[ANN] Uther – Make Ethereum Better, based on Ethereum

[Acidx]

Uther? B-but what about mether

So it'll take more than 45 years before 72 million Uther are mined by others, and your share of everything is down to 50%.

After half a year of mining, you still have 99% of all the Uther out there, and everyone else combined has the other 1%.

I know you wanted a premine that rewards the devs but this overbalance is ridiculous. Your coin is dead. Goodbye

I don't think thats totally correct. 3 uther per coin currently at 220k means 660k uther mined in a little over 2 months, and according to this:

NEWS:

Foundation Contract:

• not higher then 388,800 per month payment
• before the end of April, 2M will transfer to the contract account
• before the end of June, rest will transfer

I'd say if dev is open and fair about the premined coins and starts setting up a campaign for miners interested then why not. I wouldn't call it dead as long as the network is working, at least notsofast. :3

[1714755724]

1714755724

[1714755724]

1714755724

[1714755724]

1714755724

[1714755724]

1714755724

[1714755724]

1714755724

[bytemuma]

any reward for translation in other language? 

[Acidx]

I like that low difficulty.

Block Number   230558
Received Time   2016-05-29 23:47:59 UTC
Difficulty   4367421289

[btc2nxt]

will write a Tips contract, which tips 10 accounts 3 times per day, so an account can snap 3 tips from the contract if user snaps fast enough. 

[uthercoin]

Hey I would be willing to set up a subreddit for uther and get some adoption going! Everyone loves fresh coins that can easily be mined!

Let me know if you are interested in this.

great idea thank you!

[uthercoin]

any reward for translation in other language? 

yes. which language?

[bytemuma]

any reward for translation in other language? 

yes. which language?

I can translate to Portuguese, I've done some translations in the forum. 

[c-cex]

still no update uther on c-cex

Having some issues with integrating. Already contacted dev. Work in progress...

[Lafu]

still no update uther on c-cex

Having some issues with integrating. Already contacted dev. Work in progress...

OK Thank you , We wait all already

[psyx80]

developer, there is a problem ether core work through the same port 41303 and turns the conflict with purses and GETH. simultaneous operation of 2 wallets impossible

[mikegi]

developer, there is a problem ether core work through the same port 41303 and turns the conflict with purses and GETH. simultaneous operation of 2 wallets impossible

I think Ethereum uses 30303. Anyway, the server could be bound to a different IP# (or run on a different host if there is a port conflict, though I think running p2p on a "non-standard" port should be ok).
RPC for the wallet should be possible on any port >=1024... Or lower if you like to run geth as root. :-)

[psyx80]

developer, there is a problem ether core work through the same port 41303 and turns the conflict with purses and GETH. simultaneous operation of 2 wallets impossible

I think Ethereum uses 30303. Anyway, the server could be bound to a different IP# (or run on a different host if there is a port conflict, though I think running p2p on a "non-standard" port should be ok).
RPC for the wallet should be possible on any port >=1024... Or lower if you like to run geth as root. :-)

 Listening on [::]:41303
I0530 19:16:42.753877 github.com/uther/go-uther/core/blockchain.go:565] Chain manager stopped
I0530 19:16:42.759378 github.com/uther/go-uther/eth/handler.go:200] Stopping ethereum protocol handler...
I0530 19:16:42.763379 github.com/uther/go-uther/eth/handler.go:221] Ethereum protocol handler stopped
I0530 19:16:42.766879 github.com/uther/go-uther/core/tx_pool.go:163] Transaction pool stopped
I0530 19:16:42.769879 github.com/uther/go-uther/eth/backend.go:496] Automatic pregeneration of ethash DAG OFF (ethash dir: C:\Users\MiningRIG_1\AppData\Ethash)
I0530 19:16:42.775380 github.com/uther/go-uther/p2p/nat/nat.go:111] mapped network port tcp:41303 -> 41303 (ethereum p2p) using NAT-PMP


if it launched ether wallet, if the air switch on and run it, he sees uther coins))

[mikegi]

developer, there is a problem ether core work through the same port 41303 and turns the conflict with purses and GETH. simultaneous operation of 2 wallets impossible

I think Ethereum uses 30303. Anyway, the server could be bound to a different IP# (or run on a different host if there is a port conflict, though I think running p2p on a "non-standard" port should be ok).
RPC for the wallet should be possible on any port >=1024... Or lower if you like to run geth as root. :-)

 Listening on [::]:41303
I0530 19:16:42.753877 github.com/uther/go-uther/core/blockchain.go:565] Chain manager stopped
I0530 19:16:42.759378 github.com/uther/go-uther/eth/handler.go:200] Stopping ethereum protocol handler...
I0530 19:16:42.763379 github.com/uther/go-uther/eth/handler.go:221] Ethereum protocol handler stopped
I0530 19:16:42.766879 github.com/uther/go-uther/core/tx_pool.go:163] Transaction pool stopped
I0530 19:16:42.769879 github.com/uther/go-uther/eth/backend.go:496] Automatic pregeneration of ethash DAG OFF (ethash dir: C:\Users\MiningRIG_1\AppData\Ethash)
I0530 19:16:42.775380 github.com/uther/go-uther/p2p/nat/nat.go:111] mapped network port tcp:41303 -> 41303 (ethereum p2p) using NAT-PMP


if it launched ether wallet, if the air switch on and run it, he sees uther coins))

I'm not sure about the latest release but in the first release the Genesis block needs to be set when starting for the first time.

Code:

./geth --genesis uther-genesis.json console

It's mentioned in the first post. (I'm still running Geth/v1.3.6  so can't say if it works on the right chain from a fresh install with 1.4.4)


Also the enode mentioned in the thread should speed up syncing... Looks like the only one mentioned in this thread is from ocminer which is also Geth/v1.3.6. Would be nice if the dev published an enode...

Code:

admin.addPeer("enode://96af71904742ab9cf73af953968aafe16852d2586f399165c0d4e82e6a751182901f0a3ba9be8aa64a0b51247b4ba98ef2b7bf4c98be5ab8b497288e6ef3e857@37.59.24.15:41303")

[psyx80]

developer, there is a problem ether core work through the same port 41303 and turns the conflict with purses and GETH. simultaneous operation of 2 wallets impossible

I think Ethereum uses 30303. Anyway, the server could be bound to a different IP# (or run on a different host if there is a port conflict, though I think running p2p on a "non-standard" port should be ok).
RPC for the wallet should be possible on any port >=1024... Or lower if you like to run geth as root. :-)

 Listening on [::]:41303
I0530 19:16:42.753877 github.com/uther/go-uther/core/blockchain.go:565] Chain manager stopped
I0530 19:16:42.759378 github.com/uther/go-uther/eth/handler.go:200] Stopping ethereum protocol handler...
I0530 19:16:42.763379 github.com/uther/go-uther/eth/handler.go:221] Ethereum protocol handler stopped
I0530 19:16:42.766879 github.com/uther/go-uther/core/tx_pool.go:163] Transaction pool stopped
I0530 19:16:42.769879 github.com/uther/go-uther/eth/backend.go:496] Automatic pregeneration of ethash DAG OFF (ethash dir: C:\Users\MiningRIG_1\AppData\Ethash)
I0530 19:16:42.775380 github.com/uther/go-uther/p2p/nat/nat.go:111] mapped network port tcp:41303 -> 41303 (ethereum p2p) using NAT-PMP


if it launched ether wallet, if the air switch on and run it, he sees uther coins))

I'm not sure about the latest release but in the first release the Genesis block needs to be set when starting for the first time.

Code:

./geth --genesis uther-genesis.json console

It's mentioned in the first post. (I'm still running Geth/v1.3.6  so can't say if it works on the right chain from a fresh install with 1.4.4)


Also the enode mentioned in the thread should speed up syncing... Looks like the only one mentioned in this thread is from ocminer which is also Geth/v1.3.6. Would be nice if the dev published an enode...

Code:

admin.addPeer("enode://96af71904742ab9cf73af953968aafe16852d2586f399165c0d4e82e6a751182901f0a3ba9be8aa64a0b51247b4ba98ef2b7bf4c98be5ab8b497288e6ef3e857@37.59.24.15:41303")

I will check now the old version, now I have version 1.4.4

[TheBossMan]

Hi guys. I have money in change addresses I want to move it all to a single address in the wallet do I just sweep the keys?
Have had a look but read some conflicting info on this process to thought better best to ask.

thanks

[eye-drop]

still no update uther on c-cex

Having some issues with integrating. Already contacted dev. Work in progress...

Anyone got any news from dev about this problem? Seems like its been going on for days.

[btc2nxt]

developer, there is a problem ether core work through the same port 41303 and turns the conflict with purses and GETH. simultaneous operation of 2 wallets impossible

I think Ethereum uses 30303. Anyway, the server could be bound to a different IP# (or run on a different host if there is a port conflict, though I think running p2p on a "non-standard" port should be ok).
RPC for the wallet should be possible on any port >=1024... Or lower if you like to run geth as root. :-)

right, Ethereum's Geth uses port 30303 as Uther's uses 41303, so the Geths should run at the same time without conflict.

Etherwallet uses IPC(internal  process connection) . If they have conflict ,maybe they share the same setting, i will have a look at it.

[btc2nxt]

Hi guys. I have money in change addresses I want to move it all to a single address in the wallet do I just sweep the keys?
Have had a look but read some conflicting info on this process to thought better best to ask.

thanks

just create a new address, and transfer the coins to the new address. Remember backup the keystore file.

[Acidx]

Hey Dev, if you need some help setting up a signature campaign, (now after waves finishes would be a good time) let me know. I can act as campaign manager and accept users that want to join. (I have moderated before)

You should start dividing up funds from the premine for these before hand and start creating some social platforms for Uther that people can start to follow.

[mikegi]

developer, there is a problem ether core work through the same port 41303 and turns the conflict with purses and GETH. simultaneous operation of 2 wallets impossible

I think Ethereum uses 30303. Anyway, the server could be bound to a different IP# (or run on a different host if there is a port conflict, though I think running p2p on a "non-standard" port should be ok).
RPC for the wallet should be possible on any port >=1024... Or lower if you like to run geth as root. :-)

right, Ethereum's Geth uses port 30303 as Uther's uses 41303, so the Geths should run at the same time without conflict.

Etherwallet uses IPC(internal  process connection) . If they have conflict ,maybe they share the same setting, i will have a look at it.

I wouldn't recommend it, especially not for productin but I suppose the same executable could be used for both Ethereum and Uther assuming separate data directories, correct genesis blocks and non conflicting ports are configured on the command line.