Micon
Legendary
Offline
Activity: 1232
Merit: 1014
FPV Drone Pilot
|
|
February 02, 2013, 05:54:01 AM |
|
Paging Jgarzik. Party of one. Jgarzik, party of 1! Your seat at the ASIC table is ready. JGarzik, party of 1! I think this is one dinner you'll be happy to eat alone. I'm sure the fair and balanced mods will be all over this one and warn him for trolling. Disgusting coming from a guy claiming to be CEO of a company holding millions of community coin and dollars. And also more importantly taking away from the real discussion that is the dawn of the ASIC age of bitcoin mining, something Jeff Garzik is sure to be instrumental in the ushering in process, which he has done like a boss: Damn fine work Jeff. [and separately, bitcoin foundation] This important technology is best put first in the hands of the good guys. Do not let any drama derail your important work as the Avalon ASICs come online all over the world, further securing the network as long as too many of them don't work band together with a pool of FPGAs and work for evil.
|
|
|
|
crazyates
Legendary
Offline
Activity: 952
Merit: 1000
|
|
February 02, 2013, 05:59:58 AM |
|
Disgusting coming from a guy claiming to be CEO of a company holding millions of community coin and dollars.
I don't think he's the CEO, nor has he ever claimed to be.
|
|
|
|
keewee
Legendary
Offline
Activity: 1025
Merit: 1000
|
|
February 02, 2013, 06:17:44 AM |
|
Paging Jgarzik. Party of one. Jgarzik, party of 1! Your seat at the ASIC table is ready. JGarzik, party of 1! I think this is one dinner you'll be happy to eat alone. I'm sure the fair and balanced mods will be all over this one and warn him for trolling. Disgusting coming from a guy claiming to be CEO of a company holding millions of community coin and dollars. And also more importantly taking away from the real discussion that is the dawn of the ASIC age of bitcoin mining, something Jeff Garzik is sure to be instrumental in the ushering in process, which he has done like a boss: Trolling? I don't see his comment that way at all. It sounded like a light hearted jab at the "users" part of the thread title
|
1keewee2vRp63UWvPBynT55ZYw6SUCKDB
|
|
|
Nemesis
|
|
February 02, 2013, 06:20:54 AM |
|
Disgusting coming from a guy claiming to be CEO of a company holding millions of community coin and dollars.
I don't think he's the CEO, nor has he ever claimed to be. Some punk kid doesn't know the difference between COO and CEO. Are you surprised?
|
|
|
|
goxed
Legendary
Offline
Activity: 1946
Merit: 1006
Bitcoin / Crypto mining Hardware.
|
|
February 02, 2013, 06:25:08 AM |
|
Chip's power consumption is <6.6W/Ghs
ATX power loses(82%), DC/DC power loses(87%), Fan(5~20w), etc…
So…
650W * 0.82 * 0.87 - 20W = 443W, About right.
|
Revewing Bitcoin / Crypto mining Hardware.
|
|
|
kaerf
|
|
February 02, 2013, 06:38:22 AM |
|
Chip's power consumption is <6.6W/Ghs
ATX power loses(82%), DC/DC power loses(87%), Fan(5~20w), etc…
So…
650W * 0.82 * 0.87 - 20W = 443W, About right. so an equivalent bfl number would be something like: 60w / .87 / .82 + 2W (fan) + 5W (host) = 91 W (host can be discounted for many since it can run several units) or "bfl's worst case" 60W * 1.2 = 72W ===> 72w / .87 / .82 + 2W (fan) + 5W (host) = ~108W
|
|
|
|
jgarzik (OP)
Legendary
Offline
Activity: 1596
Merit: 1099
|
|
February 02, 2013, 06:53:38 AM |
|
Software bug: changing cgminer configuration claims to work at runtime, but does not. Thus, changing pool settings requires a reboot.
|
Jeff Garzik, Bloq CEO, former bitcoin core dev team; opinions are my own. Visit bloq.com / metronome.io Donations / tip jar: 1BrufViLKnSWtuWGkryPsKsxonV2NQ7Tcj
|
|
|
repentance
|
|
February 02, 2013, 07:00:56 AM |
|
Jeff, in your opinion what was the "surprise"? The extra slot seems a bit underwhelming to have been the surprise Avalon was talking up before delivery.
|
All I can say is that this is Bitcoin. I don't believe it until I see six confirmations.
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
February 02, 2013, 07:50:46 AM |
|
Software bug: changing cgminer configuration claims to work at runtime, but does not. Thus, changing pool settings requires a reboot.
Yes editing the configuration file has no effect on a running cgminer. There are other ways to do it of course ...
|
|
|
|
jgarzik (OP)
Legendary
Offline
Activity: 1596
Merit: 1099
|
|
February 02, 2013, 08:02:50 AM |
|
Software bug: changing cgminer configuration claims to work at runtime, but does not. Thus, changing pool settings requires a reboot.
Yes editing the configuration file has no effect on a running cgminer. Your comment is entirely unrelated to the problem at hand. The management software is fully capable of restarting cgminer.
|
Jeff Garzik, Bloq CEO, former bitcoin core dev team; opinions are my own. Visit bloq.com / metronome.io Donations / tip jar: 1BrufViLKnSWtuWGkryPsKsxonV2NQ7Tcj
|
|
|
sephtin
Newbie
Offline
Activity: 47
Merit: 0
|
|
February 02, 2013, 09:16:25 AM |
|
Maybe I missed it... As this is the "Avalon ASIC users thread", I was hoping to hear from other Avalon users... We're all aware of Jeff and the Foundation having received theirs... anyone else?
|
|
|
|
archetyp
Member
Offline
Activity: 92
Merit: 10
|
|
February 02, 2013, 11:33:56 AM |
|
Maybe I missed it... As this is the "Avalon ASIC users thread", I was hoping to hear from other Avalon users... We're all aware of Jeff and the Foundation having received theirs... anyone else?
yeah, I really like to order as well, what I fear is that avalon guys will mine for themselves for a while before shipping. but as long as they have the product and are willing to ship I am alright with that.
|
|
|
|
meowmeowbrowncow
|
|
February 02, 2013, 12:07:07 PM |
|
Any system needs to pay these extra power, including BFL.
Can we have honestly from one builder ONCE? You guys were doing so good up to this point. That is pure and utter crap and you know it to. The host in this case is a OpenWRT board pulling what 10W? Ok so 620W vs 610. Claiming 400W on your site is disingenous. Sure you have DC to DC losses so does anyone but that is part of the power load. AMD doesn't quote the power consumption of the raw chip when selling an entire graphics cards. They quote the card power usage which includes GPU, RAM, VRMS, fans, and any associated control circuitry. Your system doesn't use 400W. Don't advertise that it uses 400W. It uses ~600W. Claiming anything less and then saying "oh it needs a host" when you know the host board is pulling a tiny fraction of that is just plain dishonest. Period. 620W vs 400W is a 55% increase. That is significant. Rise above your competitors and start acting like a real company. You know a real one which wouldn't pull a stunt like this because they would be facing a class action lawsuit for blatant misreprenstation of a material fact. Yep. I'm surprised. This isn't a small matter. Quite a bit of spin, actually. To say that the full power load shouldn't be published as the first, and primary power usage figure is .... contrary to the standard practices of any consumer electronics equipment I can think of. It's kind of insulting to be told the sky is green.
|
"Bitcoin has been an amazing ride, but the most fascinating part to me is the seemingly universal tendency of libertarians to immediately become authoritarians the very moment they are given any measure of power to silence the dissent of others." - The Bible
|
|
|
kjj
Legendary
Offline
Activity: 1302
Merit: 1026
|
|
February 02, 2013, 12:12:01 PM |
|
DC Power supplies are marked by the DC wattage provided, not by the AC wattage consumed. There is nothing at all strange about a device marked "450W" pulling 600+ watts from the wall.
|
17Np17BSrpnHCZ2pgtiMNnhjnsWJ2TMqq8 I routinely ignore posters with paid advertising in their sigs. You should too.
|
|
|
bitmar
|
|
February 02, 2013, 12:21:43 PM |
|
Did you ever try it in p2pool
Yes, see the review linked in OP. or with a high diff share?
Yes, "vardiff" works on BTC Guild with this miner. After some very helpful advice from p2pool's author and #p2pool channel, it appeared to start working. Then Strange Things Happened. The miner and p2pool both started reporting very odd values for everything from hardware fan temperature to software share difficulty on the pool side.
So, it does not work with p2pool. right?
|
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
|
February 02, 2013, 01:10:32 PM |
|
Software bug: changing cgminer configuration claims to work at runtime, but does not. Thus, changing pool settings requires a reboot.
Yes editing the configuration file has no effect on a running cgminer. Your comment is entirely unrelated to the problem at hand. The management software is fully capable of restarting cgminer. Yes I know, I wrote the interface and the code that hooks into the internal functions to do all that without killing the software, but instead shut it down properly. The interface is called the API (I wrote almost all of the API) The commands to stop or restart it are 'quit' and 'restart' I also wrote the code that deals with who can access the API and the cgminer options that set that. None of that existed before November 2011 ... As for what is in there in their version? No idea. But most likely all they've done is get Xiangfu to add hooks into getting extra work for the 24? work items required to be sent to the device each time, instead of 1 (no it's not a bASIC/BFL MCU queue - oh well) and write a driver-xyz.c that uses that and fpgautils.c The screen output you show of the miner performance is directly from my API. Pity they didn't use miner.php (that I wrote) that's in there also ... Though since we don't have access to the source, they probably have a bug in there that ckolivas found today that doesn't release all work created ... and on a machine that creates work items 80x faster than a typical BFL FPGA Single, you can of course expect that memory issue to be way more obvious ...
|
|
|
|
rchapoteau
Newbie
Offline
Activity: 56
Merit: 0
|
|
February 02, 2013, 01:28:30 PM |
|
So does this mean that the 4 module unit will pull around 800w?
|
|
|
|
jgarzik (OP)
Legendary
Offline
Activity: 1596
Merit: 1099
|
|
February 02, 2013, 01:49:54 PM |
|
what I fear is that avalon guys will mine for themselves for a while before shipping.
They mined on a test pool, according to Yifu.
|
Jeff Garzik, Bloq CEO, former bitcoin core dev team; opinions are my own. Visit bloq.com / metronome.io Donations / tip jar: 1BrufViLKnSWtuWGkryPsKsxonV2NQ7Tcj
|
|
|
jgarzik (OP)
Legendary
Offline
Activity: 1596
Merit: 1099
|
|
February 02, 2013, 01:51:12 PM |
|
So, it does not work with p2pool. right?
Just mined all night on p2pool. It looks like fixing the air flow/physical configuration solved the issues. No miner or machine restarts while I was sleeping, and while it was mining p2pool. (no p2pool blocks either, alas)
|
Jeff Garzik, Bloq CEO, former bitcoin core dev team; opinions are my own. Visit bloq.com / metronome.io Donations / tip jar: 1BrufViLKnSWtuWGkryPsKsxonV2NQ7Tcj
|
|
|
coastermonger
Sr. Member
Offline
Activity: 367
Merit: 250
Find me at Bitrated
|
|
February 02, 2013, 02:20:27 PM |
|
What are the odds that you could get an Avalon to run with a program like 50miner or guiminer? I think the more pools you are able to use the better.
|
Bitrated user: Rees.
|
|
|
|