Avalon ASIC users thread

[goxed]

So how hot is too hot?

I'm running my batch 1 and batch 2 units at 350MHz now.  B1 seems to have settled on 47c for temp3, where B2 is at 52c now.  Ambient temperature here is somewhat high (28c).

I have to place my unit right at the mouth of AC vent to make sure temp3 < 50C.
 In SW USA, top floor

[1713255547]

1713255547

[loshia]

So how hot is too hot?

I'm running my batch 1 and batch 2 units at 350MHz now.  B1 seems to have settled on 47c for temp3, where B2 is at 52c now.  Ambient temperature here is somewhat high (28c).

I have to place my unit right at the mouth of AC vent to make sure temp3 < 50C.
 In SW USA, top floor

Dude,
Can you tell me batch one unit blue fan is it sucking or blowing cold air like PWMS?
Please take a look at my last post

[elasticband]

Blue fan pulls air into unit if I understand correctly

[ebereon]

If anyone is interested in power consumption of the different clocks:

300:


325:


350:


375:


I think this is very acurate 

greets,
ebereon

[loshia]

Blue fan pulls air into unit if I understand correctly

Yes you do i have just checked it and it is indeed. i get confused
10X

[loshia]

ebereon,
Great post about power!

What about hash rate at 375?
I am afraid to test it and as reported there is no big increase performance

[Kuma]

Is the measured consumption for 3 or 4 module Avalon? And what should be the recommended PSU wattage for 350 Mhz and 4 modules?

[ebereon]

ebereon,
Great post about power!

What about hash rate at 375?
I am afraid to test it and as reported there is no big increase performance

Thanks!

As you can see, I had it running only 1 minute. It had 180HW errors and ~15 shares. The hashrate was ~76GH... very bad and not healty.

Is the measured consumption for 3 or 4 module Avalon? And what should be the recommended PSU wattage for 350 Mhz and 4 modules?

This is for 3 module avalon batch#2 black (stock 750W PSU). Just calculate the Wattage for 3 module to 1 and you know what it will be for 4 module 

[elasticband]

And what should be the recommended PSU wattage for 350 Mhz and 4 modules?

+1. Iam going to upgrade 3avalons with a 4th module from my 4th unit..... eill this need more than 850w psu?  what psu Is highly recommended

[Kuma]

Is the measured consumption for 3 or 4 module Avalon? And what should be the recommended PSU wattage for 350 Mhz and 4 modules?

This is for 3 module avalon batch#2 black (stock 750W PSU). Just calculate the Wattage for 3 module to 1 and you know what it will be for 4 module 

Hmm 720W IMO seems to be too much for 750W PSU in the long term usage.

[elasticband]

325 should be ok on 750 psu?

[Kuma]

325 should be ok on 750 psu?

There is 14% reserve, so that should be OK. But it depends on quality of PSU.

[ebereon]

Is the measured consumption for 3 or 4 module Avalon? And what should be the recommended PSU wattage for 350 Mhz and 4 modules?

This is for 3 module avalon batch#2 black (stock 750W PSU). Just calculate the Wattage for 3 module to 1 and you know what it will be for 4 module  

Hmm 720W IMO seems to be too much for 750W PSU in the long term usage.

I think 750W is output power of the PSU. Should be ~900W@Wall.

At the moment I calculate 720W@Wall with ~80% effiziency = 576W PSU output. Thats fine I think.

[Kuma]

Is the measured consumption for 3 or 4 module Avalon? And what should be the recommended PSU wattage for 350 Mhz and 4 modules?

This is for 3 module avalon batch#2 black (stock 750W PSU). Just calculate the Wattage for 3 module to 1 and you know what it will be for 4 module 

Hmm 720W IMO seems to be too much for 750W PSU in the long term usage.

I think 750W is output power of the PSU.

At the moment I calculate 720W@Wall with ~80% effiziency = 576W PSU output. Thats fine I think.

Erm you are right. I haven't realized you measured it on the PSU input. My mistake.

[elasticband]

Is the measured consumption for 3 or 4 module Avalon? And what should be the recommended PSU wattage for 350 Mhz and 4 modules?

This is for 3 module avalon batch#2 black (stock 750W PSU). Just calculate the Wattage for 3 module to 1 and you know what it will be for 4 module  

Hmm 720W IMO seems to be too much for 750W PSU in the long term usage.

I think 750W is output power of the PSU. Should be ~900W@Wall.

At the moment I calculate 720W@Wall with ~80% effiziency = 576W PSU output. Thats fine I think.

so they should run 350 ok with stock PSU?

[ebereon]

so they should run 350 ok with stock PSU?

Thats what I do 

[elasticband]

so they should run 350 ok with stock PSU?

Thats what I do 

and it won't blow up while i sleep..... lol

[goxed]

The power consumption depends a lot on ambient temperature. My stock PSU consumes 850W at night and 950W during the day.
Upgraded to the Seasonic X-650 Gold 750W, and day power consumption reduced to 870W. All at 350MHz.

http://www.newegg.com/Product/Product.aspx?Item=N82E16817151087

[elasticband]

can anyone recommend replacement fans for  batch one?

[goxed]

can anyone recommend replacement fans for  batch one?

I am interested as well. These look like they can reach 4000rpm max. Will buy a couple in case one fails.