DGB DigiByte Qubit and Myriad-Groestl Suprnova Pools

[bakuon]

Is there a forum for Suprnova's DGB Skein pool?

What's up with the dashboard for the Skein pool? I'm getting coins from it, but the dashboard just never seems to update or load any of the graphs, even if I leave it running for more than 24 hours, with several page refreshes...

[Plumbus]

The reported hashrate in the pool dashboard is about half of my actual hashrate in ccminer. Is this just a reporting issue am I doing something wrong?

[duk3n]

The reported hashrate in the pool dashboard is about half of my actual hashrate in ccminer. Is this just a reporting issue am I doing something wrong?

Use static diff. Somewhere between .03 up to .128 should work fine depemd on the graphic card. I suggest .1 for gtx 1070

[Plumbus]

The reported hashrate in the pool dashboard is about half of my actual hashrate in ccminer. Is this just a reporting issue am I doing something wrong?

Use static diff. Somewhere between .03 up to .128 should work fine depemd on the graphic card. I suggest .1 for gtx 1070

Thanks, what about a rig with a 1080 and a 1070? Higher difficulty?

[duk3n]

The reported hashrate in the pool dashboard is about half of my actual hashrate in ccminer. Is this just a reporting issue am I doing something wrong?

Use static diff. Somewhere between .03 up to .128 should work fine depemd on the graphic card. I suggest .1 for gtx 1070

Thanks, what about a rig with a 1080 and a 1070? Higher difficulty?

.1 should be fine, run for few minutes , if is ok let it like that, if you have too many shares rise it , if are  less then 10 per minutes lower it down. Somewhere in between 20 30 shares per minute is good for the miner and also for the pool.

[ocminer]

Is there a forum for Suprnova's DGB Skein pool?

What's up with the dashboard for the Skein pool? I'm getting coins from it, but the dashboard just never seems to update or load any of the graphs, even if I leave it running for more than 24 hours, with several page refreshes...

Dashboard is now fixed

[Vladeg]

What port I should use at dgbs.suprnova.cc?

[ocminer]

What port I should use at dgbs.suprnova.cc?

5226

[Vladeg]

What port I should use at dgbs.suprnova.cc?

5226

And one more question. I can't put same wallet in different DGB pools. Is this bug?

[ocminer]

What port I should use at dgbs.suprnova.cc?

5226

And one more question. I can't put same wallet in different DGB pools. Is this bug?

No, you need a new address for every pool, this is a security measure

[ioglnx]

Hi Ocminer,

you should update the hint text about the algo at the mainpage.
It still shows qubit :-D Copycat issue I assume :-D

[theguvner]

Hey guys,

I'm mining dgb-skein on a 980Ti so trying to set the difficulty to around 0.05 but even using the below string it seems VARDIFF is still running?

ccminer --algo=skein -o stratum+tcp://dgbs.suprnova.cc:5226 -u *********.********* -p d=0.05

Am I doing something wrong? Do I have to set the password in My Workers to the same "d=0.05" ?

[JetstoBrazil]

connection to the myriad groestl pool keeps getting interrupted. was working fine for ages before today.. becoming a bit of a pain in the ass. Other pools work fine but i dont like other pools. Any way this can be fixed?

[ocminer]

connection to the myriad groestl pool keeps getting interrupted. was working fine for ages before today.. becoming a bit of a pain in the ass. Other pools work fine but i dont like other pools. Any way this can be fixed?

Should be fixed now !

[JetstoBrazil]

connection to the myriad groestl pool keeps getting interrupted. was working fine for ages before today.. becoming a bit of a pain in the ass. Other pools work fine but i dont like other pools. Any way this can be fixed?

Should be fixed now !

still getting disconnected

[ocminer]

connection to the myriad groestl pool keeps getting interrupted. was working fine for ages before today.. becoming a bit of a pain in the ass. Other pools work fine but i dont like other pools. Any way this can be fixed?

Should be fixed now !

still getting disconnected

Hmm just checked the logs and couldn't find any errors on https://dgbg.suprnova.cc ... :-( Whats the disconnect reason you have ? Can you access the pool still when you're disconnected ?

[JetstoBrazil]

connection to the myriad groestl pool keeps getting interrupted. was working fine for ages before today.. becoming a bit of a pain in the ass. Other pools work fine but i dont like other pools. Any way this can be fixed?

Should be fixed now !

still getting disconnected

Hmm just checked the logs and couldn't find any errors on https://dgbg.suprnova.cc ... :-( Whats the disconnect reason you have ? Can you access the pool still when you're disconnected ?

it does not give a reason. i can still access the pool yes.. it just drops the connection and reconnects pretty much right away but it resets the difficulty. 

[ssnova]

Hey guys, I need some help.

I'm trying to get SGminer 5.6.1 (windows) to work with Digibyte Myriad-Groestl Suprnova Pool.


I created a bat file that I put into the SGminer folder and here's the contents of it:


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe -I 20 -g 4 -w 128 -k myriadcoin-groestl --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw


However I get a few failure notices when I try to start it:

"
error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR

Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Re-check your configuration and try restarting.
"

Other notes:
I'm running 3 R9 Fury's and 1 Radeon Pro Duo with driver 16.32 on windows 7

[ssnova]

Hey guys, I need some help.

I'm trying to get SGminer 5.6.1 (windows) to work with Digibyte Myriad-Groestl Suprnova Pool.


I created a bat file that I put into the SGminer folder and here's the contents of it:


setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
sgminer.exe -I 20 -g 4 -w 128 -k myriadcoin-groestl --no-submit-stale -o stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw


However I get a few failure notices when I try to start it:

"
error: Clang front-end compilation failed!
Frontend phase failed compilation.
Error: Compiling CL to IR

Failed to init GPU thread 0, disabling device 0
Restarting the GPU from the menu will not fix this.
Re-check your configuration and try restarting.
"

Other notes:
I'm running 3 R9 Fury's and 1 Radeon Pro Duo with driver 16.32 on windows 7

Ok, through some trial and error I got pass this stage, however I'm still having issues, on suprnova it does not show a hash rating, nor is it getting any coins.

This is what my .bat files looks like now:

sgminer.exe -I 13 -w 128 -k myr-gr --no-submit-stale -o  stratum+tcp://dgbg.suprnova.cc:7978 -u worker.01 -p workerpw

This executes and runs, and everything as far as I can tell looks ok, but I'm not getting a hashrate on my pool(ran it for like 15 minutes), nor is it getting any coins, indicating that it's not mining for the pool.

Any ideas on what I might be doing wrong? Anything stand out that may be missing for my script?  Anyone running SGminer w/AMD cards successfully on Suprnova pool?  Also, what does the "-w 128" specify??

[qhead]

Sad to say but suprnova pools have turned to shit lately. I've a lot of miners and it happens more often than not that when I switch coin half of the workers can't get work from the pool. I had to switch to another dgb pool because of this crap and now mona has the same problem. Thank god it's been mostly zcash lately.

I don't know what's going on with the pools, overloaded servers or what but not very excited to point my workers to suprnova pools anymore.