfercoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DENABLE_WALLET -I/home/***/Desktop/transfercoin/src/secp256k1/include -I/home/***/Desktop/transfercoin/src/leveldb/include -I/home/***/Desktop/transfercoin/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp make: g++: Command not found makefile.unix:217: recipe for target 'obj/alert.o' failed make: *** [obj/alert.o] Error 127
( ive replaced a folder name with *** )
I get this error on all of the different systems and hardware that I'v tried. From Github I can see that, " Transfer uses libsecp256k1, libgmp, Boost1.55, OR Boost1.57, Openssl1.01p, Berkeley DB 4.8, QT5 to compile."
Is this where I'm going wrong? I have tried to install them but cannot and I guess they're not available in the repositories I have installed. Please can somebody offer some advice or where to easily locate all of these packages if this is indeed the problem?
Thanks in advance.
|
|
|
|
Infernum
Newbie
Offline
Activity: 42
Merit: 0
|
|
April 26, 2017, 04:10:12 PM |
|
Please help!
Hello guys,
Brand new to Transfercoin and I'm really struggling to get the software up and running. So far I've tried and failed on a RPi3, Odroid C2 and in Linux Mint. I'm fairly new to Linux but usually find a guide online to get around problems like this but this time I'm completely lost and would really appreciate some help.
Whilst compiling from Github, after the command, 'sudo make -f makefile.unix # Headless transfer'
I get;
'g++ -c -O2 -pthread -Wall -Wextra -Wno-ignored-qualifiers -Wformat -Wformat-security -Wno-unused-parameter -Wunused-function -Wunused-variable -fpermissive -Wconversion-null -g -DBOOST_SPIRIT_THREADSAFE -I/home/***/Desktop/transfercoin/src -I/home/***/Desktop/transfercoin/src/obj -DUSE_UPNP=0 -DUSE_IPV6=1 -DENABLE_WALLET -I/home/***/Desktop/transfercoin/src/secp256k1/include -I/home/***/Desktop/transfercoin/src/leveldb/include -I/home/***/Desktop/transfercoin/src/leveldb/helpers -DHAVE_BUILD_INFO -fno-stack-protector -fstack-protector-all -Wstack-protector -D_FORTIFY_SOURCE=2 -MMD -MF obj/alert.d -o obj/alert.o alert.cpp make: g++: Command not found makefile.unix:217: recipe for target 'obj/alert.o' failed make: *** [obj/alert.o] Error 127
( ive replaced a folder name with *** )
I get this error on all of the different systems and hardware that I'v tried. From Github I can see that, " Transfer uses libsecp256k1, libgmp, Boost1.55, OR Boost1.57, Openssl1.01p, Berkeley DB 4.8, QT5 to compile."
Is this where I'm going wrong? I have tried to install them but cannot and I guess they're not available in the repositories I have installed. Please can somebody offer some advice or where to easily locate all of these packages if this is indeed the problem?
Thanks in advance.
Hi, Edit: I misread the error. Did you follow the info on the video tutorial on Youtube? Link is on txproject.io Am on mobile at moment, so can't help much. But if you join the Slack and post in #support, me or someone else will help later Dan
|
|
|
|
trouser_cough
Newbie
Offline
Activity: 9
Merit: 0
|
|
April 27, 2017, 05:30:05 AM |
|
[/quote]
Hi,
Edit: I misread the error. Did you follow the info on the video tutorial on Youtube? Link is on txproject.io
Am on mobile at moment, so can't help much. But if you join the Slack and post in #support, me or someone else will help later Dan [/quote]
Thanks for the reply. I've looked at txproject.io and I can only see 3 Youtube videos and they relate to setting up a masternode in Windows only. I'll try to post this in the Slack.
|
|
|
|
BTC-BTC-BTC
Legendary
Offline
Activity: 1582
Merit: 1001
www.neutroncoin.com
|
|
April 27, 2017, 05:39:44 AM |
|
WOW. 101 MNs and growing.
|
|
|
|
torig
|
|
April 27, 2017, 05:44:15 AM Last edit: April 27, 2017, 02:08:52 PM by torig |
|
WE GO TO 590MN!!!
|
|
|
|
|