[ANN][PIVX] - PRIVATE INSTANT VERIFIED TRANSACTION - PROOF OF STAKE - ZEROCOIN

[jakiman]

I've now got all my masternodes & wallets back on the right chain.

and I can confirm that $DNET deposits & withdrawals are working on #Bittrex now.
But as always, it's best to make a small test transaction before doing bigger ones.

P.S. I also now have access to the official @Darknet_Crypto twitter account.

[1713955564]

1713955564

[1713955564]

1713955564

[NotMyFarm]

I've now got all my masternodes & wallets back on the right chain.

and I can confirm that $DNET deposits & withdrawals are working on #Bittrex now.
But as always, it's best to make a small test transaction before doing bigger ones.

P.S. I also now have access to the official @Darknet_Crypto twitter account.

MN's just restart ?

[jakiman]

MN's just restart ?

Some of them were just restarts, some were already on the right chain after I left them for few hours.
But those which were on the wrong chain had to be resynced using a blockchain backup I had made.

Code:

addnode=108.61.151.69
addnode=173.245.158.8
bantime=50

[FogHorn_LegHorn]

damn these forks are killing this coin. Have you heard of checkpoints? use em. make it work. wow. maybe start over since code is bunk. this coin forks every single day. Capice

??

talk about beating a dead horse...........................................this coin is it.

[jakiman]

So are people having issues with forked chain still? Yesterday's incident was due to a minor code bug.
But it has been rectified and chain is stable again. I've written a quick guide below on how to check.

How to check that you are on the correct chain

1. Go to this MN info page and note the block number & its hash:
http://178.254.23.111/~pub/DN/DN_masternode_payments_stats.html

2. Now go to your wallet and from the CLI / console, run "./darknet-cli getinfo" or "getinfo"

3. Ensure that your block number is at or just few blocks ahead of the one on the MN info page.
- If your wallet is behind that block, try restarting the wallet via "./darknet-cli stop" then "./darknetd" (if Windows, just close/relaunch)
- Then wait few minutes, then check tge getinfo output again. If the block doesn't move and it's behind still, then go to step 5.

4. If your wallet shows same block or just few infront, try running "./darknet-cli getblockhash xxxxxx" or "getblockhash xxxxxx".
- Replace xxxxxx with the block number shown on the MN info page. This will return a hash output.
- Make sure this hash matches the hash shown on the MN info page for that same block. If it does, you are on the right chain!
- But if you don't have 2 addnode IPs (below) & bantime=50 in your conf file, it is recommended to add them & restart it still.

5. If the hash for the same block does NOT match, then you are on the wrong chain. You will need to resync the blockchain.
- You need to stop the wallet, then delete the blocks & chainstate folders in your blockchain folder.
- Make sure your darknet.conf file has only the following 2 addnodes IP addresses.
- Also add the line bantime=50 to the bottom.

addnode=108.61.151.69
addnode=173.245.158.8
bantime=50

6. Then either replace them with a known good backup copy you made then restart the wallet or just restart the wallet to resync from scratch.
- To backup a good copy of the blockchain, you just need to copy the 2 folders (blocks & chainstate) while the wallet is not running.

7. Wait till it is resynced then repeat the above steps to check.

[kokokoin]

Everything working good for now. 1009 masternodes online, anybody remembers ATH of masternode count?

[berron]

Everything working good for now. 1009 masternodes online, anybody remembers ATH of masternode count?

If you enter in the MN info web and go to count all time, you have it there. I think it was 1075 or similar. I'm waiting for a rebel server repaired to put another one.

[ccminer.net]

Sorry guys I didn't get if you must be a MN in order to stake?

[kokokoin]

Sorry guys I didn't get if you must be a MN in order to stake?

No, masternodes can't stake, only regular nodes.

[DRPD]

Sorry guys I didn't get if you must be a MN in order to stake?

not sure what you mean
for staking you just need coins in your wallet, you don't have to run a mn
coins reserved for mn can't stake (see answer above)

[ccminer.net]

Sorry guys I didn't get if you must be a MN in order to stake?

not sure what you mean
for staking you just need coins in your wallet, you don't have to run a mn
coins reserved for mn can't stake (see answer above)

Thank you for the reply.
If you can could you please tell me what is the benefit to run a MN and where I can get infos about staking rate, stake reward, coin age and stuff like that.
On presstab it is not clear, there I can see something like 0 DNET stake reward 0 days age 

[DRPD]

Sorry guys I didn't get if you must be a MN in order to stake?

not sure what you mean
for staking you just need coins in your wallet, you don't have to run a mn
coins reserved for mn can't stake (see answer above)

Thank you for the reply.
If you can could you please tell me what is the benefit to run a MN and where I can get infos about staking rate, stake reward, coin age and stuff like that.
On presstab it is not clear, there I can see something like 0 DNET stake reward 0 days age  

you get better rewards for masternodes. atm:
Reward for last Block: 40.00 DNET
Reward from last Block for Miners/Stakers: 13.00 DNET
Reward from last Block for Masternodes: 27.00 DNET

this will change you can check rewards and splitting here: http://178.254.23.111/~pub/DN/DN_masternode_payments_stats.html
also read the first post for more info and PoS reward breakdown

afaik there is no coin age

[ccminer.net]

Sorry guys I didn't get if you must be a MN in order to stake?

not sure what you mean
for staking you just need coins in your wallet, you don't have to run a mn
coins reserved for mn can't stake (see answer above)

Thank you for the reply.
If you can could you please tell me what is the benefit to run a MN and where I can get infos about staking rate, stake reward, coin age and stuff like that.
On presstab it is not clear, there I can see something like 0 DNET stake reward 0 days age  

you get better rewards for masternodes. atm:
Reward for last Block: 40.00 DNET
Reward from last Block for Miners/Stakers: 13.00 DNET
Reward from last Block for Masternodes: 27.00 DNET

this will change you can check rewards and splitting here: http://178.254.23.111/~pub/DN/DN_masternode_payments_stats.html
also read the first post for more info and PoS reward breakdown

afaik there is no coin age

Thank you, now it is more clear.
With coin age I ment the time for the coins to mature and activly start to stake.

[DRPD]

Sorry guys I didn't get if you must be a MN in order to stake?

not sure what you mean
for staking you just need coins in your wallet, you don't have to run a mn
coins reserved for mn can't stake (see answer above)

Thank you for the reply.
If you can could you please tell me what is the benefit to run a MN and where I can get infos about staking rate, stake reward, coin age and stuff like that.
On presstab it is not clear, there I can see something like 0 DNET stake reward 0 days age  

you get better rewards for masternodes. atm:
Reward for last Block: 40.00 DNET
Reward from last Block for Miners/Stakers: 13.00 DNET
Reward from last Block for Masternodes: 27.00 DNET

this will change you can check rewards and splitting here: http://178.254.23.111/~pub/DN/DN_masternode_payments_stats.html
also read the first post for more info and PoS reward breakdown

afaik there is no coin age

Thank you, now it is more clear.
With coin age I ment the time for the coins to mature and activly start to stake.

minted (from staking and mn) coin's are available after 101 confirmations
but if you buy some coins there is no minimum age to stake afaik (jakiman or anybody else correct me if i'm wrong).
just transfer the coins to your wallet and begin to stake ...

cheers

[ccminer.net]

Sorry guys I didn't get if you must be a MN in order to stake?

not sure what you mean
for staking you just need coins in your wallet, you don't have to run a mn
coins reserved for mn can't stake (see answer above)

Thank you for the reply.
If you can could you please tell me what is the benefit to run a MN and where I can get infos about staking rate, stake reward, coin age and stuff like that.
On presstab it is not clear, there I can see something like 0 DNET stake reward 0 days age  

you get better rewards for masternodes. atm:
Reward for last Block: 40.00 DNET
Reward from last Block for Miners/Stakers: 13.00 DNET
Reward from last Block for Masternodes: 27.00 DNET

this will change you can check rewards and splitting here: http://178.254.23.111/~pub/DN/DN_masternode_payments_stats.html
also read the first post for more info and PoS reward breakdown

afaik there is no coin age

Thank you, now it is more clear.
With coin age I ment the time for the coins to mature and activly start to stake.

minted (from staking and mn) coin's are available after 101 confirmations
but if you buy some coins there is no minimum age to stake afaik (jakiman or anybody else correct me if i'm wrong).
just transfer the coins to your wallet and begin to stake ...

cheers

Thank you very much for your help.

just one last question:

I've read that in order to create a MN address I have to send exactly 10 000 DNET to that address.
So I think I'll start to mine with that address with the 10 000 DNET, but if I want to increase my stake weight, do I have to create a new MN address or I can deposit more coins to that address (the MN address created already)

Sorry for my newbie questions

[DRPD]

....

Thank you very much for your help.

just one last question:

I've read that in order to create a MN address I have to send exactly 10 000 DNET to that address.
So I think I'll start to mine with that address with the 10 000 DNET, but if I want to increase my stake weight, do I have to create a new MN address or I can deposit more coins to that address (the MN address created already)

Sorry for my newbie questions

hmmm i use different wallets as masternode controller and staking but i'm 99% sure that you should use a different address for staking coins  
send exactly 10k dnet to your mn address not more and not less otherwise the mn will maybe not work.

np we were all newbies once 

[ccminer.net]

....

Thank you very much for your help.

just one last question:

I've read that in order to create a MN address I have to send exactly 10 000 DNET to that address.
So I think I'll start to mine with that address with the 10 000 DNET, but if I want to increase my stake weight, do I have to create a new MN address or I can deposit more coins to that address (the MN address created already)

Sorry for my newbie questions

hmmm i use different wallets as masternode controller and staking but i'm 99% sure that you should use a different address for staking coins  
send exactly 10k dnet to your mn address not more and not less otherwise the mn will maybe not work.

np we were all newbies once 

So you do not stake with the MN wallet.
You just put there 10 000 DNET to let it "work"
than you stake with another address, where you can add or remove all the coins you wish, and you get the reward as Master node (so 27 DNET instead of 13 DNET)
the 10 000 of the MN will stay there "forever".
Am I right?

[borris123]

....

Thank you very much for your help.

just one last question:

I've read that in order to create a MN address I have to send exactly 10 000 DNET to that address.
So I think I'll start to mine with that address with the 10 000 DNET, but if I want to increase my stake weight, do I have to create a new MN address or I can deposit more coins to that address (the MN address created already)

Sorry for my newbie questions

hmmm i use different wallets as masternode controller and staking but i'm 99% sure that you should use a different address for staking coins  
send exactly 10k dnet to your mn address not more and not less otherwise the mn will maybe not work.

np we were all newbies once 

So you do not stake with the MN wallet.
You just put there 10 000 DNET to let it "work"
than you stake with another address, where you can add or remove all the coins you wish, and you get the reward as Master node (so 27 DNET instead of 13 DNET)
the 10 000 of the MN will stay there "forever".
Am I right?

i use the same wallet with multiple addresses in. you can stake your mn earnings then

[DRPD]

....

Thank you very much for your help.

just one last question:

I've read that in order to create a MN address I have to send exactly 10 000 DNET to that address.
So I think I'll start to mine with that address with the 10 000 DNET, but if I want to increase my stake weight, do I have to create a new MN address or I can deposit more coins to that address (the MN address created already)

Sorry for my newbie questions

hmmm i use different wallets as masternode controller and staking but i'm 99% sure that you should use a different address for staking coins  
send exactly 10k dnet to your mn address not more and not less otherwise the mn will maybe not work.

np we were all newbies once 

So you do not stake with the MN wallet.
You just put there 10 000 DNET to let it "work"
than you stake with another address, where you can add or remove all the coins you wish, and you get the reward as Master node (so 27 DNET instead of 13 DNET)
the 10 000 of the MN will stay there "forever".
Am I right?

not forever only as long as you wish to operate a masternode. you can use the 10k at any time if you wish

[ccminer.net]

....

Thank you very much for your help.

just one last question:

I've read that in order to create a MN address I have to send exactly 10 000 DNET to that address.
So I think I'll start to mine with that address with the 10 000 DNET, but if I want to increase my stake weight, do I have to create a new MN address or I can deposit more coins to that address (the MN address created already)

Sorry for my newbie questions

hmmm i use different wallets as masternode controller and staking but i'm 99% sure that you should use a different address for staking coins  
send exactly 10k dnet to your mn address not more and not less otherwise the mn will maybe not work.

np we were all newbies once 

So you do not stake with the MN wallet.
You just put there 10 000 DNET to let it "work"
than you stake with another address, where you can add or remove all the coins you wish, and you get the reward as Master node (so 27 DNET instead of 13 DNET)
the 10 000 of the MN will stay there "forever".
Am I right?

not forever only as long as you wish to operate a masternode. you can use the 10k at any time if you wish

thank you for your explanations