jstefanop (OP)
Legendary
Offline
Activity: 2162
Merit: 1401
|
|
April 18, 2016, 06:46:13 PM |
|
Yea sorry guys the sick issue is on my to-do list since I knew people would have a problem with it with var diff pools. I just figured most pools have options for really low diff or can be set manually. I guess I was wrong.
The problem with the watchdog logic is that it was originally written for GPU miners, and was designed for locked up GPU mining threads. A lot of that logic has to be rewritten for ASICs, and I was talking with Luke-jr about it but it was a lot of work at the time so never got around to it. At the very least Ill uploaded compiled version with longer timeouts as a "dirty" work around.
BTW adding a low diff port takes a pool operator a couple minutes and a few lines of code to do, so I would email them and tell them if its possible to set a port for low diff.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2162
Merit: 1401
|
|
April 18, 2016, 06:58:14 PM |
|
so i was checking these things out on a thermal camera and i think its the heatsink. the chips are around 150F or so but the heatsinks are like 80F you can clearly see the heatsinks are not as hot as the board.. and the chip is the hottest. i might order some tiny heatsinks for the top of the chips and then double space them on the usb hub.. that means only 3 can fit per superbpag 150F is nice and cool for these...I wouldn't worry unless temps go above 80c/175F on the ASIC itself. Of course it doesn't hurt to have more cooling...cooler ASIC=more efficient.
|
|
|
|
VictorGT
|
|
April 20, 2016, 08:44:20 AM |
|
Yea sorry guys the sick issue is on my to-do list since I knew people would have a problem with it with var diff pools. I just figured most pools have options for really low diff or can be set manually. I guess I was wrong.
The problem with the watchdog logic is that it was originally written for GPU miners, and was designed for locked up GPU mining threads. A lot of that logic has to be rewritten for ASICs, and I was talking with Luke-jr about it but it was a lot of work at the time so never got around to it. At the very least Ill uploaded compiled version with longer timeouts as a "dirty" work around.
BTW adding a low diff port takes a pool operator a couple minutes and a few lines of code to do, so I would email them and tell them if its possible to set a port for low diff. Great!!!. I was reading the windows-build.txt at BFGminer folder, in order to do it by myself... Not sure if possible for me... Please let us know when new binaries are available. I will like a lot to test MLs on more pools... Thanks.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2162
Merit: 1401
|
|
April 25, 2016, 06:55:12 PM |
|
FYI if you guys want a 100% sure way to test whether its a pool issue or something wrong with your computer/setup just run the script file with the --benchmark flag. This sets bfgminer in benchmark mode and does not rely on pool diff settings to test your setup. It essentially generates local work using a VERY low diff(lower than what a pool can do). This will produce about 30-60 shares a SECOND based on what frequency you set, so its a sure proof way to test everything is working correctly hardware side. I use a variation of this method to test your moonlanders before I ship them out. It allows me to have the stick return thousands of shares in the order of minutes, which would normally take a pool hours/days to do, and can quickly identify issues with the ASIC/stick. I haven't posted this before because it completely stresses out your system/stick, so don't try this on a RPi for example and get worried if something freezes up
|
|
|
|
|
ManeBjorn
Legendary
Offline
Activity: 1288
Merit: 1004
|
|
April 29, 2016, 05:40:15 AM |
|
Cool I will try a couple of them tomorrow.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
April 30, 2016, 09:22:05 PM |
|
can someone tell me what the rated voltage and speed is for this chip? its the alcheminer scrypt-1?
i decided to try to crank these up, im at 304 speed at around .9v looking at the pot i put the flat spot on the left |O with the usb pointing down.
a few give me hwe but some are at 0..
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 01, 2016, 12:58:15 AM |
|
out of the 8 of these i got. one is acting strange.. the red and orange lights stays on all of the time. (looking at the 8 i have 2 do this) it also produces 10x more hwe then the other 7. ive settled on speed 288 with them all at or around .9v 6 of the 8 give zero hwe.. 1 gives about 10 an hour and this one is 100+ any ideas?
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 02, 2016, 06:24:13 PM Last edit: May 02, 2016, 07:03:45 PM by aarons6 |
|
it seems 2 of my sticks are holding me back. i can run 6 of them at 320 @ .9v with only 1 or 2 hwe per 10 minutes or so (i still cant get them to run very long before one drops down to 0) and they are spot on the rated speed.. 320x2.77= 886.4 if i add the other 2 they produce about 10 or so hwe per minute and they only run around 500kh/s lowering those 2 to around 256 make them happy. there doesnt seem to be a way to set those 2 at 256 while the others are at 320 on the same hub.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2162
Merit: 1401
|
|
May 02, 2016, 06:39:32 PM |
|
it seems 2 of my sticks are holding me back. i can run 6 of them at 320 @ .9v with only 1 or 2 hwe per hour and they are spot on the rated speed.. 320x2.77= 886.4 if i add the other 2 they produce about 10 or so hwe per minute and they only run around 500kh/s lowering those 2 to around 256 make them happy. there doesnt seem to be a way to set those 2 at 256 while the others are at 320 on the same hub. Check out the FAQ, instructions are there and about every other question people keep asking over and over
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 05, 2016, 10:57:41 PM |
|
Anyone have a list of what USB hubs these will run correct speeds on? Really want to get these little frustrating things working.
I am running 8 on 2 superbpag 7 port hubs. They are running at 304 and take amlost 1.6a and are set to about .9v Most hubs cap out at .9a which is only good for around 240 or so.
|
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 06, 2016, 06:00:27 AM |
|
i have that hub and it wont even initialize mine.. the blue lights on the hub just blink?
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 06, 2016, 06:01:38 AM |
|
Anyone have a list of what USB hubs these will run correct speeds on? Really want to get these little frustrating things working.
I am running 8 on 2 superbpag 7 port hubs. They are running at 304 and take amlost 1.6a and are set to about .9v Most hubs cap out at .9a which is only good for around 240 or so. Is this on a linux os? I am going to try some hubs that wouldn't work on my linux os on a windows build I am setting up tonight/ tomorrow. yes im running them on linux with minera.. but that hub also works in windows 10 with no issues.. besides the regular issues.. i cant get them to run for more then 30 minutes before they start shutting off one by one.
|
|
|
|
cloudnthings
Member
Offline
Activity: 77
Merit: 10
|
|
May 06, 2016, 08:15:37 PM |
|
Hi guys, Awesome job jstefanop. Is this still available for purchase?
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2162
Merit: 1401
|
|
May 06, 2016, 08:20:38 PM |
|
Hi guys, Awesome job jstefanop. Is this still available for purchase?
Im sold out of the last batch...my resellers Asicpuppy and holybitcoin (bitshopper.de if your in europe) might still have a few left.
|
|
|
|
Guruclef
Member
Offline
Activity: 97
Merit: 10
|
|
May 10, 2016, 05:24:00 PM |
|
Anyone have a list of what USB hubs these will run correct speeds on? Really want to get these little frustrating things working.
Mine run OK with an Orico 10 port metal hub. I also run a couple of gekkoscience compac on the same hub.
|
|
|
|
jstefanop (OP)
Legendary
Offline
Activity: 2162
Merit: 1401
|
|
May 10, 2016, 08:21:43 PM |
|
Hi guys, Awesome job jstefanop. Is this still available for purchase?
Im sold out of the last batch...my resellers Asicpuppy and holybitcoin (bitshopper.de if your in europe) might still have a few left. Are you working on new chip units or is that still an issue with getting the chips at a correct price? Chip is no longer produced and its a bit outdate now. Im developing a new miner based on the A4 chip that will probably be ready in a month or two.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 11, 2016, 09:09:48 PM |
|
i think these moonlanders would work a lot better if you modifiy the 5v line and use molex power..
i have a feeling they are overloading the usb.. even the superbpag ones.
|
|
|
|
aarons6
Legendary
Offline
Activity: 1736
Merit: 1006
|
|
May 11, 2016, 09:39:31 PM |
|
i think these moonlanders would work a lot better if you modifiy the 5v line and use molex power..
i have a feeling they are overloading the usb.. even the superbpag ones.
How would we get these running in a micro pc setup, usb to molex would still share the issue wouldn't they? yeah you would have to get a 5v line and wire it straight to the board.. richbc is doing it with the compacs.. he has one running at 450..
|
|
|
|
|