Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[wangdora]

I got a problem with my rig, at about 15 - 120 minutes mining, it will freeze / hang (default or overclocked same result), i need to get a hard restart for that.

My Rig:
Processor : Intel Core i3 6100 @ 3.70GHz
Motherboard : ASRock H270 Performance (CPUSocket)
RAM : Corsair DDR4 4GB 2133mhz
OS : Windows 10 Pro 64-bit
GPU : 6 x Gigabyte GTX 1070 Windforce 8GB
SSD : Kingston HyperX Fury 120GB
PSU : Corsair RM1000x 80+ Gold
Stabilizer : Prolink PVR2000D

All drivers are up to date (OS , GPU, BIOS)

what could be the cause of this problem?
any recommendations what should i do?

Thanks in advance

[Ursul0]

Dear Claymore,

sorry if this is a repeated question (already 831 pages difficult to read all)  

This version of your software is for dual mining (having ETH as the base coin). These are the options we can mine using it:
Ethereum
Ethereum + Decred
Ethereum + Siacoin
Ethereum + Lbry
Ethereum + Pascal

Do you have other software specific to mine only one coin (that is none of the above)?

For example I would like to use your software to mine EXP, UBQ or other coins. Can I use it? How?

Ethereum, EXP, UBIQ use same POW algo, so yes you can use it for those as well.
Go and read the first post

[AzzAz]

I got a problem with my rig, at about 15 - 120 minutes mining, it will freeze / hang (default or overclocked same result), i need to get a hard restart for that.

My Rig:
Processor : Intel Core i3 6100 @ 3.70GHz
Motherboard : ASRock H270 Performance (CPUSocket)
RAM : Corsair DDR4 4GB 2133mhz
OS : Windows 10 Pro 64-bit
GPU : 6 x Gigabyte GTX 1070 Windforce 8GB
SSD : Kingston HyperX Fury 120GB
PSU : Corsair RM1000x 80+ Gold
Stabilizer : Prolink PVR2000D

All drivers are up to date (OS , GPU, BIOS)

what could be the cause of this problem?
any recommendations what should i do?

Thanks in advance

Power...try with 5 cards (remove connectors from one )

[wangdora]

I got a problem with my rig, at about 15 - 120 minutes mining, it will freeze / hang (default or overclocked same result), i need to get a hard restart for that.

My Rig:
Processor : Intel Core i3 6100 @ 3.70GHz
Motherboard : ASRock H270 Performance (CPUSocket)
RAM : Corsair DDR4 4GB 2133mhz
OS : Windows 10 Pro 64-bit
GPU : 6 x Gigabyte GTX 1070 Windforce 8GB
SSD : Kingston HyperX Fury 120GB
PSU : Corsair RM1000x 80+ Gold
Stabilizer : Prolink PVR2000D

All drivers are up to date (OS , GPU, BIOS)

what could be the cause of this problem?
any recommendations what should i do?

Thanks in advance

Power...try with 5 cards (remove connectors from one )

okay i'll try that, but i got power meter, it shows 800-850 watt wouldn't it be enough for 1000w psu?

[crd007]

Is it somehow possible to turn of dual mining for specific GPUs?
I tried with setting -dcri 0,30 but it still mines with the first GPU. I want to just dual mine with the second GPU. Is this possible?

Yes
After you start your  miner press 0 twice
the first time it will disable your first gpu
the second time it will re enable it for eth only
A third press will enable dual mining on it again

Nice! Will try it. Thanks a lot!

[cod3gen]

Using Dual Mining on Claymore 10.0 with Vega 64 cards, Eth+Sia - its only rejecting Sia shares, why is this? Works on RX570, RX580, GTX1060 and GTX1070 without issues, however on Vega 64 not a single one is being accepted...? Any ideas?

[cjclm7]

Dear Claymore,

sorry if this is a repeated question (already 831 pages difficult to read all)  

This version of your software is for dual mining (having ETH as the base coin). These are the options we can mine using it:
Ethereum
Ethereum + Decred
Ethereum + Siacoin
Ethereum + Lbry
Ethereum + Pascal

Do you have other software specific to mine only one coin (that is none of the above)?

For example I would like to use your software to mine EXP, UBQ or other coins. Can I use it? How?

Ethereum, EXP, UBIQ use same POW algo, so yes you can use it for those as well.
Go and read the first post

okay, thanks, I think is this you referring to (bold text from page 1):

FEATURES:

- Supports new "dual mining" mode: mining both Ethereum and Decred/Siacoin/Lbry/Pascal at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.
- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code, optimized assembler kernels.
- Supports both AMD and nVidia cards, even mixed.
- No DAG files.
- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.
- Supports Ethereum and Siacoin solo mining.
- Supports both HTTP and Stratum for Decred.
- Supports both HTTP and Stratum for Siacoin. Note: not all Stratum versions are supported currently for Siacoin.
- Supports Stratum for Lbry and Pascal.
- Supports failover.
- Displays detailed mining information and hashrate for every card.
- Supports remote monitoring and management.
- Supports GPU selection, built-in GPU overclocking features and temperature management.
- Supports Ethereum forks (Expanse, etc).
- Windows and Linux versions.

[staman]

Guys, is there a easy way how to identify which GPU is which?
(like having and GPU3 hang-out but have no clue what card is it out of 8 cards!)

Is MSI AB numbering 1-8 equal to Claymore's 0-7 ?
AB1 = gpu0? , ab2= gpu1

I'm using simple method of increasing fan speed to 100% in AB to identify the cards but still not sure if this is the right way
thank you

[AzzAz]

I got a problem with my rig, at about 15 - 120 minutes mining, it will freeze / hang (default or overclocked same result), i need to get a hard restart for that.

My Rig:
Processor : Intel Core i3 6100 @ 3.70GHz
Motherboard : ASRock H270 Performance (CPUSocket)
RAM : Corsair DDR4 4GB 2133mhz
OS : Windows 10 Pro 64-bit
GPU : 6 x Gigabyte GTX 1070 Windforce 8GB
SSD : Kingston HyperX Fury 120GB
PSU : Corsair RM1000x 80+ Gold
Stabilizer : Prolink PVR2000D

All drivers are up to date (OS , GPU, BIOS)

what could be the cause of this problem?
any recommendations what should i do?

Thanks in advance

Power...try with 5 cards (remove connectors from one )

okay i'll try that, but i got power meter, it shows 800-850 watt wouldn't it be enough for 1000w psu?

Nvidia draw in bursts ( too fast for PM ) so maybe your psu has not enough "juice"

[peroz]

Hi guys,
Sorry if this ends up a totally noob question, but I just can grasp what's going on.
I started using Claymore's miner 10.0, mining only ethereum on ethermine.org.

The machine has 3x rx570 4gb and 1x rx470 4gb.

Everything was going fine, and it actually increased my average hashrate from 67Mh to 78Mh (reported around 83)

But then, all of a sudden, after 3 or 4 days of great use, the thing started lagging substantially. To the point of dropping connection and verry chopy hashrate chart in ethermine. A few times, I even had to hard reset the rig, because I couldn't access it via teamviewer. I tried mining with -ethi 4, and it kind of works, but hashrate is shit, and it still isn't no where near as stable as before on standard ethi setting.

What can I do to get my hashrates back?

[CryptoDeus]

New here, just wanted to give thanks for this miner.

[joaocha]

Hi Claymore ( or Anyone)

Im trying to use your api to automatic turn on>off dual mining at hot times during daytime

When i send getstat1 command, Using

echo '{"id":0,"jsonrpc":"2.0","method":"miner_getstat1"}' | MYIP MYPORT

I get the response with full statics ( IT WORKS FINE)

But When i try to disable>enable  Dual mining Using control_gpu

Disable

echo '{"id":0,"jsonrpc":"2.0","method":"control_gpu", "params":[-1, 1]}' | netcat MYIP MYPORT

Enable

echo '{"id":0,"jsonrpc":"2.0","method":"control_gpu", "params":[-1, 2]}' | netcat MYIP MYPORT

I get no response, and the gpus did not change the mining state, ( NOT WORKING =[ )

Im Doing something wrong?

Im using claymore 10.0 on linux Btw

Thanks in Advance

[SummersideGuy]

Hi guys,
Sorry if this ends up a totally noob question, but I just can grasp what's going on.
I started using Claymore's miner 10.0, mining only ethereum on ethermine.org.

The machine has 3x rx570 4gb and 1x rx470 4gb.

Everything was going fine, and it actually increased my average hashrate from 67Mh to 78Mh (reported around 83)

But then, all of a sudden, after 3 or 4 days of great use, the thing started lagging substantially. To the point of dropping connection and verry chopy hashrate chart in ethermine. A few times, I even had to hard reset the rig, because I couldn't access it via teamviewer. I tried mining with -ethi 4, and it kind of works, but hashrate is shit, and it still isn't no where near as stable as before on standard ethi setting.

What can I do to get my hashrates back?

You initial hashrate is not very good you should be getting 28+ per card so well over 100mhs
How much memory does your system have
How big is your PSU
Did you set 16 gig minimum of virtual memory
What is your operating system win 7/ win 10
Not enough information here to go on

[xeridea]

Guys, is there a easy way how to identify which GPU is which?
(like having and GPU3 hang-out but have no clue what card is it out of 8 cards!)

Is MSI AB numbering 1-8 equal to Claymore's 0-7 ?
AB1 = gpu0? , ab2= gpu1

I'm using simple method of increasing fan speed to 100% in AB to identify the cards but still not sure if this is the right way
thank you

I am pretty sure recent Claymore like 9.8 or 10.0 match AB ordering.  If you are not sure, set -di 0124567 to disable GPU 3 and see what one is not hot to the touch.

[papasmurf1337]

Claymore, why you not invest more time in NVIDIA dual mining for example, lot of people moved to NVIDIA, not still 90% are on AMD ...
I think 1070 is very powerfull card and can give much more than RX 580 in dual DCR/SIA ...
Also (you probably allready write, someone must asked before but lazy to find in so much pages) why your ZEC miner can't mine dual too?
Because on 1070 ZEC is now most profitable.

[steve12345]

Maybe someone can offer some advice.

I have 6 GPUs 2x 480 and 4x 580 in a rig.  They work great under the official Relive drivers. When I install the 8/23 blockchain drivers, the installer reboots in the middle of installation, and I never get to the skip relive screen.  I am using DDU in safe mode to uninstall.  I tried installing the drivers with only one card in the rig, and the install completes fine.  When I add cards one at a time, all is good till the 6th card.  Windows crashes when discovering/installing drivers for the 6th card.  Doesn't matter if the 6th card is a 480 or 580.  After the crash, only 4 or 5 cards are seen by windows.

Has anyone else experienced this?  Any tips?

Windows 10 64 bit
DDU safe mode uninstall
August 23 blockchain drivers
atikmdag-patcher
Claymore 10.0

Thanks!

[xeridea]

Claymore, why you not invest more time in NVIDIA dual mining for example, lot of people moved to NVIDIA, not still 90% are on AMD ...
I think 1070 is very powerfull card and can give much more than RX 580 in dual DCR/SIA ...
Also (you probably allready write, someone must asked before but lazy to find in so much pages) why your ZEC miner can't mine dual too?
Because on 1070 ZEC is now most profitable.

Nvidia cards don't do well dual mining, not sure technically why.

ZEC can't be dual mined, it is compute AND memory intensive.  Even 1080 TI is affected by GPU clocks while mining ZEC.

[tf2addict]

Is anyone running GTX 1070s and experiencing wild variations in hash rates second by second?  Full speed hash rate is just over 30 Mh/s but I'm seeing it swing between 19, 24, and 30 continuously.  It was more stable before, not sure what changed.  It's only 51C so it's not throttling due to temperature.

What memory?

What settings OC and Powerslide?

8GB.  90% power limit, +500 memory OC, -100 core underclock.  I've been running with these settings for almost two months but suddenly in the last day or so it's thrashing the hash rate.  Tried multiple miners (NiceHash and Claymore 10) and both do the same thing.  I'll reboot tomorrow when I have time to monitor it.

Deleted

[borderline]

please claymore make a fix!!! with beta driver amd every reboot i have speed different sometimes 29 mh sometimes 24 sometimes 19.. please fix this problem

[tf2addict]

please claymore make a fix!!! with beta driver amd every reboot i have speed different sometimes 29 mh sometimes 24 sometimes 19.. please fix this problem

That is exactly what I am seeing with my GTX 1070. It bounces around continuously.