Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[nadrojcote]

For some reason I can dual mine with my amd cards no problem. I can find a perfect dcri setting that will not affect my ether rate. My Gtx 1060's lose hashrate no matter what the dcri is set to. Is this common? Or is this an issue with the software? It almost as if I get the same hashrate dual mining that I got before the nvidia optimizations were added.

[nadrojcote]

Claymore are you working on fixing the compatability with the newest beta driver that has the DAG fix?

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Some of my 570 and 480's are working fine, some 580's and 570's are not working. The commands for setting clock settings do not work for some of the cards. The voltage settings don't work for any of the cards.

[manotroll]

Claymore are you working on fixing the compatability with the newest beta driver that has the DAG fix?

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Some of my 570 and 480's are working fine, some 580's and 570's are not working. The commands for setting clock settings do not work for some of the cards. The voltage settings don't work for any of the cards.

broken link

[yuslav]

broken link

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx

[StephdeLyon]

I am using
4 sapphire rx470 nitro 8gb
Psu seasonic 1200w prime platinum
Risers v7 kyerivs

Your power supply looks more than enough to handle 4 gpus. Have you tried testing each gpu alone? Btw, you are adding 4 risers when you add all gpus. So have you tested each risers to make sure they are working as expected?

yes of course, these combinations are working well, crazy !
1
1+2
1+2+3
1+2+4

but not 1+2+3+4, its working on Windows and i see all gpus but claymore or over miners are not working.

[AzzAz]

I am using
4 sapphire rx470 nitro 8gb
Psu seasonic 1200w prime platinum
Risers v7 kyerivs

Your power supply looks more than enough to handle 4 gpus. Have you tried testing each gpu alone? Btw, you are adding 4 risers when you add all gpus. So have you tested each risers to make sure they are working as expected?

yes of course, these combinations are working well, crazy !
1
1+2
1+2+3
1+2+4

but not 1+2+3+4, its working on Windows and i see all gpus but claymore or over miners are not working.

Did you connect 3 risers on 1 power ( SATA ) cable?

[StephdeLyon]

I am using
4 sapphire rx470 nitro 8gb
Psu seasonic 1200w prime platinum
Risers v7 kyerivs

Your power supply looks more than enough to handle 4 gpus. Have you tried testing each gpu alone? Btw, you are adding 4 risers when you add all gpus. So have you tested each risers to make sure they are working as expected?

yes of course, these combinations are working well, crazy !
1
1+2
1+2+3
1+2+4

but not 1+2+3+4, its working on Windows and i see all gpus but claymore or over miners are not working.

Did you connect 3 risers on 1 power ( SATA ) cable?

No only 2 max, or 2 + 1 ssd for the first sata cable.

[TechPark]

hello
i have a big problem with the last version and all over miners. works with 3 cards and when i want to put 4 gpu cards on my rig, it crashes...
all the same cards, Under win10 fresh installed, AMD driver 17.4.4, stock cards, psu 1200w seasonic prime on asrock H81 rev2

risers are ok because:
- gpu 1+2+3 => ok
- gpu 1+2+4 => ok
- gpu 1+2+3+4 => ko...

claymore start well and detect the 4 gpu's but crashed before to start mining, just after GPU detect.

please help me !!

- Make sure the card is not sharing power with another card
- Make sure each riser not sharing its power with another riser
- Run all cards on stock BIOS and stock seetings
- Uninstall MSI AB or similar software
- Run DDU in safe mode
- Reinstall AMD driver, the latest
- Run Claymore with minimal settings -cvdcc 1000 -mvdcc 1500

Share results and screenshots from GPU-Z

[androstan1234]

So should we immediately install the new AMD beta driver to fix the DAG issue?  Then run patcher and restart?

[Call_Me_Bambi]

So should we immediately install the new AMD beta driver to fix the DAG issue?  Then run patcher and restart?

There is no officially released AMD beta driver, install the user hacked version at your own risk.

[TechPark]

I am using
4 sapphire rx470 nitro 8gb
Psu seasonic 1200w prime platinum
Risers v7 kyerivs

Your power supply looks more than enough to handle 4 gpus. Have you tried testing each gpu alone? Btw, you are adding 4 risers when you add all gpus. So have you tested each risers to make sure they are working as expected?

yes of course, these combinations are working well, crazy !
1
1+2
1+2+3
1+2+4

but not 1+2+3+4, its working on Windows and i see all gpus but claymore or over miners are not working.

Did you connect 3 risers on 1 power ( SATA ) cable?

No only 2 max, or 2 + 1 ssd for the first sata cable.

3+4 Works?

[Trimegistus]

Claymore are you working on fixing the compatability with the newest beta driver that has the DAG fix?

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-[Suspicious link removed]pute-Release-Notes.aspx

Some of my 570 and 480's are working fine, some 580's and 570's are not working. The commands for setting clock settings do not work for some of the cards. The voltage settings don't work for any of the cards.

If we need to use Wattman to tweak the cards' running parameters this is an useless driver update!

Someone has to come up with a fully functional WattTool replacement, if that is possible.

[P00P135]

So should we immediately install the new AMD beta driver to fix the DAG issue?  Then run patcher and restart?

There is no officially released AMD beta driver, install the user hacked version at your own risk.

Yes there is an official fix which was released today.  Look around the forums.

[LaBlanj]

i wanna mod my rx480s. Is there any stable mod for this gpu? and i am a newbie on mining , is it easy? Thank you

[StephdeLyon]

I am using
4 sapphire rx470 nitro 8gb
Psu seasonic 1200w prime platinum
Risers v7 kyerivs

Your power supply looks more than enough to handle 4 gpus. Have you tried testing each gpu alone? Btw, you are adding 4 risers when you add all gpus. So have you tested each risers to make sure they are working as expected?

yes of course, these combinations are working well, crazy !
1
1+2
1+2+3
1+2+4

but not 1+2+3+4, its working on Windows and i see all gpus but claymore or over miners are not working.

Did you connect 3 risers on 1 power ( SATA ) cable?

No only 2 max, or 2 + 1 ssd for the first sata cable.

3+4 Works?

yes 2+3+4 works so i suppose 3+4 also works

[Call_Me_Bambi]

So should we immediately install the new AMD beta driver to fix the DAG issue?  Then run patcher and restart?

There is no officially released AMD beta driver, install the user hacked version at your own risk.

Yes there is an official fix which was released today.  Look around the forums.

Is this the newly released beta drivers for the Vega card ?
I can't find any links for beta drivers for any other cards - can you post the link, thanks.

EDIT: Just found the link to the beta drivers  - Doh!

[Freedom808]

Could someone help me please.  Trying to figure out why I keep getting  this.



D:\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.3>EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal 0xe7F0F0dd64B618042AB58F52D31777a48D012050 -epsw x -eworker rig1
'EthDcrMiner64.exe' is not recognized as an internal or external command,
operable program or batch file.

[TechPark]

Could someone help me please.  Trying to figure out why I keep getting  this.



D:\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.3>EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal 0xe7F0F0dd64B618042AB58F52D31777a48D012050 -epsw x -eworker rig1
'EthDcrMiner64.exe' is not recognized as an internal or external command,
operable program or batch file.

Does such file exist?
Screeshots?

[Call_Me_Bambi]

Could someone help me please.  Trying to figure out why I keep getting  this.



D:\Claymore's Dual Ethereum+Decred_Siacoin_Lbry_Pascal AMD+NVIDIA GPU Miner v9.3>EthDcrMiner64.exe -epool stratum+tcp://us.ubiqpool.io:8008 -ewal 0xe7F0F0dd64B618042AB58F52D31777a48D012050 -epsw x -eworker rig1
'EthDcrMiner64.exe' is not recognized as an internal or external command,
operable program or batch file.

Windows Defender or your virus scanner has deleted EthDcrMiner64.exe thinking it's a virus - check it's still there.

[Call_Me_Bambi]

I've tried out the new official beta drivers on a small test rig, there was no need to apply the 'atikmdag-patcher' patch.
With 17.7.1 drivers I get 59Mh/s with beta drivers I get 61Mh/s.

http://support.amd.com/en-us/kb-articles/Pages/Radeon-Software-Crimson-ReLive-Edition-Beta-for-Blockchain-Compute-Release-Notes.aspx