Compac/R1/U3 - Overclock/Mod Showoff Thread

[kilo17]

Since posting mods and overclock results tends to divert most threads I thought I would start one.  Please use the following rules on this thread:

1- Post Mods and Overclock results for the Compac/R1/U3 only.  Will modify as new small miners are released.
2- For overclock results, please include pertinent info as shown below:
          - Freq-
          - Cooling;
          - Software
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.

Thanks

[1713449889]

1713449889

[1713449889]

1713449889

[1713449889]

1713449889

[kilo17]

Here is an overclock of a GekkoScience Compac;
Freq- 435
Cooling - Stock
Bfgminer 5.4.1 on a Raspi

[philipma1957]

Since posting mods and overclock results is diverts most threads I thought I would start one.  Please use the following rules on this thread:

1- Post Mods and Overclock results for the Compact/R1/U3 only.  Will modify as new small miners are released.
2- For overclock results, please include pertinent info like Freq. and cooling method.
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.

Thanks

Do you mean a compac from sidehack.

[kilo17]

Since posting mods and overclock results is diverts most threads I thought I would start one.  Please use the following rules on this thread:

1- Post Mods and Overclock results for the Compact/R1/U3 only.  Will modify as new small miners are released.
2- For overclock results, please include pertinent info like Freq. and cooling method.
3- On overclock posts, please have a minimum of a 5 minute run with minimal HW errors.

Thanks

Do you mean a compac from sidehack.

yes - damn spell check--

[kilo17]

Example of a modified Compac:
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad

[Guruclef]

Example of a modified Compac:
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad

Wow that looks cool! Does it perform better than your other stick ? (The stock one)

[kilo17]

Example of a modified Compac:
Modification- Solid copper heatsink applied with Arctic Silver Adhesive/Epoxy and stabilized with Arctic Thermal Pad

Wow that looks cool! Does it perform better than your other stick ? (The stock one)

I haven't pushed it yet but will soon.

[sobe-it]

These count? I can pull it off the shelf and give it some run time with each heat sink set up.

[kilo17]

I love the mods