Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Bibi187]

v10.1:

- now if miner has to recreate DAG for devfee, new DAG generation time will be included in devfee time.
- improved "-gser" option, now you can set custom delay between DAG generation on GPUs, check Readme for details.
- added detailed stats about rejected shares per GPU ("s" key).
- added "-logsmaxsize" option.
- fixed issues with "-r -1" option value.
- EthMan: added detailed stats mode in web server.
- a few minor bug fixes and improvements.

@Claymore

Can you update ETHMAN in a way that he can control diferent miners (EX: 1 miner mine ETH other one ZCASH)

Yeap it would be nice if we can mine ETHASH algo + EQUIHASH algo, it seems that work.

But i bet you can improve this manual tweak!

[numeratrix]

I was scratching my head unable to find the new AMD GPU Compute setting with the new driver. Seems it's not an isolated problem: https://community.amd.com/thread/221474

[Victorio]

I wrote on claymore's bat configuration -cclock 1400 the computer freeze and just with reset is rebooting. If i try to change this value with MSI AB is steel remain the default value 1340. With AMD drivers 23.20.782.0 ( 2.010.2017) is possible to change the gpu freq up to 1600 with MSI AB and the changes are semnificative ( 2-3 MH/s ).

Good luck killing your graphics cards!
Boy, how long ago have you heard first time about overclocking? Better sell away your rig and buy some Ether, you will earn more.

[leecher2k16]

i dont know why, but we all pay fee since beginning. Fee no problem, but a little more faster updates and hash improvments would be fine!

[Marvell2]

confirmed the wind 10 64 bit new drivers work for 10+ cards

I have a 10 GPU rig running now, what I did find is uninstalling afterburner first helps

also with so many GPU it would also sometimes hang on when u run claymore, I fixed this by using -gser 2 option

It still hangs when i try and dual mine so I need to do more tweaking.

ALso AMD settings and MSI after burner do not play nice togther, I decided to roll with wattman since I cannot set the voltages on this mortherboard

the ASUS 16 Slot one with MSI AB

Which GPU that you use on your rig?
pure AMD GPU  or mix with nvidia?

No all Rx570 and 470 mix , no nividia cards

Are you saying actually that you're running 10 AMD cards on WinX with "amd latest driver" - is this correct?
And if so what rates are you getting on ethash with this driver?

12 cards actually, just added two more this AM. and Yes thats correct.
hash rates are the same as block chain driver, the kicker is my systems are way more stable with this new driver

I had one rig of six R9 nano I upgraded to this new driver with modded evilop bios that used to crash one a day, its been two days with the new driver and its rock solid.

I also have not yet seen the issue i had before with the robin hood and beta blockchain driver where I would see hashrate of 8.33 or some crap sometimes, but its still
early.

Only issue with the new drivers is they can be hard to install, sometimes taking multiple DDU cleanings to install, and I HAD to remoVE AB.

I might install it back , becase wattman is crap

[bitcoin.dbi]

Hello. I am using claymore for dual mining for amd and nvidia cards at the same moment. In fact that nicehash DCR EU server fall a lot yesterday i added additional pools to Dpool file. But today i noticed that Nvidia card had problems with SIA pool and used additional pool from this file. So sure thing it couldnt mine SIA on DCR pool. Then i changed this file a bit. Can u tell me if i made it correct? Especially last part (dcoin dcr sc):

Code:

POOL: stratum+tcp://decred.usa.nicehash.com:3354, WALLET:3G2GAQW5GwAok3Ncifc7RZDBSDpwYVnpoR, PSW: x, ALLPOOLS: 1, -dcoin dcr
POOL: stratum+tcp://sia.usa.nicehash.com:3360, WALLET:3G2GAQW5GwAok3Ncifc7RZDBSDpwYVnpoR, PSW: x, ALLPOOLS: 1, -dcoin sc
POOL: stratum+tcp://sia.hk.nicehash.com:3360, WALLET:3G2GAQW5GwAok3Ncifc7RZDBSDpwYVnpoR, PSW: x, ALLPOOLS: 1, -dcoin sc
POOL: stratum+tcp://sia.br.nicehash.com:3360, WALLET:3G2GAQW5GwAok3Ncifc7RZDBSDpwYVnpoR, PSW: x, ALLPOOLS: 1, -dcoin sc
POOL: stratum+tcp://decred.br.nicehash.com:3354, WALLET:3G2GAQW5GwAok3Ncifc7RZDBSDpwYVnpoR, PSW: x, ALLPOOLS: 1, -dcoin dcr
POOL: stratum+tcp://decred.hk.nicehash.com:3354, WALLET:3G2GAQW5GwAok3Ncifc7RZDBSDpwYVnpoR, PSW: x, ALLPOOLS: 1, -dcoin dcr
  
  

[RuMiner]

Hi @Claymore! Thanks for improvements.
I have one wish for Miner Manager It would be nice to see throttle % by -ttli via web. I think it's more useful data than rigs internal IP...

[adaseb]

Claymore,

I respect you alot and everything. But you really need to start posting some kind of SHA checksum or some GPG to verify your downloads. Every single download of yours comes up as a virus now.

Most bitcoin and crypto related software usually includes some type of checksum so the download can be verifed. Aside from Bitcoin Core this is probably the most widely downloaded crypto related software.

Please start posting the checksum.

[NavyCuda]

Hi,
please submit the updated new hashrates to gpustats.com
https://gpustats.com

How much are you paying for the stats?  I’m not submitting anything unless I get paid for it.

[percy_tc]

Hi,
please submit the updated new hashrates to gpustats.com
https://gpustats.com

How much are you paying for the stats?  I’m not submitting anything unless I get paid for it.

 

[heavyarms1912]

Claymore,

I respect you alot and everything. But you really need to start posting some kind of SHA checksum or some GPG to verify your downloads. Every single download of yours comes up as a virus now.

Most bitcoin and crypto related software usually includes some type of checksum so the download can be verifed. Aside from Bitcoin Core this is probably the most widely downloaded crypto related software.

Please start posting the checksum.

+1 to this.

[Ultrasonik]

Claymore, I respect you alot and everything. But you really need to start posting some kind of SHA checksum or some GPG to verify your downloads. Every single download of yours comes up as a virus now.
...

Kaspersky Anti-Virus does not detect viruses in these versions
I download the link "mega"

How will the checksum help?

i like v10.1,  good improvement!

[Ursul0]

confirmed the wind 10 64 bit new drivers work for 10+ cards

I have a 10 GPU rig running now, what I did find is uninstalling afterburner first helps

also with so many GPU it would also sometimes hang on when u run claymore, I fixed this by using -gser 2 option

It still hangs when i try and dual mine so I need to do more tweaking.

ALso AMD settings and MSI after burner do not play nice togther, I decided to roll with wattman since I cannot set the voltages on this mortherboard

the ASUS 16 Slot one with MSI AB

Which GPU that you use on your rig?
pure AMD GPU  or mix with nvidia?

No all Rx570 and 470 mix , no nividia cards

Are you saying actually that you're running 10 AMD cards on WinX with "amd latest driver" - is this correct?
And if so what rates are you getting on ethash with this driver?

12 cards actually, just added two more this AM. and Yes thats correct.
hash rates are the same as block chain driver, the kicker is my systems are way more stable with this new driver

I had one rig of six R9 nano I upgraded to this new driver with modded evilop bios that used to crash one a day, its been two days with the new driver and its rock solid.

I also have not yet seen the issue i had before with the robin hood and beta blockchain driver where I would see hashrate of 8.33 or some crap sometimes, but its still
early.

Only issue with the new drivers is they can be hard to install, sometimes taking multiple DDU cleanings to install, and I HAD to remoVE AB.

I might install it back , becase wattman is crap

that's interesting. is that a win update, or just driver? you should try to use overdriventool for clocks and volts, it's better then claymore - as you can set proper stages as well.
also AB is known to have nasty issues

[Jahus]

Hello, I would like to know if it is possible to mine through an SSH tunnel, or simple proxy set in Windows "Internet Options" settings.

Thank you.

[vapourminer]

Claymore,

I respect you alot and everything. But you really need to start posting some kind of SHA checksum or some GPG to verify your downloads. Every single download of yours comes up as a virus now.

Most bitcoin and crypto related software usually includes some type of checksum so the download can be verifed. Aside from Bitcoin Core this is probably the most widely downloaded crypto related software.

Please start posting the checksum.

+1 to this.

and another +1

[Marvell2]

confirmed the wind 10 64 bit new drivers work for 10+ cards

I have a 10 GPU rig running now, what I did find is uninstalling afterburner first helps

also with so many GPU it would also sometimes hang on when u run claymore, I fixed this by using -gser 2 option

It still hangs when i try and dual mine so I need to do more tweaking.

ALso AMD settings and MSI after burner do not play nice togther, I decided to roll with wattman since I cannot set the voltages on this mortherboard

the ASUS 16 Slot one with MSI AB

Which GPU that you use on your rig?
pure AMD GPU  or mix with nvidia?

No all Rx570 and 470 mix , no nividia cards

Are you saying actually that you're running 10 AMD cards on WinX with "amd latest driver" - is this correct?
And if so what rates are you getting on ethash with this driver?

12 cards actually, just added two more this AM. and Yes thats correct.
hash rates are the same as block chain driver, the kicker is my systems are way more stable with this new driver

I had one rig of six R9 nano I upgraded to this new driver with modded evilop bios that used to crash one a day, its been two days with the new driver and its rock solid.

I also have not yet seen the issue i had before with the robin hood and beta blockchain driver where I would see hashrate of 8.33 or some crap sometimes, but its still
early.

Only issue with the new drivers is they can be hard to install, sometimes taking multiple DDU cleanings to install, and I HAD to remoVE AB.

I might install it back , becase wattman is crap

that's interesting. is that a win update, or just driver? you should try to use overdriventool for clocks and volts, it's better then claymore - as you can set proper stages as well.
also AB is known to have nasty issues

the image I use for win 10 includes the anniversery update , so I think you do need that update
one new problem ,

on the last two rigs i updated to the new driver wont let me change the mem or core clocks using
any tool

wattman , overdriven tool or ab nothing works, it immediatle goes back or with
overdriven tool does not change

[ingyenfrag]

No hashrate improvement on 6*vega 56 rig with blockchain driver.
Power usage is better by 7W on the whole rig. 1133-->1126   

[tist006]

Anyone know why claymore keeps defaulting to eth+dcr? Attempting to set it to eth+sia.
Connects to eth fine but sia returns errors

DCR: Failed to get nonc1 to initiate_stratum
DCR: Job timeout, disconnect, etc.

EthDcrMiner64.exe -mode 0 -epool eth-us-east1.nanopool.org:9999 -ewal address/worker/email -epsw x -dcoin sia -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address/worker/email -dpsw x

-dcoin is set to sia so I am confused as to why this keeps happening. Tried multiple claymore versions.

[simon66]

Anyone know why claymore keeps defaulting to eth+dcr? Attempting to set it to eth+sia.
Connects to eth fine but sia returns errors

DCR: Failed to get nonc1 to initiate_stratum
DCR: Job timeout, disconnect, etc.

EthDcrMiner64.exe -mode 0 -epool eth-us-east1.nanopool.org:9999 -ewal address/worker/email -epsw x -dcoin sia -dpool stratum+tcp://sia-us-east1.nanopool.org:7777 -dwal address/worker/email -dpsw x

-dcoin is set to sia so I am confused as to why this keeps happening. Tried multiple claymore versions.

Thats because "-dcoin sia" is not a valid option. Try "-dcoin sc"

[Raimy]

I'll check it out, thanks for the update.

Anyone know why I need to sometime launch Claymore's miner twice on startup to get my full hashrate?

For example, after a rig reboots, i launch the miner and the first GPU reports 30 Mh/s, and the rest report maybe 26 Mh/s. But if I close the miner and restart the program, on the second try they are all reporting correctly at 30 Mh/s.

Would the -gser setting help with this?