Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Andrey123]

When you start a miner, one card shows 511 degrees!
Lord, I do not know what to do (
Card RX480 Sapphire

[mccampser]

When you start a miner, one card shows 511 degrees!
Lord, I do not know what to do (
Card RX480 Sapphire

i have the same on one of my rx580 ... does anyone have a solution ? i think it is damaged...

[mccampser]

rx vega 64
win 10
claymore dual 10.0
powersafe setting on wattman
eth 37.1 mh
lbc: 80.7 mh

[P00P135]

When you start a miner, one card shows 511 degrees!
Lord, I do not know what to do (
Card RX480 Sapphire

i have the same on one of my rx580 ... does anyone have a solution ? i think it is damaged...

Where does it show its 511 degrees?  If its only in claymore than it is probably just a bug.

[aaronsace]

When you start a miner, one card shows 511 degrees!
Lord, I do not know what to do (
Card RX480 Sapphire

It's not possible for your card to be 511°C. Must be a false reading. Check Radeon Settings temperature reading to determine if the problem is Claymore, AMD or your card.

[Xuper]

anyone knows why I do have spike hashrate ? I get between 275 to 360.before it was smooth , no spike.
Windows 10
12x RX 480 running at 1050Mhz@950mv/2000Mhz@default voltage  
Driver : DriverVer=08/08/2017, 22.19.659.0
claymore 9.8

[mccampser]

When you start a miner, one card shows 511 degrees!
Lord, I do not know what to do (
Card RX480 Sapphire

i have the same on one of my rx580 ... does anyone have a solution ? i think it is damaged...

Where does it show its 511 degrees?  If its only in claymore than it is probably just a bug.

from my side it was within ethos and also in windows with claymore 9.5.
card is long time laying around - will try it again with new setup and miner.

[wedatin]

When you start a miner, one card shows 511 degrees!
Lord, I do not know what to do (
Card RX480 Sapphire

It's not possible for your card to be 511°C. Must be a false reading. Check Radeon Settings temperature reading to determine if the problem is Claymore, AMD or your card.

If the card shows 511 c degree, that mean the card crashed. You need to reduce the frequency.

[Klaasje]

When you start a miner, one card shows 511 degrees!
Lord, I do not know what to do (
Card RX480 Sapphire

It's not possible for your card to be 511°C. Must be a false reading. Check Radeon Settings temperature reading to determine if the problem is Claymore, AMD or your card.

If the card shows 511 c degree, that mean the card crashed. You need to reduce the frequency.

99 times out of 100 511C means a PSU/RISER problem look at the connectors at the PSU

[junglistric]

I've been using Claymore on an unstable system - trying to narrow down the errors to stabilize the system but it is still crashing.  It has never mined for more than a day or so without crashing.

Now the console output gives zero indication of error, it just crashes or reboots after several hours or nearly immediately.

Z170A SLI PLUS
5 x gigabyte 1070
1200W EVGA platinum
win 8.1 64

[aaronsace]

I've been using Claymore on an unstable system - trying to narrow down the errors to stabilize the system but it is still crashing.  It has never mined for more than a day or so without crashing.

Now the console output gives zero indication of error, it just crashes or reboots after several hours or nearly immediately.

Z170A SLI PLUS
5 x gigabyte 1070
1200W EVGA platinum
win 8.1 64

Try just one card without riser then add parts from there.

[djentmining]

Awesome thanks for the new update works like a charm  

My Rig:

Asus Maximus Viii Hero
Kingston HyperX FURY 8GB (2x4GB) 2133MHz C14
Intel Pentium G4400 Skylake LGA1151
Corsair HX1200i PSU
6x Sapphire Nitro+ RX580 4GB Hynix Memory (Modded Bios)

Using smOS with the new update Claymore v10.0

Getting total average=  170.34 mh/s
GPU temps ~51℃ fans %67
Each GPU ~ 28.431 mh/s
Power Draw= 1092 Watts / Cost per KW/h ($) here in kuwait is 0.01 $

OC settings on smOS: Core 1215 MHz, Memory 2150 MHz, Powerstage 6, Target Temp 75℃, Minimum Fan speed 67%

Happy Mining guys  have a great day

[ZenFr]

Very good version for this 10th number of the Claymor's dual Ethereum + Decred/LbryCoin/SiaCoin/PascalCoin mining software :-).
I use only nVidia cards and I am very happy of the result.
Thanks a lot Claymore.

[JBear]

Anyone else having an issue mining ETC in solo mode? 

My activity isn't showing up on the pool side and I've tried it on ethermine and minergate.  Miner is showing normal activity, submissions, occasional rejects, etc., just the shares submitted and/or stats are not showing up at the pool.  There are no errors at start either.  My guess is that I don't have it configured correctly (and I'd love to be corrected on).

setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1-etc.ethermine.org:4444 -ewal 0xa013999da9a5e595b93540c6ee6fe705daf31491.orc1 -erate 0 -dcri 5 -platform 1 -mport 0 -mode 1 -wd 0

[Andrey123]

This temperature is shown by the msi afterburner 16 BETA.
Resetting the settings for overclocking the map by default did not help.
Maybe the truth is in the riser?

The power supply is good.....Corsair rm1000i
I do not think that the map could deteriorate (

[Temporel]

Afterburner v4.4.0 Beta 16

Hi,

where did you get the Beta 16 ? All I can find is Beta 12.

Thanks

[Call_Me_Bambi]

please update Claymore CryptoNote GPU Miner of Monero.It's a long time from last update.Besides,I guess mining Monero will get more money than mining ethereum at next year.
The most important is add dual mining function if it is possible.Thanks at first.

I second that emotion; if there can be any improvements to the Claymore Cryptonote miner it would be appreciated.

[arithon]

Need help from Ubuntu experts

Hi!  I need some help from Ubuntu experts.  I set up a test rig using the Sapphire Nitro+ RX580 on Windows 10, using Afterburner to do some mild overclocking - Stable on Claymore 9.8 with customised fan profile.  I flashed the bios with the Hynix timing straps and I am getting around 24mhs, which is not bad, but not great either.   It is stable.

However, when I tried set up an Ubuntu environment (16.04), I can get it stable at standard clock rates - however it crashes when I raised the clock rate using the flashed bios with the overclocked memory that works well in windows.   The fan seems to be kicking in very late, and I was getting 76 degrees at 25% fan. 

Here's a list of my questions that I hope the Ubuntu/Claymore experts can help with as I am a beginner in Ubuntu:

1.  I tried using the -tt and -fanmin command in Claymore.  I get the error message "Failed to set new fan speed, check if miner has root access!".   How do I set the miner to have root access?   Right now, I am starting the miner with the command in terminal "./mine.sh", where mine.sh is the claymore start file. 

2.  I am getting a list of error messages off the standard environment variables in Claymore.  As below:

"alvin@cryptominer-one:~/Desktop/Claymore98$ ./mine.sh
./mine.sh: line 1: export: `0': not a valid identifier
./mine.sh: line 2: export: `100': not a valid identifier
./mine.sh: line 3: export: `1': not a valid identifier
./mine.sh: line 4: export: `100': not a valid identifier
./mine.sh: line 5: export: `100': not a valid identifier?

Appreciate some insights into the above.

3.  -mclock 2100 doesn't seem to have any impact on the hash rate (standard is 2000).   Am I using it correctly?

4.  How do I monitor GPU status in Ubuntu?  Aticonfig doesn't seem to work.

Thanks!

[Claymore]

please update Claymore CryptoNote GPU Miner of Monero.It's a long time from last update.Besides,I guess mining Monero will get more money than mining ethereum at next year.
The most important is add dual mining function if it is possible.Thanks at first.

I second that emotion; if there can be any improvements to the Claymore Cryptonote miner it would be appreciated.

+1

I'm working on it already, currently I write assembler GPU kernels.

[Unclegogi]

Yes I always have the same exact issue, and once the hashrate dropped after losing connection to pool

I have reproduced this bug some more times.
GPUs are stuck in P0, P1 or P2 states after reconnection to pool.
Should I put same clocks in all states in BIOS?
Or should I force clocks with -cclock option?
Or should we wait fix in miner v10.1?