mrdunns
Newbie
 Offline
Activity: 33
Merit: 0
|
 |
July 19, 2017, 05:20:50 PM |
|
When setting this up where do you send the secondary coin your mining.
|
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
July 19, 2017, 06:37:21 PM |
|
When setting this up where do you send the secondary coin your mining.
USE A WALLET ADDRESS THAT YOU OWN-- Use the "-dwal" command to send the coins to an address that you own and control. And, please read the "Readme!!!.txt" file before you start mining. It may take a couple read-throughs to understand how to set up Claymore's miner. There are several examples in the readme, and on the Opening Page (OP) of this thread. --scryptr |
|
|
|
|
Socket54
|
|
July 19, 2017, 07:00:10 PM
Last edit: July 19, 2017, 08:48:38 PM by Socket54 |
|
I am having a bit of trouble starting this miner up. I am getting this error and not sure why so any help would be greatly appreciated: {"jsonrpc":"2.0","result":["0x00218ea06007476976060d6981fc54b9d59970fc80936077f4c44286afa29512","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]} I get a similar if not exact error with job timeouts etc etc whether i try dual mining or solo mining ETH only. Here is a snip of the log file if that will help. 15:03:29:498 1728 args: -epool eth.suprnova.cc:5005 -ewal BlueBills.BlueBills1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal BlueBills.BlueBills -dpsw x -allpools 1
15:03:29:498 1728
15:03:29:499 1728 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
15:03:29:499 1728 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 º
15:03:29:500 1728 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
15:03:29:500 1728
15:03:29:701 1728 ETH: 1 pool is specified
15:03:29:701 1728 Main Ethereum pool is eth.suprnova.cc:5005
15:03:29:702 1728 DCR: 1 pool is specified
15:03:29:702 1728 Main Decred pool is dcr.suprnova.cc:3252
15:03:29:963 1728 OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:017 1728 OpenCL platform: NVIDIA CUDA
15:03:30:018 1728 OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:019 1728 OpenCL initializing...
15:03:30:020 1728 AMD Cards available: 1
15:03:30:020 1728 GPU #0: Ellesmere, 8192 MB available, 36 compute units
15:03:30:020 1728 GPU #0 recognized as Radeon RX 480/580
15:03:30:020 1728 POOL/SOLO version
15:03:30:021 1728 b370
15:03:30:021 1728 Platform: Windows
15:03:30:068 1728 start building OpenCL program for GPU 0...
15:03:30:441 1728 done
15:03:30:685 1728 GPU #0: algorithm ASM
15:03:31:116 1728 CUDA initializing...
15:03:31:117 1728 NVIDIA Cards available: 1
15:03:31:117 1728 CUDA Driver Version/Runtime Version: 8.0/8.0
15:03:31:118 1728 GPU #1: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1
15:03:31:119 1728 Total cards: 2
15:03:34:761 1728 NVML version: 8.382.53
15:03:35:020 25fc ETH: Stratum - connecting to 'eth.suprnova.cc' <149.202.76.194> port 5005
15:03:35:109 1728 DUAL MINING MODE ENABLED: ETHEREUM+DECRED
15:03:35:110 1728 ETH: nicehash stratum mode
15:03:35:110 ba4 DCR: Stratum - connecting to 'dcr.suprnova.cc' <217.182.138.167> port 3252
15:03:35:112 1728 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
15:03:35:113 1728 Watchdog enabled
15:03:35:114 1728 Remote management (READ-ONLY MODE) is enabled on port 3333
15:03:35:115 1728
15:03:35:180 25fc send: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}
15:03:35:181 25fc send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:03:35:182 25fc send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills1","x"]}
15:03:35:183 25fc ETH: Stratum - Connected (eth.suprnova.cc:5005)
15:03:35:259 ba4 send: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}
15:03:35:260 ba4 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:03:35:260 ba4 send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills","x"]}
15:03:35:262 ba4 DCR: Stratum - Connected (dcr.suprnova.cc:3252)
15:03:35:412 ba4 got 579 bytes
15:03:35:412 ba4 buf: {"id":1,"result":[[["mining.notify","deadbeefcafebabeff6a050000000000"]],"c6d4e2a0d9c5c05b1cf7a8f4",12],"error":null}
{"id":null,"method":"mining.set_difficulty","params":[16]}
{"id":null,"method":"mining.notify","params":["acaf","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","c846cc7e26b0f67e268062ddb8875356ec6c7f47e1ebaf3cc442e2469e2d8c16a62916f53231e3d21ea621f4bbcd0cf892fd1441003c6f1126c01ab379fb6c8d0100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200e53300000fbb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb0f",false]}
15:03:35:412 ba4 parse packet: 117
15:03:35:413 ba4 remove first packet 461
15:03:35:414 ba4 new buf size: 461
15:03:35:415 ba4 parse packet: 58
15:03:35:415 ba4 remove first packet 402
15:03:35:416 ba4 new buf size: 402
15:03:35:417 ba4 parse packet: 401
15:03:35:418 ba4 new buf size: 0
15:03:35:553 ba4 got 36 bytes
15:03:35:590 ba4 buf: {"id":2,"result":true,"error":null}
15:03:35:591 ba4 parse packet: 35
15:03:35:592 ba4 DCR: Authorized
15:03:35:593 ba4 new buf size: 0
15:03:38:462 25fc checkread timeout
15:03:41:682 25fc checkread timeout
15:03:44:926 25fc checkread timeout
15:03:48:168 25fc checkread timeout
15:03:49:844 25fc got 236 bytes
15:03:49:845 25fc buf: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:49:846 25fc parse packet: 235
15:03:49:847 25fc Received unknown response: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:49:848 25fc new buf size: 0
15:03:52:666 ba4 got 401 bytes
15:03:52:666 ba4 buf: {"id":null,"method":"mining.notify","params":["acb0","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","d03938bd5a2167877421ed8c6c714d8fa398175698f25545e8c38e694d7a96598477890ac4e74a93bef2d093dcd29d71e15bee23fa08682b745482d2512711a70100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200bd3400002abb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb2a",true]}
15:03:52:666 ba4 parse packet: 400
15:03:52:666 ba4 new buf size: 0
15:03:52:667 ba4 DCR: 07/19/17-15:03:52 - New job from dcr.suprnova.cc:3252
15:03:52:667 ba4 target: 0x000000000ffff000 (diff: 68GH), block #152258
15:03:53:009 25fc got 236 bytes
15:03:53:009 25fc buf: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:53:009 25fc parse packet: 235
15:03:53:010 25fc Received unknown response: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:53:010 25fc new buf size: 0 |
Laugh Smile and Love
|
|
|
barismanco
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 19, 2017, 08:42:53 PM |
|
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
|
|
|
|
|
|
P00P135
|
|
July 19, 2017, 09:02:33 PM |
|
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Have you OC'd the card or modded the Bios? Could just be an unstable overclock or maybe not enough power from your power supply. |
|
|
|
|
|
Korsakopf
|
|
July 19, 2017, 09:04:54 PM |
|
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Try running the bat file from a Command window, then you can see if an error pops up instead of the window just closing. See https://www.windows-commandline.com/cmd-start-command/ on how to start a Command window in Windows. Good luck! |
|
|
|
|
barismanco
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 19, 2017, 09:08:22 PM
Last edit: July 21, 2017, 02:12:49 AM by mprep |
|
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Have you OC'd the card or modded the Bios? Could just be an unstable overclock or maybe not enough power from your power supply. I did not OC the card. Modded it before but windows could not recognise it. So I installed the default rom back. Now windows succesfully recognised. Until I start the miner, windows doesn't have problem. After miner starts, a few later screen turns off. I am using a 450 Watt power supply with just single card. I am not sure but I think this power is enough for single card.
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Try running the bat file from a Command window, then you can see if an error pops up instead of the window just closing. See https://www.windows-commandline.com/cmd-start-command/ on how to start a Command window in Windows. Good luck! I tried this just now. Nothing changed. I monitored with msi afterburner. Normally it works around 300 MHz. Whe miner starts, it goes 1209 MHz and display turns off. |
|
|
|
|
|
w0lf0.
|
|
July 19, 2017, 09:14:55 PM |
|
i have better hashrate with older  |
|
|
|
|
|
Socket54
|
|
July 19, 2017, 09:17:47 PM |
|
I am having a bit of trouble starting this miner up. I am getting this error and not sure why so any help would be greatly appreciated: {"jsonrpc":"2.0","result":["0x00218ea06007476976060d6981fc54b9d59970fc80936077f4c44286afa29512","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]} I get a similar if not exact error with job timeouts etc etc whether i try dual mining or solo mining ETH only. Here is a snip of the log file if that will help. 15:03:29:498 1728 args: -epool eth.suprnova.cc:5005 -ewal BlueBills.BlueBills1 -epsw x -esm 3 -dpool dcr.suprnova.cc:3252 -dwal BlueBills.BlueBills -dpsw x -allpools 1
15:03:29:498 1728
15:03:29:499 1728 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
15:03:29:499 1728 º Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v9.7 º
15:03:29:500 1728 ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
15:03:29:500 1728
15:03:29:701 1728 ETH: 1 pool is specified
15:03:29:701 1728 Main Ethereum pool is eth.suprnova.cc:5005
15:03:29:702 1728 DCR: 1 pool is specified
15:03:29:702 1728 Main Decred pool is dcr.suprnova.cc:3252
15:03:29:963 1728 OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:017 1728 OpenCL platform: NVIDIA CUDA
15:03:30:018 1728 OpenCL platform: AMD Accelerated Parallel Processing
15:03:30:019 1728 OpenCL initializing...
15:03:30:020 1728 AMD Cards available: 1
15:03:30:020 1728 GPU #0: Ellesmere, 8192 MB available, 36 compute units
15:03:30:020 1728 GPU #0 recognized as Radeon RX 480/580
15:03:30:020 1728 POOL/SOLO version
15:03:30:021 1728 b370
15:03:30:021 1728 Platform: Windows
15:03:30:068 1728 start building OpenCL program for GPU 0...
15:03:30:441 1728 done
15:03:30:685 1728 GPU #0: algorithm ASM
15:03:31:116 1728 CUDA initializing...
15:03:31:117 1728 NVIDIA Cards available: 1
15:03:31:117 1728 CUDA Driver Version/Runtime Version: 8.0/8.0
15:03:31:118 1728 GPU #1: GeForce GTX 1080 Ti, 11264 MB available, 28 compute units, capability: 6.1
15:03:31:119 1728 Total cards: 2
15:03:34:761 1728 NVML version: 8.382.53
15:03:35:020 25fc ETH: Stratum - connecting to 'eth.suprnova.cc' <149.202.76.194> port 5005
15:03:35:109 1728 DUAL MINING MODE ENABLED: ETHEREUM+DECRED
15:03:35:110 1728 ETH: nicehash stratum mode
15:03:35:110 ba4 DCR: Stratum - connecting to 'dcr.suprnova.cc' <217.182.138.167> port 3252
15:03:35:112 1728 "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
15:03:35:113 1728 Watchdog enabled
15:03:35:114 1728 Remote management (READ-ONLY MODE) is enabled on port 3333
15:03:35:115 1728
15:03:35:180 25fc send: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}
15:03:35:181 25fc send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:03:35:182 25fc send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills1","x"]}
15:03:35:183 25fc ETH: Stratum - Connected (eth.suprnova.cc:5005)
15:03:35:259 ba4 send: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}
15:03:35:260 ba4 send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
15:03:35:260 ba4 send: {"id": 2, "method": "mining.authorize", "params": ["BlueBills.BlueBills","x"]}
15:03:35:262 ba4 DCR: Stratum - Connected (dcr.suprnova.cc:3252)
15:03:35:412 ba4 got 579 bytes
15:03:35:412 ba4 buf: {"id":1,"result":[[["mining.notify","deadbeefcafebabeff6a050000000000"]],"c6d4e2a0d9c5c05b1cf7a8f4",12],"error":null}
{"id":null,"method":"mining.set_difficulty","params":[16]}
{"id":null,"method":"mining.notify","params":["acaf","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","c846cc7e26b0f67e268062ddb8875356ec6c7f47e1ebaf3cc442e2469e2d8c16a62916f53231e3d21ea621f4bbcd0cf892fd1441003c6f1126c01ab379fb6c8d0100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200e53300000fbb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb0f",false]}
15:03:35:412 ba4 parse packet: 117
15:03:35:413 ba4 remove first packet 461
15:03:35:414 ba4 new buf size: 461
15:03:35:415 ba4 parse packet: 58
15:03:35:415 ba4 remove first packet 402
15:03:35:416 ba4 new buf size: 402
15:03:35:417 ba4 parse packet: 401
15:03:35:418 ba4 new buf size: 0
15:03:35:553 ba4 got 36 bytes
15:03:35:590 ba4 buf: {"id":2,"result":true,"error":null}
15:03:35:591 ba4 parse packet: 35
15:03:35:592 ba4 DCR: Authorized
15:03:35:593 ba4 new buf size: 0
15:03:38:462 25fc checkread timeout
15:03:41:682 25fc checkread timeout
15:03:44:926 25fc checkread timeout
15:03:48:168 25fc checkread timeout
15:03:49:844 25fc got 236 bytes
15:03:49:845 25fc buf: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:49:846 25fc parse packet: 235
15:03:49:847 25fc Received unknown response: {"jsonrpc":"2.0","result":["0x17febd0e80ef67c973a69fccb72f2830b87d56f6241cc8c889bf7591b45bceb5","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:49:848 25fc new buf size: 0
15:03:52:666 ba4 got 401 bytes
15:03:52:666 ba4 buf: {"id":null,"method":"mining.notify","params":["acb0","675377d715c8c41ee291f144525950542e53a80b899fce9a0000003500000000","d03938bd5a2167877421ed8c6c714d8fa398175698f25545e8c38e694d7a96598477890ac4e74a93bef2d093dcd29d71e15bee23fa08682b745482d2512711a70100fdb6e54644c905001400569d00006253011a6d0a1a5901000000c2520200bd3400002abb6f590000000000000000","04000000",[],"04000000","1a015362","596fbb2a",true]}
15:03:52:666 ba4 parse packet: 400
15:03:52:666 ba4 new buf size: 0
15:03:52:667 ba4 DCR: 07/19/17-15:03:52 - New job from dcr.suprnova.cc:3252
15:03:52:667 ba4 target: 0x000000000ffff000 (diff: 68GH), block #152258
15:03:53:009 25fc got 236 bytes
15:03:53:009 25fc buf: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:53:009 25fc parse packet: 235
15:03:53:010 25fc Received unknown response: {"jsonrpc":"2.0","result":["0x28170338f2097f310478ce5b93ae6b19eb3796c1a5c166c3af195db1253af2fc","0x68fc811a18084465eab2e58f91e5dff9010c0bf8dbbf1dc799e61e23ab9cc904","0x00000000ffb34c02420e9948eacd78cf33b059a88ade1ff0614f7f3c303cf3a7"]}
15:03:53:010 25fc new buf size: 0 Just to add to this, i can successfully mine at miningpoolhub doing ETH+Sia without any error responses. |
Laugh Smile and Love
|
|
|
|
Skol600ml
|
|
July 19, 2017, 10:04:19 PM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs
Memory
MHz Mv
300 1000
1000 1000
2000 1000
Mhz | Timing Strap
1750 copy
2000 replace.
in flash/Bios 26 mhs
Memory
MHz Mv
300 900
1000 900
2000 900
Mhz | Timing Strap
1750 copy
2000 replace.
any ideas to get 28-30 mhs?
Coping 1750 isn't best option for Hynix 8gb. Seach for a better string. It's out there. My Gigabyte Aorus 8GB Hynix are still doing on eth 29.4. eth / 1.02 DRC on dual and 30.7 when dag isn't problem like Ubiq. |
|
|
|
|
|
TechPark
|
|
July 19, 2017, 11:22:33 PM
Last edit: July 21, 2017, 02:13:01 AM by mprep |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs
Memory
MHz Mv
300 1000
1000 1000
2000 1000
Mhz | Timing Strap
1750 copy
2000 replace.
in flash/Bios 26 mhs
Memory
MHz Mv
300 900
1000 900
2000 900
Mhz | Timing Strap
1750 copy
2000 replace.
any ideas to get 28-30 mhs?
Increase RAM clock to 2200 (or close to that, what is stable for you) Decrease GPU: 1200 MHz Decrease TDP: -10% With bios mod, it should give you 28-29-30 depending on the driver/miner version. (I suggest latest available from both + Creative Update for Windows) You cannot get 29-30 anymore with this card. You are 2 months late. That's because of the hashrate dropping for AMD cards on each epoch. The actual rate now is somewhere 27+. If someone else has better hashrate for this card, please share the bios. I have 5 rigs and have not noticed hashrate drop. The lastest screenshot: https://drive.google.com/file/d/0B1bdtLpUkQ3BQ3VfaDRLdlZBODQ/view?usp=sharingW10, 17.6.2, CD9.7, RX480 8GB x4, 1250/2075 The first card is connected to the monitor therefor OC not applied.
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Imagine asking a doctor: "I am dying, please help"... If you want help you have to provide as much information as possible! What is your Hardware, Software, Configuration, and etc? Post screenshots from GPU-Z, MSI AB, PBE, Claymore logs ant etc.... |
|
|
|
|
fluxdane
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 20, 2017, 03:58:40 AM
Last edit: July 21, 2017, 02:13:15 AM by mprep |
|
Any evga 1060 ftw or sc user can share their setting ? I can't pass 24.5 Mh/s
I have an 8 card rig of EVGA 06G-P4-6161-KR GeForce GTX 1060 6GB (single fan), since Claymore 9.7 I´m getting a max hash of 25,4mh/s per card (solo eth mining). My settings: Power Limit: 65% Temp Limit: 63 Cº Core Clock: 145 Mhz Memory Clock: 1000 Mhz Fan: 90% This whole rig pulls 700w. Cards temp is between 55ºC - 62ºC. Running stable 11 days now with abnove settings. Hope it helps Thanks for the setting but did you checked the watt meter from wall because I get 720-730 with 7 cards Wallmeter checked 704w, I’m solo mining eth. More info, CPU is Celeron, I have 4GB RAM and 2x750w Corsair PSUs.
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Imagine asking a doctor: "I am dying, please help"... If you want help you have to provide as much information as possible! What is your Hardware, Software, Configuration, and etc? Post screenshots from GPU-Z, MSI AB, PBE, Claymore logs ant etc.... If this happens only when dual mining you are probably expecting too much from your cards. If you see this happening sometimes when solo mining as well, then you have probably overclocked too much, or incompatible GPU BIOS settings. Here a few things you can try: Check overclocking settings, you may want to overclock less, resulting in less mh/s but more stable mining. When dual mining try to decrease -dcri for the second coin until your rig runs stable. Try also dual mining eth+another coin except SIA. Try dual mining SIA+another coin except eth. If nothing helps, you may have a faulty GPU or riser. Cheers |
|
|
|
|
mzeoatrakeb
Newbie
Offline
Activity: 25
Merit: 0
|
|
July 20, 2017, 05:19:04 AM |
|
Hello guys, I have GIGABYTE Radeon RX 580 GAMING 8GB
Its def give 21 mhs after flash 26mhs.
can someone help ? i would like got 28-30 mhs.
what I Did:
in flash/Bios 24 Mhs
Memory
MHz Mv
300 1000
1000 1000
2000 1000
Mhz | Timing Strap
1750 copy
2000 replace.
in flash/Bios 26 mhs
Memory
MHz Mv
300 900
1000 900
2000 900
Mhz | Timing Strap
1750 copy
2000 replace.
any ideas to get 28-30 mhs?
Coping 1750 isn't best option for Hynix 8gb. Seach for a better string. It's out there. My Gigabyte Aorus 8GB Hynix are still doing on eth 29.4. eth / 1.02 DRC on dual and 30.7 when dag isn't problem like Ubiq. what option do you have? can you share it? |
|
|
|
|
Yey09
Sr. Member
Offline
Activity: 632
Merit: 250
http://scientificcoin.com/
|
|
July 20, 2017, 09:30:32 AM |
|
Im getting 100% rejected Decred shares on decredpool.org, when using on nicehash only have 0-1%.
Where's the problem, decredpool.org?
|
|
|
|
|
Nightwolf81
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 20, 2017, 10:17:14 AM
Last edit: July 20, 2017, 10:29:29 AM by Nightwolf81 |
|
Hi folks,
got a little problem this time, maybe anyone can help me out.
Using a rig with the following components:
MB: MSI Z270 Pro
CPU: Core i3T
RAM: 16 GB RAM
GPU: 6x Palit Gamerock 1070 (upgrading to 8 this weekend)
PWR: Corsair 1000W Platinum (660 W @wall)
OS: Win 10 Pro
Driver: 372.10 64 bit
Running smoothly oc'ed (Core +125, Mem +725 (Hynix) while using Powertarget of 57 in MSI Afterburner) at a reported ETH hashrate of ~192 MH/s, so each card pulls slighty >32 MH/s.
So everything should be fine, but since i updated to 9.7, statistics in ethermine is showing massive drops in current effective hashrate, not recovering to around of the reported hasrate (if this would be the normal up-and-down I already knew from 9.6, everything would be fine).
But in 9.7 the effective hashrate drops just after 3 hours of mining to about 160, stayin' there.
Restarting the Claymore is solving this issue and effective hashrate is also going up to normal.
Anyone got the same problem, or any suggestions?
Wishing good earnings
Wolf
|
|
|
|
|
barismanco
Newbie
Offline
Activity: 3
Merit: 0
|
|
July 20, 2017, 11:01:19 AM |
|
Hi,
I started to use this dual miner. I want to mine ETH+SC.
When I start the .bat file, mining begins and a few seconds later, the display turns off and newer turns back on.
The computer freezes. I had to restart the computer.
Operating system: Windows 10
Graphic card: Sapphire RX570 Pulse 4GB
Driver version: 17.4.4 (I have also tried the other versions)
I didn't understand what happens.
Can anyone help me?
Thank you all.
Imagine asking a doctor: "I am dying, please help"... If you want help you have to provide as much information as possible! What is your Hardware, Software, Configuration, and etc? Post screenshots from GPU-Z, MSI AB, PBE, Claymore logs ant etc.... You are right. I am at work now. Later I'll share these infos too detalied. But as a summary(as I remember) Core2Duo processor, 160 GB 2.5" laptop harddrive, pegatron ipx41-d3 motherboard. 4+2 GB RAM (I also tried with single 4 GB) 450 watt atx power supply Claymore cryptonote 9.7 thank you. |
|
|
|
|
ne0x86
Newbie
Offline
Activity: 81
Merit: 0
|
|
July 20, 2017, 11:50:56 AM |
|
Im getting 1 incorrect share every 2 hours but always 0 rejected. Its normal? could be overclock or underlock?
Thanks
|
|
|
|
|
Nightwolf81
Newbie
Offline
Activity: 9
Merit: 0
|
|
July 20, 2017, 01:01:39 PM |
|
Im getting 1 incorrect share every 2 hours but always 0 rejected. Its normal? could be overclock or underlock?
Thanks
That's possible for your scenario (oc'ed and uv'ed). But I'm guessing 1 rejected share outta 400 isn't too bad at all..., is it? Greetz Wolf |
|
|
|
|
|
Coin++
|
|
July 20, 2017, 01:02:45 PM |
|
i have better hashrate with older With your free version ? |
|
|
|
|
Saphire
|
|
July 20, 2017, 01:18:08 PM |
|
I am doing Dual Mining for 3 days.
My Rig normally gives me 300-350$ Only ETH mode in one Month
Using ETH + SC it gives me extra +50/60$
Is there any more profitable Dual mining ?
|
|
|
|
|
|
