[ANN][PIVX] - PRIVATE INSTANT VERIFIED TRANSACTION - PROOF OF STAKE - ZEROCOIN

[4x13]

Need more people to turn on Obfuscation, minimum of 500 DNET for 2 rounds Please....

[NotMyFarm]

Need more people to turn on Obfuscation, minimum of 500 DNET for 2 rounds Please....

how to /Mac ?
i am set for 2 rounds - 500
but when i press 'start mix' nothing happens

[Haunebu81]

Need more people to turn on Obfuscation, minimum of 500 DNET for 2 rounds Please....

I'll do it as soon as my new wallet gets some connections. 30 min and still 0 active connections.

[EcoChavCrypto]

I am not getting any connections on the v2.1.2.2 wallet.  I need to re-sync the blockchain after an error, I added connect=coin-server.com to the darknet.conf but am still not getting any connections, any ideas?

[berron]

Need more people to turn on Obfuscation, minimum of 500 DNET for 2 rounds Please....

Started here as you asked. Some questions:

I need to do anything more than change ofuscation amount and rounds and push the button?

Why the button doesn't look like a button?

Where is the option to stop the anoying sound that happens everytime a transaction happens? I REALLY need it...  

[Haunebu81]

I am not getting any connections on the v2.1.2.2 wallet.  I need to re-sync the blockchain after an error, I added connect=coin-server.com to the darknet.conf but am still not getting any connections, any ideas?

Same here. When I use files from the previous wallet, I get connections quickly, but the chain doesn't sync.

[berron]

I have connections, some of them to 2.1.2.1 wallets and some of them to 2.1.2.2 wallets. Is this correct?

And when you have time, devs, could you give a little explanation of what obfuscation is and how it works for dummies?

Thanks

[berron]

I have already updated my controller wallet and my MN's to v2.1.2.2, but when I try to restart the masternodes I receive the correct message of:

{
    "alias" : "BMN3",
    "result" : "successful"
}

And when I go to my MN and type

./darknet-cli masternode status

I receive this message

{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "[::]:0",
    "status" : "Not capable masternode: Hot node, waiting for remote activation."
}

Any thoughts???

EDIT: And when I ask for masternode list-conf in my MN's controller wallet all of them appear as ENABLED.

[Haunebu81]

I have already updated my controller wallet and my MN's to v2.1.2.2, but when I try to restart the masternodes I receive the correct message of:

{
    "alias" : "BMN3",
    "result" : "successful"
}

And when I go to my MN and type

./darknet-cli masternode status

I receive this message

{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "[::]:0",
    "status" : "Not capable masternode: Hot node, waiting for remote activation."
}

Any thoughts???

EDIT: And when I ask for masternode list-conf in my MN's controller wallet all of them appear as ENABLED.

Have you double checked that the genkey and IP addresses match in the masternode.conf and both are fully sync'd?

[berron]

I have already updated my controller wallet and my MN's to v2.1.2.2, but when I try to restart the masternodes I receive the correct message of:

{
    "alias" : "BMN3",
    "result" : "successful"
}

And when I go to my MN and type

./darknet-cli masternode status

I receive this message

{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "[::]:0",
    "status" : "Not capable masternode: Hot node, waiting for remote activation."
}

Any thoughts???

EDIT: And when I ask for masternode list-conf in my MN's controller wallet all of them appear as ENABLED.

Have you double checked that the genkey and IP addresses match in the masternode.conf and both are fully sync'd?

Of course, masternode.conf file has not been changed in my controller wallet and the same for darknet.conf in my MN's. And ./darknet-cli getinfo gives me the same block in controller wallet and MN's, same as http://178.254.23.111/~pub/DN/DN_Info.html.

[jakiman]

If everything checks out, try stopping the masternode's wallet, then restart it again.
I had the same issue and that resolved it. Seems it wasn't just updating its status.

[jakiman]

I have connections, some of them to 2.1.2.1 wallets and some of them to 2.1.2.2 wallets. Is this correct?

And when you have time, devs, could you give a little explanation of what obfuscation is and how it works for dummies?
Thanks

Yes, it's okay to connect to both versions.

As for obfuscation, I think it was explained before but I'm still trying to find it. Here's one I found though.
https://bitcointalk.org/index.php?topic=1262920.msg16041350#msg16041350

[4x13]

Ok, Everyone, Sorry for the Delay.. I would Like to Keep Pushing forward getting DarkNet added to CoinPayments, and Our Giveaway. As we need to make a slight change to the rules involving posting information here on BCT as they say it violates their rules of conduct. So Please continue Tweeting the information as originally requested, and PM me the tx information or you can email it to me 's3v3nh4cks @ gmail'

So to recap the rules;

- each vote placed for DarkNet (DNET) to get added to Coinpayments.net is equal to 1 vote, vote as many times as you like and as often as you like. This giveaway ends when DarkNet is added to CoinPayments.

- PM or email me your BCT username and TX ID (DO NOT POST IT HERE)


PRIZE is a Stakebox with the DarkNet wallet preinstalled and 10K DNET ready to run a Masternode (or) Stake. (Dnet will be sent by me once you provide me your DNET address after the end of the Giveaway and the TX ID will be posted for all to verify)

To kick things off, I Will match any vote that is Placed between now and the end of 9/11 (Without registering for the giveaway of course). I will tally up the votes based on the dates of the TX ID's and submit my matching votes on 9/12

Thanks to everyone who have brought us this far, lets see this to completion. I estimate we need around 815 total votes.

https://www.coinpayments.net/vote

s3v3n

[4x13]

I have connections, some of them to 2.1.2.1 wallets and some of them to 2.1.2.2 wallets. Is this correct?

And when you have time, devs, could you give a little explanation of what obfuscation is and how it works for dummies?
Thanks

Yes, it's okay to connect to both versions.

As for obfuscation, I think it was explained before but I'm still trying to find it. Here's one I found though.
https://bitcointalk.org/index.php?topic=1262920.msg16041350#msg16041350

Obfuscation is a service that uses the masternodes to mix your Dnet with others who also enable Obfuscation to obscure the origins of the original coins. 2 - 4 rounds provides decent mixing, while 8 rounds gets you to the point that someone would have to be pretty damned determined to trace out the entire string of transactions from all the pieces of all the monetized segments of the coins you have chosen to mix. Don't get me wrong, it is still traceable if you are determined, but very difficult presently.

When you enable this function, you can go into your coin control, and see how the lot of DNET has been broken up into certain sized segments, these will be traded many times with others also running Obfuscation, making it very difficult to trace as all the inputs/outputs will be the same monetary size.

[mikegi]

Need more people to turn on Obfuscation, minimum of 500 DNET for 2 rounds Please....

Maybe a bit more explanation if non-default setting are needed and if restarting is needed.

I would like to... I guess it is not so simple....

Looking at the help in the cli...

darknet-cli help obfuscation
obfuscation <darknetaddress> <amount>
darknetaddress, reset, or auto (AutoDenominate)<amount> is a real and will be rounded to the next 0.1

The help for darknetd says talks about "automated obfuscation",

 -enableobfuscation=<n>          Enable use of automated obfuscation for funds stored in this wallet (0-1, default: 0)

So I would guess that one could manually enable obfuscate some  coins from the CLI without any change or restart... but no...

$ darknet-cli obfuscation Dabc123abc123abc123zzzzzzzzzz 500
error: {"code":-1,"message":"value is type str, expected real"}


Am I doing something wrong?

[labuan]

DNET in polo https://twitter.com/Darknet_Crypto/status/774014835889549312
btw how to claim giveaway dnet dev?

[mikegi]

I have already updated my controller wallet and my MN's to v2.1.2.2, but when I try to restart the masternodes I receive the correct message of:

{
    "alias" : "BMN3",
    "result" : "successful"
}

And when I go to my MN and type

./darknet-cli masternode status

I receive this message

{
    "vin" : "CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 4294967295), coinbase )",
    "service" : "[::]:0",
    "status" : "Not capable masternode: Hot node, waiting for remote activation."
}

Any thoughts???

EDIT: And when I ask for masternode list-conf in my MN's controller wallet all of them appear as ENABLED.

I restarted my wallet/controller with the new version first. Maybe 30 minutes later, restarted the some masternodes with the new version.

The stayed in the same state. (Not capable masternode: Hot node, waiting for remote activation.) for about an hour so I ran start-alias ... from the controller and then the state changed.

Information from the wallet/controller is based on information is has last received from the masternode... and I think that after it doesn't hear from the masternode after a certain amount of time, then the masternode changes to the Missing state.

[4x13]

DNET in polo https://twitter.com/Darknet_Crypto/status/774014835889549312
btw how to claim giveaway dnet dev?

Read https://bitcointalk.org/index.php?topic=1262920.msg16189608#msg16189608

[4x13]

Need more people to turn on Obfuscation, minimum of 500 DNET for 2 rounds Please....

Maybe a bit more explanation if non-default setting are needed and if restarting is needed.

I would like to... I guess it is not so simple....

Looking at the help in the cli...

darknet-cli help obfuscation
obfuscation <darknetaddress> <amount>
darknetaddress, reset, or auto (AutoDenominate)<amount> is a real and will be rounded to the next 0.1

The help for darknetd says talks about "automated obfuscation",

 -enableobfuscation=<n>          Enable use of automated obfuscation for funds stored in this wallet (0-1, default: 0)

So I would guess that one could manually enable obfuscate some  coins from the CLI without any change or restart... but no...

$ darknet-cli obfuscation Dabc123abc123abc123zzzzzzzzzz 500
error: {"code":-1,"message":"value is type str, expected real"}


Am I doing something wrong?

if you are trying to run the Obfuscation purely from the daemon file, you need to add certain entries into your darknet.conf file. for example;

enableobfuscation=1
obfuscationrounds=2
anonymizedarknetamount=500

you will need to restart the daemon for these settings to take effect. (Also after changing them)

[4x13]

@nyteo please pm or email me that info and delete your post. You can't post that info here.