Hi, I've installed bitcoin client on Ubuntu! What now??

[yrtrnc]

So I installed bitcoin-qt on Ubuntu 12.10 . How do I sync my new wallet ? How do I start my wallet??

Thanks

[1715160910]

1715160910

[1715160910]

1715160910

[1715160910]

1715160910

[mpx]

I would run bitcoind

bitcoind -daemon

you can then run commands from the api

[CIYAM]

So I installed bitcoin-qt on Ubuntu 12.10 . How do I sync my new wallet ? How do I start my wallet??

Thanks

You just need to start bitcoin-qt - it will automatically create a new wallet and start downloading the block chain (note that the latter step can take a very long time depending upon your internet connection and hardware).

While you are waiting for the block chain download you might want to start trying to work out your wallet "pass phrase" as this needs to be something very long (and best to be mixed with alpha-numeric and other symbols) and something you *cannot* forget (or your wallet becomes "read only").

[yrtrnc]

Thanks guys 

How do I start the syncing process.

Just type bitcoind -deamon in the terminal??

How do I know when its done???

[yrtrnc]

When I type bitcoind -deamon in the terminal I get an error:

Exception: St13runtime_error
CDB() : can't open database file wallet.dat, error 12
bitcoin in AppInit()

terminate called after throwing an instance of 'std::runtime_error'
 what():  CDB()  : can't open database file wallet.dat, error 12
Aborted (core dumped)

I opened .bitcoin folder and deleted everything except wallet.dat, and still no luck??

What am I doing wrong??

Thanks

[CIYAM]

When I type bitcoind -deamon in the terminal I get an error:

I think you'll find the argument should be -daemon rather than -deamon (although am not certain that this is the cause of your problem).

Exception: St13runtime_error
CDB() : can't open database file wallet.dat, error 12
bitcoin in AppInit()

terminate called after throwing an instance of 'std::runtime_error'
 what():  CDB()  : can't open database file wallet.dat, error 12
Aborted (core dumped)

For further information about the DB error you'll need to check the "debug.log" file.

[mpx]

Try 'bitcoin' in a terminal instead of 'bitcoind'

also try removing the wallet too (assuming you've got nothing in it!!!)

if all else fails, reinstall :

•sudo apt-get install python-software-properties
•sudo add-apt-repository ppa:bitcoin/bitcoin
•sudo apt-get install bitcoind

[yrtrnc]

Hi

Thanks for the input everyone..

So I deleted everything and installed as you said.

I wrote bitcoin in the terminal and nothing happened.. Then I wrote bitcoind and files started to appear in the .bitcoin file.

Thats about it?? How do I know that the wallet is syncing??

What do I do next???

I'm so N00BBBB

[yrtrnc]

Note that: Bitcoind is running in system monitor using 4-8 % cpu and 600megs of ram.. No gui is present???

[adamstgBit]

why do you need to run bitcoind?

run the GUI bitcoin-qt or better yet use http://blockchain.info/'s wallet service

of course you will need to print out paper wallets for your bitcoin savings account

https://www.bitaddress.org/bitaddress.org-v2.0-SHA1-c0300a88d2de421106560185e4916f4eee6ed9df.html

 

oh will you look at that, you can now print the nice bills!

but i will click the Hide art check box not to wast ink...

[yrtrnc]

Thanks a bunch mate,, turns out I was trying to run the wrong program..

Bitcoin wallet is now running 

why do you need to run bitcoind?

run the GUI bitcoin-qt or better yet use http://blockchain.info/'s wallet service

of course you will need to print out paper wallets for your bitcoin savings account

https://www.bitaddress.org/bitaddress.org-v2.0-SHA1-c0300a88d2de421106560185e4916f4eee6ed9df.html

 

oh will you look at that, you can now print the nice bills!

but i will click the Hide art check box not to wast ink...

[adamstgBit]

why do you need to run bitcoind?

run the GUI bitcoin-qt or better yet use http://blockchain.info/'s wallet service

of course you will need to print out paper wallets for your bitcoin savings account

https://www.bitaddress.org/bitaddress.org-v2.0-SHA1-c0300a88d2de421106560185e4916f4eee6ed9df.html

 

oh will you look at that, you can now print the nice bills!

but i will click the Hide art check box not to wast ink...

Thanks a bunch mate,, turns out I was trying to run the wrong program..

Bitcoin wallet is now running 

bitcoind is for doing things like automatic payouts and import private key

[yrtrnc]

Well, well

Now, I ran bitcoin-qt fine the first time and it seemed to be syncing ok. when I closed the program and re-opened it, it wont start anymore. And it says

A fatal error has occured. Bitcoin can no longer continue safely and will quit.

Exception: St13runtime_error
CDB() : can't open database file wallet.dat, error 12
bitcoin in Runaway exception.

 

[deepceleron]

Errors accessing wallet.dat as described above are likely from bitcoin (in one form or another) still running. Alternately, the wallet file could have been corrupted by attempting to run two different versions of Bitcoin which may concurrently access the same data directory.

Bitcoin takes a considerable amount of time to shut down after you tell it to. Bitcoin-qt (the full GUI version) will "close" when you press the close button, but it may still run in the background for a minute as it shuts down and closes the database files. Bitcoind (the daemon) may be running in a console window, but it doesn't need a window showing on your current desktop to be running.

In Ubuntu, press the superkey (Windows key), and type "System Monitor" and launch it. In the system monitor, check the processes tab to see if any copy or version of Bitcoin is running. If so you must close it and allow it to finish closing.

You do not state what version you are using or where you got it from. Either run bitcoin-qt extracted from the Sourceforge Bitcoin release bitcoin-0.7.1-linux.tar.gz (bitcoin.org -> Linux version), or follow these instructions:

Ubuntu Linux users can use the "Personal Package Archive" (PPA) maintained by Matt Corallo to automatically keep up-to-date. Just type:
sudo apt-add-repository ppa:bitcoin/bitcoin
sudo apt-get update

in your terminal, then install the bitcoin-qt package:
sudo apt-get install bitcoin-qt

You should first remove any bitcoind or older version you have installed. Additionally, if you have never used your wallet or the addresses in it, a good fresh start would be to remove the .bitcoin directory in your home directory, which is where all data files for Bitcoin are stored.

After installing the newest version, it can be launched by typing bitcoin-qt in a terminal window if it is not added to your menu bar. Then let it run for the day or two it requires to download 4GB of data.

[biddicoin]

strange.... I had absolutely no problems, just installed - doubleclick - ready

[deepceleron]

If my instructions are followed and there is still an error message when launching the lastest version of Bitcoin from a fresh start, and you need the addresses or money in the wallet, a new command was added in Bitcoin 0.7.1 which you can run like this from a terminal window:

bitcoin-qt -salvagewallet

It will do a low level scan and recovery for wallet addresses and keys, and create a new wallet with this data. Bitcoin-qt will take a considerable amount of time before the GUI appears if you start using this command.

strange.... I had absolutely no problems, just installed - doubleclick - ready

It would be helpful for the discussion if you described what OS and which installer you used to have such an awesome experience that it was worth regaling in the thread of someone having problems...

[yrtrnc]

Well, thanks for the tip.

I installed it in a bit of a different way to what you said.

I added the ppa to software sources and then downloaded and installed it from the software center.

Thanks a bunch for all the enlightening info.

Im still trying to get the hang of ubuntu, I feel it works in mysterious ways.

I have reinstalled it in the way you described and it is syncing, fingers crossed and hope it works 

Thanks alot!

Errors accessing wallet.dat as described above are likely from bitcoin (in one form or another) still running. Alternately, the wallet file could have been corrupted by attempting to run two different versions of Bitcoin which may concurrently access the same data directory.

Bitcoin takes a considerable amount of time to shut down after you tell it to. Bitcoin-qt (the full GUI version) will "close" when you press the close button, but it may still run in the background for a minute as it shuts down and closes the database files. Bitcoind (the daemon) may be running in a console window, but it doesn't need a window showing on your current desktop to be running.

In Ubuntu, press the superkey (Windows key), and type "System Monitor" and launch it. In the system monitor, check the processes tab to see if any copy or version of Bitcoin is running. If so you must close it and allow it to finish closing.

You do not state what version you are using or where you got it from. Either run bitcoin-qt extracted from the Sourceforge Bitcoin release bitcoin-0.7.1-linux.tar.gz (bitcoin.org -> Linux version), or follow these instructions:

Ubuntu Linux users can use the "Personal Package Archive" (PPA) maintained by Matt Corallo to automatically keep up-to-date. Just type:
sudo apt-add-repository ppa:bitcoin/bitcoin
sudo apt-get update

in your terminal, then install the bitcoin-qt package:
sudo apt-get install bitcoin-qt

You should first remove any bitcoind or older version you have installed. Additionally, if you have never used your wallet or the addresses in it, a good fresh start would be to remove the .bitcoin directory in your home directory, which is where all data files for Bitcoin are stored.

After installing the newest version, it can be launched by typing bitcoin-qt in a terminal window if it is not added to your menu bar. Then let it run for the day or two it requires to download 4GB of data.

[yrtrnc]

Ok, so I installed it again and restarted the syncing as you know.

about half hour in to it , it stops and says : "WARNING: Displayed transactions may not be correct!  You may need to upgrade, or other nodes may need to upgrade."

Any ideas??

[nomnomnom]

Ok, so I installed it again and restarted the syncing as you know.

about half hour in to it , it stops and says : "WARNING: Displayed transactions may not be correct!  You may need to upgrade, or other nodes may need to upgrade."

Any ideas??

You can check $HOME/.bitcoin/debug.log to see if something weird is going on.
Maybe you are just connected to some nodes that are not fully updated with the rest of the network,
you could try to connect to a hubnode ( http://blockchain.info/hub-nodes ) until you are fully synced.

To do that you can launch bitcoin-qt from the commandline like this:

Code:

bitcoin-qt -connect=5.9.24.81

[yrtrnc]

Here is my log file. I am running 0.7.1. I have cut the log a bit short.

Thanks

ERROR: FetchInputs() : 5b2febc48a mempool Tx prev not found a5d15e1498 stored orphan tx 5b2febc48a (mapsz 5613) received block 00000000000002e174e6 ProcessBlock: ORPHAN BLOCK, prev=00000000000007328218 ERROR: FetchInputs() : fafa937e40 mempool Tx prev not found 4578de4640 stored orphan tx fafa937e40 (mapsz 5614) Flushed 10661 addresses to peers.dat  246ms received block 00000000000002dd859a ProcessBlock: ORPHAN BLOCK, prev=00000000000002e174e6 Added 1 addresses from 94.179.214.34: 13 tried, 10648 new ERROR: FetchInputs() : 955e361a1a mempool Tx prev not found 6e08b7388c stored orphan tx 955e361a1a (mapsz 5615) ERROR: FetchInputs() : 1d5d5ac640 mempool Tx prev not found 52cd767862 stored orphan tx 1d5d5ac640 (mapsz 5616) ERROR: FetchInputs() : 7b2dcce78d mempool Tx prev not found 5b2febc48a stored orphan tx 7b2dcce78d (mapsz 5617) received block 00000000000002516ec0 ProcessBlock: ORPHAN BLOCK, prev=00000000000002dd859a ERROR: FetchInputs() : 23f9cd3e91 mempool Tx prev not found d281c0a3e2 stored orphan tx 23f9cd3e91 (mapsz 5618) ERROR: FetchInputs() : 6e9e03ae73 mempool Tx prev not found 5b2febc48a stored orphan tx 6e9e03ae73 (mapsz 5619) received block 0000000000000294a1bc ProcessBlock: ORPHAN BLOCK, prev=00000000000002516ec0 ERROR: FetchInputs() : 9666265669 mempool Tx prev not found fafa937e40 stored orphan tx 9666265669 (mapsz 5620) Added 1 addresses from 173.76.177.60: 13 tried, 10648 new ERROR: FetchInputs() : 5e07d9b38c mempool Tx prev not found 5b2febc48a stored orphan tx 5e07d9b38c (mapsz 5621) ERROR: FetchInputs() : 3f9a3d8ee2 mempool Tx prev not found 5b2febc48a stored orphan tx 3f9a3d8ee2 (mapsz 5622) ERROR: FetchInputs() : a993dd9d99 mempool Tx prev not found 4551f0e1cd stored orphan tx a993dd9d99 (mapsz 5623) ERROR: FetchInputs() : fd88eb3179 mempool Tx prev not found 5b2febc48a stored orphan tx fd88eb3179 (mapsz 5624) received block 000000000000066ecfe5 ProcessBlock: ORPHAN BLOCK, prev=0000000000000294a1bc Added 1 addresses from 173.76.177.60: 13 tried, 10649 new received block 000000000000010fa885 ProcessBlock: ORPHAN BLOCK, prev=000000000000066ecfe5 received block 00000000000004c689d9 ProcessBlock: ORPHAN BLOCK, prev=000000000000010fa885 ERROR: FetchInputs() : 879c40d7f5 mempool Tx prev not found 1d5d5ac640 stored orphan tx 879c40d7f5 (mapsz 5625) ERROR: FetchInputs() : 4a0138c922 mempool Tx prev not found e676005a6d stored orphan tx 4a0138c922 (mapsz 5626) received block 000000000000045c31bb ProcessBlock: ORPHAN BLOCK, prev=00000000000004c689d9 received block 000000000000051c24db ProcessBlock: ORPHAN BLOCK, prev=000000000000045c31bb received block 000000000000047ffa72 ProcessBlock: ORPHAN BLOCK, prev=000000000000051c24db ERROR: FetchInputs() : 6fc3777ee6 mempool Tx prev not found 2203f90fcb stored orphan tx 6fc3777ee6 (mapsz 5627) ERROR: FetchInputs() : a5c007a181 mempool Tx prev not found a993dd9d99 stored orphan tx a5c007a181 (mapsz 5628) received block 000000000000019b5080 ProcessBlock: ORPHAN BLOCK, prev=000000000000047ffa72 Flush(false) blkindex.dat refcount=0 ThreadSocketHandler exited ThreadMessageHandler exited ipcThread exited blkindex.dat checkpoint ThreadMapPort exited blkindex.dat closed wallet.dat refcount=0 wallet.dat checkpoint wallet.dat detach wallet.dat closed DBFlush(false) ended            1087ms StopNode() ThreadOpenConnections exited Flushed 10662 addresses to peers.dat  560ms Flush(true) DBFlush(true) ended               0ms Bitcoin exited Bitcoin version v0.7.1.0-geb49457-beta () Using OpenSSL version OpenSSL 1.0.1c 10 May 2012 Startup time: 30/10/12 18:59:17 Default data directory /home/yr/.bitcoin Used data directory /home/yr/.bitcoin dbenv.open LogDir=/home/yr/.bitcoin/database ErrorFile=/home/yr/.bitcoin/db.log Loading block index... LoadBlockIndex(): hashBestChain=0000000034bd1e0953a3  height=43788  date=04/03/10 20:29:39 Verifying last 2500 blocks at level 1  block index           18996ms Loading wallet... ************************ EXCEPTION: St13runtime_error        CDB() : can't open database file wallet.dat, error 12        bitcoin in Runaway exception        EnvShutdown exception: Invalid argument (22)

[OpenYourEyes]

yrtrnc:
If I was, I'd do away with using bitcoin-qt, or the terminal based bitcoind (god knows why some one suggested that for a self proclaimed newbie).

Use some thing like Electrum (http://electrum-desktop.com/download), I've never used it, but it has good reviews from people here.
The major benefit from using it is that you don't have to download the blockchain (which could take hours or days); it gets all the information it needs it real time from the Internet.

Probably best to remove the bitcoin directories before you install it (just to avoid confusion later on): #> rm -rf ~/.bitcoin
and also remove bitcoin-qt and bitcoind just in case the bitcoind service has been set to start on bootup.

[usdtocny]

now get some free bitcoins

https://bitcointalk.org/index.php?topic=90718.0