Avalon6 safety or how I burnt my avalon6

[philipma1957]

Okay the single board has been running okay. I thought I bricked the controller inside but I took it apart completely  and found it has a re set switch.


It is doing about 1600 gh

I set fans to 62  which keeps temps around 66c
When part comes today I will post tear down
and install of hash board along with location of re set switch


I also sent the dead board to sidehack maybe he can so something with it.



new board is in and works yeah

notice the hot board is 5 c higher




photos
Yan with good packing



pink bubble wrap antic static use it as a bed to assemble this




and a preinstalled heat sink

[judypug1956]

Spacer to avoid double posting.

[philipma1957]

This voids your warranty

I cut the seals everywhere and I un screw all screws








pull top off make sure all seals and labels are cut open

here is internal controller


re set button  brought my internal board back from the dead.

I powered on unit with top off and pressed the button counted to 10 and boom it worked again


controller removed


point of interest  this controller has 4 jacks for 4 boards and 2 jack for fans
thus running four boards on one controller may work

[cryptotore]

How loud is it if you run it with just 1 blade installed? 

[philipma1957]

How loud is it if you run it with just 1 blade installed?  

 

The same  as the fan needs to spin up to 2500-3000 rpm  in order to keep the one blade cool.
















































Please ignore this:

Paid, on time this week. Hope we get back on track. Thx guys.

Thanks it is appreciated being on time from me aswell.  Hope we are back on track for smooth sailing again to.

don't worry guys I will notice the wallet if its out of fund a 3 days before payments so that Marco should fill it always before payments.

Regards,
Bitcoin Boy.

So I did what you said I sent a pm to marcotheminer  no reply .

 Was I paid for the month of Jan?

And I checked into the site no btc  so 1 phone call wasted and more time wasted here.

I would like my btc

Paid, on time this week. Hope we get back on track. Thx guys.

Thanks it is appreciated being on time from me aswell.  Hope we are back on track for smooth sailing again to.

don't worry guys I will notice the wallet if its out of fund a 3 days before payments so that Marco should fill it always before payments.

Regards,
Bitcoin Boy.

So I did what you said I sent a pm to marcotheminer  no reply .

 Was I paid for the month of Jan?

And I checked into the site no btc  so 1 phone call wasted and more time wasted here.

Sent a new pm both to marcotheminer and to Bitcoin_BOy$  this time you guys have not paid my 0.40 btc

This is my  btc addy   3AEyE5qs23yF3AEjKVxEbyJe4KawqUmBjv on bit-x.com

I would like my btc.

   I would like my btc .

  I make it a simple flat rate plan so there are no complications.

  I give 795 post last month far more then you want or ask for.  This is the second month you are late.

Show me the coin please.

[/s]

[cryptotore]

Okay, thanks for reply!

Would it be possible to change the fans with quieter ones if you only run 1 blade in the enclousure?
You probably don't need the same kind of static pressure when there is only 1 heatsink to push air through?